Features: Available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both…

TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

Large furnace TGA/DSC that’s well suited for samples up to 900µL with a temperature range up to 1100°C. Includes a 6 place microgram balance. Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler…

Heating elements on support tubes radiating freely into the furnace chamber provide for particularly short heating times for these models. Thanks to their robust lightweight refractory brick insulation, they can reach a maximum working temperature of 1300 °C. These models thus represent an…

We particularly recommend the L 9/11/SKM model if your application involves aggressive substances. The furnace has a ceramic muffle with embedded heating from four sides. The furnace thus combines a very good temperature uniformity with excellent protection of the heating elements from aggressive…

These powerful laboratory muffle furnaces are available for temperatures up to 1400°C, 1500°C, or 1600°C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to…

Ramsbottom PYREX® For determination of carbon residue left on evaporating oil Meets ASTM D 524

High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases…

Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ Largest Tabletop Muffle Furnace. Designed for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass,…

Accessory for model F48000 Thermolyne benchtop muffle furnace. Dimensions (L x W x H) Exterior 10 x 7.6 x 0.38 in. (25.4 x 19.3 x 0.95cm) Dimensions (L x W x H) Exterior 10 x 7.6 x 0.38 in. (25.4 x 19.3 x 0.95cm) - See more at: http://www.thermoscientific.com/en/product/benchtop-muffle-furnaces-accessories.html#sthash.DQyZgrMn.dpuf

To withstand harsh use in the laboratory, e.g. when heat-treating metals, robust insulation with light refractory bricks is necessary. The chamber furnaces N 7/H - N 87/H are a perfect fit to solve this problem. The furnaces can be extended with a variety of accessories, like annealing boxes for…

Small furnace TGA that’s well suited for samples up to 100µL with a temperature range up to 1100°C. Includes a 6 place microgram balance. Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler distributor…

GCF1200 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and the famous Kanthal (Sweden) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by…

The muffle furnaces L 1/12 - LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Tmax 1100°C or 1200°C Heating from two sides by ceramic heating plates…

High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases…

The FO series represents the standard type of muffle furnaces which uses a microprocessor controlled thermoregulator and is capable of heat processing characterized by excellent repeatability. Due to high adiabatic characteristic, temperature rises in a very short time Space-saving and…

For added protection, the door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition Two open coil heating elements on chamber sides assure fast heat-up with minimum…

Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ Largest Tabletop Muffle Furnace. Desiged for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass,…

1200°C maximum temperature 120 or 350 cu. in. capacities Built-in vent port Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature…

High performance muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility.  Excellent heat tightness with a firmly sealed chamber…

CF1700 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

Ai TFM3 series 1600°C 3-zone tube furnaces use SiC and MoSi2 as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan) with +/-1°C…

GCF1400 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment…

Moldatherm® ceramic fiber insulation with embedded heating elements provides fast heat-up and recovery Setpoint and actual temperatures are displayed simultaneously on controller Heat-reflecting inner shell creates two insulating air spaces Fast, reliable, cost-effective answer for those…

Use Thermo Scientific™ Thermolyne Premium Large Muffle Furnace Accessories to increase the utility of the Large Muffle Furnace.

Achieve consistent temperature control with the Thermo Scientific™ Thermolyne™ Atmosphere Controlled Ashing Furnace, which reaches 975°C with the standard stainless-steel manifold and 1093°C with the optional inconel manifold.  Key Features: Adjustable gas…

TF1800 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace…

GCF1700 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

Select between different bottom plates and collecting pans for protection of the furnace and easy loading (for models L, LT, LE, LV and LVT). Heat-resistant gloves for protection of the operator when loading or removing hot materials, resistant to 650°C or 700°C. Various tongs for easy…

These compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not…