Ace Glass Lab Glassware
Benchmark BenchPress 2024 - Promos & Lab Favorites
Shakers, Incubators, Centrifuges, Balances, Rotators,
Vortexers, Dry Baths, Rockers and MORE!
Download the promotional brochure below learn more.
Benchmark BenchPress 2024 Promotional Brochure
Offers expire July 31, 2024
-
Similar to our larger units but is designed for carrying out reactions on a small scale, volumes of 5-15mL. Reactor body is fabricated of borosilicate glass with #25 Ace-Thred at top, 14/10 outer side joint externally threaded to allow an O-RING-CAP-SEAL connection with mating inner joint, and…
-
Borosilicate glass transition adapter to convert beaded pipe 2 to standard taper joint.
-
Epoxy Adhesive
Ace GlassA two-component system; cures to a film highly resistant to chemicals which tightly bonds the PTFE sleeve to glass. If sleeve is damaged, the epoxy may be removed with boiling formic acid and a new sleeve may be attached. Supplied in 30mL jars with activator in separate container. 30mL will cement…
-
Distilling Apparatus
Ace GlassA compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. The indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. By use of the three-way stopcock, a manifold arrangement is achieved, making it…
-
Bearing, Trubore, Water-Cooled, 10mm
Ace GlassInterchangeable, ground joint bearing with jacket for water cooling. May be operated as high as 2000 rpm using our 8119 high-speed lubricant. Can be operated at 1500 rpm unevacuated using our 8117 Stir-Lube. Hose connections for use with 5/16" or 3/8"ID tubing. Available with PTFE clad joint to…
-
Distilling Head, Hennion Design
Ace GlassFor variable reflux ratio, can be used for operation under vacuum and receiver can be removed without disturbing the system's vacuum. 10/30 thermometer joint takes 76mm immersion thermometer listed under 8315. Side arm joint is 24/40. Stopcock bores are 2 mm.
-
Interchangeable ground joint bearing with top lubricant well for use with our precision ground stirring shafts (8068,8070,8071,8073, 9532,9533). Recommended top stirring speed with our 8117 Stir-Lube is 1500 rpm.
-
Vessel only, enables cooling of reactant material during photolysis plus the added feature of a 2mm bore, 1:5 PTFE stopcock at bottom for draining contents of vessel. Made of borosilicate glass to accommodate the immersion well. With one 14/20 angled joint for sparger tube, one 24/40 vertical joint…
-
Ace Plastic Coating
Ace GlassThis easy-to-apply plastic coating forms a protective film around the outside of a glass component. It will normally contain both the glass particles and the materials inside the vessel should the glass vessel break during an experiment. This is a hard, adherent film and is resistant to leaching…
-
Distillation Head, Vacuum Type
Ace GlassVacuum distillation head featuring glass or PTFE stopcock plugs which allow the receiver to be removed from the head without disturbing the refluxing solvent. All joints are 24/40 with the exception of a 10/18 thermometer joint which will accept our 5028-24 adapter and 6.4mm thermometers such as…
-
Photochem Reactor, Ace-Thred, Plain
Ace GlassGlass, unjacketed reaction vessel design for use with our 7874 quartz and 7875 glass immersion wells. Instead of a standard taper joint, this reactor utilizes a height-adjustable, non-freezing #50 Ace-Thred. Also featured, a 14/20 angled joint for a sparger tube, a 24/40 vertical joint for a…
-
Distilling Column, Vigreux
Ace GlassWith standard taper 24/40 joints. Length in centimeters refers to the effective length of the column as measured from the lowest to the highest indent of the column.
-
Cylindrical vessel with a 2mm bore PTFE stopcock at top, GPI threaded angled side port, & #15 Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc & a PTFE shut-off valve. PTFE adapter has front type seal using a CAPFE O-Ring to make a compression seal in the #15…
-
Adapter Connecting, NO-AIR
Ace GlassY shaped, 3-way adpater. One outer joint, two inner standard taper joints. Great for adapting flasks and other Schlenk line components. All three joints are the same size.
-
Straight sparger tube with Ace fritted bottom available in various porosities. Top is either a 1/2"ID hose connection or a #7 Ace-Thred which allows the use of our 5853-06 Ace-Safe connector. The 10MM OD spargers will fit inside #11 Ace-Threds, the 14M
-
Dilatometer, Volumetric
Ace GlassFor use in any reaction where there is a change in volume. Described in Experiments in Physical Chemistry, Shoemaker & Garland, 1962, by McGraw-Hill Book Company, Inc. Experiment 27. Capacity of bath is 75mL, bulb 50mL, with capillary tube graduated from 0.0cm at bottom to 15.0cm at top. I.D.…
-
Adapter, 75 degree Angle
Ace GlassWith standard taper inner joints at bottom and side, outlet tube at top.
-
Solvent Collector and Dispenser
Ace GlassUsed for collection and long-term storage of solvents. With standard taper 14/20 outer joint and 2 mm bore PTFE stopcock at top, double oblique 2 mm bore PTFE stopcock and standard taper 14/35 joint at bottom. Capacity is 250mL.
-
Adapter, PTFE Pour Spout
Ace GlassPTFE threaded pour spout with fetfe o-ring prevents material contact with the threads.
-
Beaded Process Pipe
Ace GlassAll pipe is available from stock in lengths shown; special lengths available at slightly higher cost.
-
Joints, Outer Member, Straight-Sided
Ace GlassO.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.
-
-
Thermowell, Pressure Reactor
Ace GlassPressure reactor thermowell has a shoulder that rides against bottom of a bushing to prevent blowout. Inner diameter of well is approximately 5mm and is available in many lengths. Order thermowell and bushing separately.
-
This bushing adapter has a male Ace-Thred connection at bottom and a female NPT thread drilled into the center of the top of the bushing. The top FNPT connection matches male Swagelok fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is…
-
Freeze Drying Apparatus, Greaseless
Ace GlassEconomical umbrella design freeze drying apparatus utilizing Ace-Threds for positive, grease-free connections that are easy to manipulate. A variety of vessels and adapters available and are readily adapted to mechanical units.
-
Adapter, 75 degree Angle, #7 Ace-Thred
Ace GlassWith standard taper inner joint at bottom and side. Top has #7 Ace-Thred for use with 5029 Nylon bushing and adjustable length thermometer. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.
-
Flange, Heavy Wall, Glassblower parts
Ace GlassHeavy walled flange for large scale rotary evaporator condensers.
-
Glass, jacketed reaction vessel design for use with our 7874 quartz and 7875 glass immersion wells. Instead of a standard taper joint, this reactor utilizes a height-adjustable, non-freezing #50 Ace-Thred. Also featured, a 14/20 angled joint for a sparger tube, a 24/40 vertical joint for a…
-
Filter Reactor, Plain
Ace GlassComplete filter reactor assembly allows single or multi-step reactions and filtrations in the same vessel. Features heavy wall glass, interchangeable filters, mechanical agitation and 4" or 6" Duran flanges. Available capacities from 150ml to 6000ml. P
-
Adapter, Twin, Ace-Thred
Ace GlassTwin adapter features two Ace-Thred top openings and a standard taper inner joint bottom. With the supplied nylon bushings, two tubes or a thermometer and bleed tube can be inserted through the same joint. The 24/25 medium length joint is compatible wi
-
Joints, Spherical, Heavy Wall
Ace GlassFull length, heavy wall. U.S. Reissue Patent No. 22181. These famous ACE spherical joints are precision ground and vacuum leak-tested for fit and interchangeability. Available in both ball and socket members.
-
Joints, Stainless Steel
Ace GlassInterchangeable, full length. These joints are machined from 18-8 type 303 free machining Stainless Steel and are supplied in accordance with CS21-58 of the N.I.S.T., O.D. and I.D. dimensions approximately the same as the glass joints listed under 7565. Shanks are machined for thread size listed…