• PRODUCT AVAILABILITY: Did you know you can view a product's availability right on the product page? Simply enter the quantity you want to purchase and the current availability will appear below the item.

Labconco

RXPert™ Single Filtered Balance Systems

Not yet rated

Equipment Financing Available

Thomas Scientific has partnered with Northstar Leasing, who has been enabling companies to obtain the equipment they need today, to succeed tomorrow!
North Star Leasing offers a wide range of financing programs to meet unique business needs.
Take a look at our Equipment Financing Service to learn more or get started today!

**Equipment Financing is open to US and Canada based customers only.

RXPert Single Filtered Balance Systems are Class I biological safety cabinets that meet the USP <800>† requirements for non-sterile hazardous compounding. They provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods include a canopy and damper for thimble ducting the enclosure to the outside.

All models feature:

  • Patented* design
  • Deep interior of 23.4" or 30.0" depending on the model
  • Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
  • Upper dilution air supply
  • Upper containment sash foil
  • Zone-perforated, pivoting rear baffle
  • Side-entry air foils
  • Two exhaust HEPA filters, 99.99% efficient on particles 0.3 micron in size
  • Each HEPA filter 100% independently leak-detection scannable without removing impellers or filters
  • True bag-in/bag-out filter disposal system (requires certified technician)
  • Built-in blower with dynamically balanced, vibration-isolated motorized impeller and speed control. Blower has a 40% reserve so that the speed may be adjusted as needed by a certified technician as the filter loads.
  • Guardian Airflow Monitor that continuously monitors airflow with a green LED that glows when airflow is within set point range and a red LED that glows and an audible alarm that sounds when airflow is outside set point range.
  • Pressure gauge
  • Intrinsically safe, negative pressure design
  • Quiet operation
  • Glacier white and gray, powder-coated aluminum frame and steel rear plenum and baffle. No unreliable plastic-to-plastic bonding is used.
  • Pre-wired fluorescent lamp and switches for blower and light
  • 1/4" thick tempered safety glass front sash and sides
  • Ergonomic angled and hinged, pivoting sash with wiping seal. Sashes on taller 4', 5' and 6' models incorporate an external gas-assist lift.
  • Models with 9.4" sash opening height have 16.5" locking height and 19.0" maximum loading height. Models with 12.0" sash opening height have 25.75" locking height and 28.25" maximum loading height.
  • Two (1.5") utility ports for pass-through of electrical cords
  • 7' cord included
  • Particulate containment independently verified by SafeBridge Consultants, Inc.
  • Validation package available containing balance stability, powder containment and modified ASHRAE 110-1995 Test Reports

†U.S. Pharmacopeial Convention proposed standard. Publication pending.
*U.S. Design Patent D538,941

Please Enter Your Order Info

Filter by:

  • Clear Filters
Product Detail
Thomas No.
1191K15
Mfr. No.
3971200
Description
2' RXPert System with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K16
Mfr. No.
3971201
Description
2' RXPert System with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K17
Mfr. No.
3971202
Description
2' RXPert System with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K18
Mfr. No.
3971300
Description
3' RXPert System with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K19
Mfr. No.
3971301
Description
3' RXPert System with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K20
Mfr. No.
3971302
Description
3' RXPert System with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K21
Mfr. No.
3971400
Description
4' RXPert System with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K22
Mfr. No.
3971401
Description
4' RXPert System with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1191K23
Mfr. No.
3971402
Description
4' RXPert System with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H10
Mfr. No.
3971475
Description
4' RXPert System, Tall, with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H11
Mfr. No.
3971476
Description
4' RXPert System, Tall, with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H12
Mfr. No.
3971477
Description
4' RXPert System, Tall, with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H13
Mfr. No.
3971495
Description
4' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H14
Mfr. No.
3971496
Description
4' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H15
Mfr. No.
3971497
Description
4' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H16
Mfr. No.
3971575
Description
5' RXPert System, Tall, with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H17
Mfr. No.
3971576
Description
5' RXPert System, Tall, with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H18
Mfr. No.
3971577
Description
5' RXPert System, Tall, with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H19
Mfr. No.
3971595
Description
5' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H20
Mfr. No.
3971596
Description
5' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H21
Mfr. No.
3971597
Description
5' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H22
Mfr. No.
3971675
Description
6' RXPert System, Tall, with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H23
Mfr. No.
3971676
Description
6' RXPert System, Tall, with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H24
Mfr. No.
3971677
Description
6' RXPert System, Tall, with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H25
Mfr. No.
3971695
Description
6' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper & Airflow Monitor, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H26
Mfr. No.
3971696
Description
6' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper, Airflow Monitor & SST Work Surface, 115V
list price/quantitytotal
$0.00
Thomas No.
1184H27
Mfr. No.
3971697
Description
6' RXPert System, Tall and Deep, with Factory-Installed Canopy, Damper, Airflow Monitor & Epoxy Work Surface, 115V
list price/quantitytotal
$0.00
$0.00 (0 Items)

Write A Review