Thermometer Adapter

PYREX® thermometer adapters have a Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder.

Synthware thermometer adapter with a 5 degree offset and a serrated hose connection for vacuum. Joints are standard taper.

…top of body threaded to take thermometer adapter or vacuum adapter. Thermometer adapter has threaded cap with port to take thermometer, glass tubing or similar objects, up to 6 mm o.d. Viton® O-rings seal against thermometer and against mouth of body. Vacuum adapter has serrated Teflon tubing…

Thermometer adapter with PTFE body and Viton® O-ring for air tight vacuum work. Features Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items Rotating the extracting…

Thermometer Adapter, Vacuum, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.

Inner joint at bottom and 10/30 outer joint at top which is offset and angled for use in multiple neck flasks.

Adapter, standard taper joint, 13mm OD center tube with bead,6mm OD tube end side arm.

These PTFE inner joint adapters have a threaded compression cap, four saddle O-rings and one Viton® O-ring for use with plain stem thermometers and inlet tubes. Accepts thermometers with O.D.'s from 3 to 7mm.

Ai Thermometer Inlet Adapter with Sealing Gasket.

Standard Taper joint at the bottom and a tubulature at the top Includes a rubber adapter with a ¼" hole in the top for use with plain stem thermometers, gas inlet tubes, etc. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

Made of PTFE with Nylon knurled nut to adapt standard chemical thermometers. For use in 10/18 or 10/30 joints. Simple to use: insert thermometer to desired depth, tighten nut.

PTFE adapter with FETFE O-Ring for use with plain stem thermometers, gas inlet tubes, etc. O-Ring compression seal allows adjustable depth positioning. 10/18 size will accommodate tubes up to 6.5mm, all other sizes up to 7mm. All sizes have one internal O-ring size -108. Except for 10/18 size, all…

Adapter has a 10/30 outer joint at the top for use with CG-3506 thermometers. When used with vertical side neck flasks, thermometers can be angled into the bottom of the flask. FOR THERMOMETERS SEE CG-3506-N.

Adapter has a tubulation at the top for use with a CG-1040 rubber fitting. Fitting permits insertion of plain stem thermometers or bleed tubes. Supplied complete with one CG-1040 rubber fitting.

Adapter has a #7 or #15 Chem-Thread at the top for vacuum tight seal of plain stem thermo-meters or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon® compression cap and Viton o-ring.

Thermometer Adapter, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.

Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm. When used with vertical side neck flasks, thermometers or bleed tubes can be angled into the bottom of the flask. Supplied complete with a compression cap and…

Made entirely of PTFE, adapter has an inner joint of the listed size. The compression nut allows for vertical adjustment of thermometers or bleed tubes having an O.D. between 6 and 7mm. Supplied complete with one #108 Viton o-ring.

With standard taper 10/30 thermometer joint for 76 mm immersion.

Adapter has a Nylon compression cap and a Viton o-ring to form a vacumm tight seal. Cap accommodates 5.0 - 7.5mm O.D. thermometer or gas inlet tube. To use it as a syringe port, simply replace the o-ring with a PTFE-lined septum. Supplied with one Nylon cap and one Viton o-ring.

General Description Threaded nylon bushing with FETFE® O-ring. Legal Information Ace-Thred is a trademark of Ace Glass, Inc.; FETFE is a registered trademark of Ace Glass, Inc.

Synthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size. 

Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3

…excellent heat transfer and does not interfere with magnetic field Thermowell is provided for insertion of a contact thermometer or PT100 sensorOptiChem® Heater Block adapter is designed to fit all hot plate stirrers with a 135mm diameter top plate. Lower edge of block covers side of top…

This precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…

Made from PTFE with Viton® O-ring on the body, screw cap and hose connection. Threads into Adapt-A-Port® body for use in standard taper glassware. NOT autoclavable. Accepts thermometer or straight glass tubing. Includes side mounted vacuum port

…Contact Thermometer •Electronic contact thermometer with 3 operating modes •With optimized PID control •RESET function •Incl. stainless steel sensor H 62 •For all magnetic stirrers with contact thermometer bushing according to DIN 12878, class 2 e.g. IKA, Heidolph and Corning with adapter AD-C1…

For use with plain thermometers, pipets, syringes or other small items with an OD from 2 to 17 mm. A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers Cap is suitable for use to 150 °C To use it as a septum…

For use with plain thermometers, pipets, syringes or other small items with an OD from 2 to 17 mm. A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers Cap is suitable for use to 150 °C To use it as a septum…

For use with plain thermometers, pipets, syringes or other small items with an OD from 2 to 17 mm. A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers Cap is suitable for use to 150 °C To use it as a septum…

Pear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.