Kemtech America Glass Joints & Adapters
-
SYNTHWARE Graduated Distilling Cow Receiver
Kemtech AmericaTubes are graduated from 0-3mL in 0.2mL subdivisions.
-
Synthware rotary evporator anti-splash trap, modified. With extra coarse porosity fritted disc sealed above lower inner joint. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. Frit reduces foam overflow from being…
-
SYNTHWARE Short Path Vacuum Jacketed Distillation Apparatus
Kemtech AmericaVacuum jacketed design for more efficiency. When a thermometer is inserted in the top of this apparatus, the bulb and stem serve as column packing. The close coupled condenser and vacuum connection offer and extremely short condensate travel path. Used with 25mm immersion thermometer, and D27…
-
SYNTHWARE Adapter with #15 O-Ring Joint to 10mm Hose Connection
Kemtech AmericaAdapter #15 O-ring joint to 10 OR 16mm Hose Connection
-
Synthware Vacuum Adapters with Glass Stopcocks, Straight
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
SYNTHWARE Snyder Distillation Column
Kemtech AmericaSnyder Distillation Column, 3 Section Top Outer Joint: 24/40 Lower Inner Joint: 24/40 Column Height: 150mm Overall Height: 300mm For use with Kuderna-Danish flask.
-
Synthware Flushing Adapters
Kemtech AmericaSynthware flushing adapter is used to flush and fill attached vessels with an inert gas to provide protective storage. A ballon is connected to the top hose connection. An inert gas is connected to the side hose connection. The ballon can be expanded with inert gas at the same time as the vessel or…
-
SYNTHWARE Peptide Synthesis Vessels, Solid Phase
Kemtech AmericaPeptide Synthesis Vessel, Solid Phase, Synthware, Capacity: Available in sizes ranging from 10-50mL, Frit Porosity: Coarse or Medium, Frit Diameter: Available in sizes ranging from 15-25mm, GL Thread: 14 or 25 available, Arm OD: 8mm, Supplied with a PTFE lined cap and straight bore PTFE stopcock…
-
Synthware Rotary Evaporator Anti-Splash Traps with Fritted Discs
Kemtech AmericaSynthware rotary evporator anti-splash trap with extra coarse fritted disc. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. the frit reducesfoam from being carryover. With upper outer and lower inner standard taper joints.
-
SYNTHWARE Distilling Heads for 76mm Thermometers
Kemtech AmericaThermometer joint is 10/18 for 76mm immersion thermometer. Side arm is at 75° angle.
-
-
Synthware Inlet/Thermometer Adapters
Kemtech AmericaAdapter has a Nylon compression cap and a Viton o-ring to form a vacumm tight seal. Cap accommodates 5.0 - 7.5mm O.D. thermometer or gas inlet tube. To use it as a syringe port, simply replace the o-ring with a PTFE-lined septum. Supplied with one Nylon cap and one Viton o-ring.
-
Synthware Vacuum Filtration Adapters
Kemtech AmericaUsed with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.
-
Synthware Vacuum Adapters with Glass Stopcocks, 90°
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Vacuum/Argon/Nitrogen Inlet Adapters
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.
-
Synthware Vacuum Take-Off Adapters
Kemtech AmericaSynthware vacuum take-off adapter with drip tip. The upper outer and lower inner standard taper joints are the same size.
-
SYNTHWARE Vacuum Adapter with PTFE Stopcock
Kemtech AmericaVacuum Adapter, Microscale, PTFE Stopcock, Synthware, Joint: 14/10, Stopcock Bore: 2mm, Hose Connection OD: 8mm.
-
SYNTHWARE Distillation Receiving Set
Kemtech AmericaComes with Synthware Distilling Adapter (Joints: 14/20 or 19/22) and Cow Receivers (Joints: 14/20 or 19/22). Designed without hose connection to be used with D10 distillation apparatus. **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
SYNTHWARE Craig Recrystallization Tube
Kemtech AmericaCraig Recrystallization Tube, Synthware, Complete with glass outer tube and inner plug, Capacity Below Grind: 2mL.
-
SYNTHWARE Shortpath Distilling Head for Volatile Distillants
Kemtech AmericaWith the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. With Vigreux Indentations.
-
Synthware Tapered Distilling Adapters
Kemtech AmericaWith an outer standard taper joint at the top. The tapered delivery drip tube extends into open receivers.
-
SYNTHWARE T-Shaped Connecting Tubes
Kemtech AmericaConnecting Tube, T-shaped, Synthware, Tubing OD: 8 and 10mm available.
-
Synthware Connecting Adapters
Kemtech AmericaSynthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.
-
Synthware Straight Drying Tubes
Kemtech AmericaSynthware straight drying tube. With top outer and lower inner standard taper joints of the same size.
-
Synthware "U" Shaped Drying Tubes
Kemtech AmericaSynthware "U" shaped drying tube. With a lower inner standard taper joint. Cotton is typically used to contain drying agent.
-
Synthware Kjeldahl Distilling Trap Adapters
Kemtech AmericaAdapter is placed above flask to prevent carry-over of reactions which have a tendency to foam. With top outer and lower inner standard taper joints.
-
Synthware Long Stem Inlet Adapters
Kemtech AmericaSynthware long stem inlet adapter. With standard taper top outer joint and lower inner joint with sealed in lower tube extending below the inner joint.
-
Synthware Rotary Evaporator Vapor Ducts
Kemtech AmericaSynthware rotary evaporator vapor duct. Precision ground and polished. Meet manufacturer's standards. With standard taper inner joint.
-
-
SYNTHWARE Solvent Still Head, High Vacuum Valves
Kemtech AmericaSolvent Still Head, High Vacuum Valves Capacity: 250mL Joints: 24/40 Valve Size: 0-4mm
-
Synthware Inlet Adapters with Extra Coarse Discs
Kemtech AmericaSynthware inlet adapter with an extra coarse porosity fritted disc between the serrated hose connection and the standard taper inner joint. The disc prevents solids from being introduced into the reaction system during liquid transfer.
-
Synthware Inlet Adapters
Kemtech AmericaSynthware inlet adapter with a standard taper inner joint. Design allows introduction of reactants below the surface. The serrated hose connections have an O.D. of 10 mm.