Fume Hoods, Enclosures, and Biosafety Cabinets, Labconco, Supplies
-
5' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Purifier Vertical Clean Benches
LabconcoPurifier Vertical Clean Bench, provides ISO Class 5 conditions appropriate for applications such as plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Features include aerodynamic air foil, UV-resistant, glacier white and…
-
RXPert Single Filtered Balance Systems are Class I biological safety cabinets that meet the USP <800>† requirements for non-sterile hazardous compounding. They provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods…
-
Caster Kit for Base Stands, adds mobility to Hydraulic Lift Base Stands. Kit includes four 5" diameter, non-marking polyurethane casters with toe locks. Casters will replace fixed feet included with the stand.
-
Canopy Connection Kit
LabconcoFor use with Labconco XPert Systems and Purifier Class I and HEPA Filtered Enclosures. Allow the enclosure to be thimble-ducted to the outside for additional protection. The canopy's air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the…
-
Fiberglass Blowers
LabconcoFiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres. …
-
Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)
-
Includes three stainless steel mounting hooks and three carabiners Hooks mount to the rear grille Carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area Shipping weight 3 lbs. (1 kg)
-
The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in…
-
-
-
Class II Cabinets IV Bar Kits
LabconcoIV Bar Kit for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Kit includes: IV bar, mounting hardware, four hangers and instructions for installation
-
8' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
For use with Purifier Logic Biosafety Cabinets & PuriCare Procedure Stations Service Fixture Kit, includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior.
-
Ultraviolet Lamp Kits
LabconcoUltraviolet Lamp Kit, for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Includes 254 nm UV lamp, installation instructions and a ballast Available for all 100 V, 115 V 60 Hz and 230 V models
-
Basic 47 & Basic 70 Fume Hoods
LabconcoIdeal for rooms with ceilings under eight feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece…
-
Coated Steel Blowers
LabconcoPhenolic-coated impeller and housing Dry powder epoxy-coated steel base and removable weather cover Belt-drive motor with adjustable sheave and self-adjusting gravity belt tightener
-
PVC Blowers
LabconcoPVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid…
-
Back Draft Damper
LabconcoMounts in vertical duct run to prevent reverse pressurization of the exhaust system 3.0" (8 cm) high with 10" (25.4 cm) diameter OD inlet and outlet Shipping weight 5 lbs. (2 kg)
-
Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.
-
The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
Purifier Horizontal Clean Bench
Labconco99.99% efficient HEPA filter Prefilter Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) Minihelic II pressure gauge Double-gasket, negative pressure HEPA filter leak protection Front-mounted light and blower switches Variable speed motor/blower(s) with vibration isolation pads …
-
Logic Vue Class II Enclosures
LabconcoThe Logic Vue is a specialized Class II enclosure designed to maximize protection and containment for large instruments such as liquid handlers, flow cytometers, and other pieces of automated equipment. The Logic Vue provides laminar, unidirectional ISO 5 air for product protection and meets or…
-
LED, Direct Wired T8 x 3' – newest models use on 4' & 8' Hoods – 12 watts each
-
The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
3' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
-
Purifier Horizontal Clean Bench
LabconcoPurifier Horizontal Clean Bench, provides Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) for work with materials that do not generate harmful aerosols or vapors, yet require a particulate-free environment. Exclusive features: double-gasket; negative pressure HEPA filter leak…
-
Vibration Isolation Table, provides an isolated work surface for conducting procedures with vibration-sensitive equipment such as microscopes and balances. The table never makes contact with the clean bench so vibration from the motor/blower is not transmitted to the table. Epoxy-coated steel…
-
Base Stand Accessory Shelves
LabconcoGlacier white, epoxy-coated, 16 gauge steel Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies
-
Securely support a laptop computer within easy view of an operator seated at the Purifier Logic Biosafety Cabinet or PuriCare Procedure Station. Mount to front of SoLo Base Stands or front leg of Telescoping Base Stands. Articulating arm raises, lowers and pivots to a steady position. Include…
-
8' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.