Glass, Ace Glass, Supplies
-
Still, Solvent Recovery
Ace GlassWhen attached to the top of Snyder Column, unit is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations. PTFE stopcock (1:5, 2mm bore) provides option for total reflux or takeoff. #7 Ace-Thred on side arm accepts tubing 6 - 7mm O.D. 5029-10 Nylon bushing and…
-
Distilling Receiver, Vacuum Type
Ace GlassWith standard taper inner joint at bottom and outer joint at top. Graduated to 125mL in 1mL subdivisions.
-
Pressure Vessels, Tubes & Bottles
Ace GlassAce Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breaking…
-
Clamps, Spherical joint, Union type
Ace GlassU.S. patent #2,388,633 fabricated from aluminum. This type clamp affords a positive, uniform clamping pressure.
-
Distilling Receiver, Vacuum Type
Ace GlassWith standard taper joint at top. Capacity 100mL, in 1mL subdivisions.
-
Reaction Flask Head
Ace GlassConical 4" neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints. Use 6496 Clamp for securing to flasks.
-
Tube, Craig Recrystallization
Ace GlassMicroscale Craig tube for recrystallizing small quantities of reaction product. Craig tube recrystallization consists of a glass outer tube with non-uniform grind to purposely allow leakage, and a PTFE inner plug*. This plug eliminates breakage normally experienced with glass plugs. Volume stated…
-
Joints, Outer Member, Straight-Sided
Ace GlassO.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.
-
Adapter, Claisen, Threaded
Ace GlassMicroscale Claisen adapter/head often used to facilitate syringe addition of reagents to sealed or moisture-sensitive systems. With inner joint at bottom and two outer joints externally threaded for an O-RING-CAP-SEAL connection with mating male joints. Supplied with two threaded caps with hole,…
-
Funnel, Pressure Filter/Drying, Rusek
Ace GlassUsed for drying air-sensitive compounds with inert gas or a simple pressure filter funnel. O-Ring joint connects cap to body to give a larger opening. Funnel will withstand pressures of 20psi as supplied but NO warranty, expressed or implied. Cap adapt
-
Circulator Adapters, Universal
Ace GlassAce Glass universal pilot plant / circulator adapters and fittings designed for use with various manufacturer's circulators and our reaction systems.
-
Distilling Column, Vigreux
Ace GlassWith standard taper 24/40 joints. Length in centimeters refers to the effective length of the column as measured from the lowest to the highest indent of the column.
-
Gas Reservoir
Ace GlassGas collecting reservoir, described in Microscale Organic Laboratory, Mayo, Pike, Butcher, as a means of collecting and sampling gaseous products when using 9586 Capillary Gas Delivery Tube. Open-bottom tube has single line graduation at 3 and 4mL level and 20-400 thread at top. Supplied with cap…
-
Distilling Receiver
Ace GlassAn excellent all-purpose receiver for general distillation work. Equipped with a complete stopcock manifold to allow contents of the receiver to be removed to a single receiving flask without disturbing the vacuum of the system. Stopcocks are 4 mm bore.Tubing connections are 10mm O.D. olive type.
-
Adapter, Bent 105 degrees
Ace GlassWith standard taper joints, one 14/20 outer and one 14/35 inner or one 24/25 outer and one 24/40 inner.
-
Standard taper, outer member, medium length, straight-sided joint.
-
Distilling Head
Ace GlassWith finger type condenser and 0-3 mm PTFE stopcock plug with PTFE ring seals for reflux control. The seals prevent O-Ring exposure to corrosive liquids and are backed up by a FETFE O-Ring. Thermometer joint is 10/30, all others are 14/20.
-
Ace-Threds and Ace-Thred and joints
Ace GlassWith Ace-Threds or Ace-Thred and joints. Accepts a single 5mm or 10mm O.D. NMR Tube. Solvent reservoir capacity is 55mL. All threaded versions have a filter flask with a #15 Ace-Thred at top and O-Ring and #11 Ace-Thred side port with a removable Ace-Safe hose connection. Threaded-jointed version…
-
Sparger, Easy action stopcock
Ace GlassSparger tube with Ace fritted bottom available in various porosities. Top has either 0-3 or 0-5 Easy Action Stopcock. The 90 degree side arm is available with a glass hose connection or a #7 Ace-Thred which promotes the use of our 5853-06 Ace-Safe conn
-
Adapter, Distilling
Ace GlassFor connecting distilling column with vertical condensers. Top joint 10/30 is for 76 mm immersion thermometer. Side arm at 75 degree , vertical side arm 17.8cm from center tube.
-
Thermometer Well, with Joint
Ace GlassFor reaction flasks, can be used with either cylindrical or spherical type. With 14/35 joint. Length measurement (A) is distance below joint to bottom of tube.
-
Manifold, Pressure, Epoxy Coated
Ace GlassPressure manifold provides for safer operation of Ace pressure filter reactors. Manifold features an epoxy coating, 0-60psi pressure gauge with stainless steel internals, 0-50psi adjustable relief valve and over-pressure safety rupture disc. Ace-Thred
-
Adapter, Gas Inlet
Ace GlassWith 24/40 standard taper inner and outer joints and side hose connection size D.
-
Distillation Apparatus, Short Path
Ace GlassDesigned for small quantities where holdup between flask and receiver must be minimized but where it is also desired to measure vapor temperature with an accuracy compared to large setups. Improved thermometer sensitivity. Physical carry-over is practi
-
Cylindrical vessels with #15 Ace-Thred at both ends, no side port. Use 5838-91 PTFE Adapter with removable filter disc and 5839-04 PTFE Valve with luer extension at either end, see 6404 for listings.
-
Coupling, Reducing, Nylon or PTFE
Ace GlassNylon or PTFE reducing coupling for threaded columns or fittings. Single o-ring seal for leak tight engagement with hand pressure.
-
Adapter, Thermocouple Probe, Kilo Scale
Ace GlassAnti-whip, glass adapter for protecting 1/4in OD probes within kilo scale reactors. Complete unit consists of a heavy, glass sheath topped with a 45/50 standard taper joint with a #25 Ace-Thred, one #25 nylon bushing with a #7 Ace-Thred tap and one #7
-
Reaction Flask Head, Conical Flange
Ace GlassConical 4" (10.2cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a 10/30 joint for a ground joint thermometer. Use 6496 Clamp for securing to f
-
-
Splitter Distillation, Reflux
Ace GlassReflux distillation splitter adapter for all sizes of reactors. Standard taper inner joint bottom and reinforced outer joint top. Straight path splitter intended for use with 90 degree vertical joints. 0-10mm side valve with precision ground swagelok v
-
Distilling Column, Perforated, Hempel
Ace GlassWith standard taper joints and perforated glass disc for packing support. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.
-