Racks, White
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
25mm, 40-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
Unwire Polypropylene Test Tube Peg Racks
Thermo Scientific NalgeneAutoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…
-
Abdos Tube Rack
Foxx Life SciencesThese innovative Double Jumbo Test Tube Racks made of Polypropylene (PP) are used for high capacity storage for tubes, vials and Vessels. Extremely suitable for high throughput labs requiring large sample storage. Manufactured from sturdy and lightweight material suitable for easy movement and…
-
Fiberglass-Reinforced Peg Racks
Heathrow ScientificStrong, tough, versatile, and attractive Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Spacious peg design allows easy viewing of tube contents. User can also turn tubes upside-down and use as a drying rack! Fiberglass…
-
Microcentrifuge Tube Racks
United Scientific SuppliesStackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C). Autoclavable.
-
20-Place Heavy Duty Microtube Racks
Globe ScientificAutoclavabe Reinforced polypropylene (PP) for strength and durability Rubber feet provide stability on slick surfaces Numeric markings for sample identification Compatible with both 1.5 and 2mL microtubes Dimensions (L x W x H): 209 x 71 x 35mm (8.25" x 2.75" x 1.4")
-
Round Floating Microtube Racks
Thermo Scientific NalgeneFor incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…
-
pH Meter Supplies Organizer
TrippNTFor organizing pH buffers, reagents, cups, pipettes, wipers, pens and calculator in the laboratory. Keeps supplies organized, clean and available Distance between shelves accommodates tall bottles Sits on bench and only 6 inch
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Polycarbonate Rack
Thermo Scientific NalgeneHolds up to eight 250-500 mL bottles (bottles not included) Bottles held securely by bottom pan depression and upper grid Telescoping handle stays out of the way for convenient storage Rack will not tip over Autoclavable
-
Regular Upright Freezer Drawer Racks with 2" White Freezer Boxes
Crystal TechnologiesUpright Drawer Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/ Dividers.
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".
-
Polypropylene Test Tube Racks
BrandTech®Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.
-
Adapt-A-Rack®
Heathrow ScientificEach slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…
-
Bottle Holders
TrippNT1781Q25 TrippNT's Single ABS Bottle Holder 500mL keeps your bottles upright and secures. It stabilizes top heavy bottles and stores one 500mL bottle. This product line has keyholes for mounting with provided hardware. 1781Q27 TrippNT's Double ABS Bottle Holder 500mL…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
Snap Racks™
J.G. FinneranSnap Racks™ are constructed of durable glass reinforced polypropylene, with a center well to conveniently hold caps, seals, septa, etc. Racks snap together securely to double your rack capacity.
-
Regular Upright Freezer Racks with 2" White Freezer Boxes
Crystal TechnologiesUpright Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/81 Place Dividers.
-
Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…
-
SmoothRack Test Tube Racks
FTR EnterprisesThe next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
12 - 13mm, 90-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
Scienceware® Thermometer Rack
SP Bel-ArtPolypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Test Tube Peg Racks
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Polycarbonate Test Tube Racks
United Scientific SuppliesPolycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.
-
Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.