Fume Hoods, Enclosures, and Biosafety Cabinets, Labconco
-
5' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Basic 47 & Basic 70 Fume Hoods
LabconcoIdeal for rooms with ceilings under eight feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece…
-
Fiberglass Blowers
LabconcoFiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres. …
-
HEPA Filter
LabconcoApplicable Categories: Purifier Class I & HEPA Filtered Enclosures, PuriCare Bedding Disposal Stations, XPert & RXPert Balance & XPert Bulk Powder Enclosures Applicable Products: PuriCare Bedding Disposal Stations, Purifier Class I Enclosures, Purifier HEPA Filtered Enclosures,…
-
3' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
4' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Includes three stainless steel mounting hooks and three carabiners Hooks mount to the rear grille Carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area Shipping weight 3 lbs. (1 kg)
-
Air-Tight Damper
LabconcoMounts atop the Canopy Connection to adjust exhaust airflow and closes for decontamination procedures Manually adjustable, type 304 stainless steel 10"(25.4 cm) high with 10"(25.4 cm) diameter OD inlet and outlet Shipping weight 13 lbs. (6 kg)
-
6' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.
-
4' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
RXPert Double Filtered Balance Systems meet the USP <800>† requirements for non-sterile hazardous compounding. These Class I biological safety cabinets use double HEPA filtration to contain airborne particulates and powders, providing user protection during hazardous drug manipulation.…
-
Support Shelves
LabconcoProvide 8.0" x 20.0" (20 x 51 cm) work surface to support remote equipment within easy access of the biosafety cabinet Epoxy-coated steel shelf mounts to left-side tubular frame of base stand Includes epoxy-coated steel shelf and fasteners. Installation is required Not for use…
-
Logic Vue Safety Interlock Cable
LabconcoSafety Interlock Cable provides interface between the Logic Vue and automation devices that employ a safety interlock. Opening the sash of the Vue triggers the interlock, immediately signaling a device to pause or stop.
-
The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
Canopy Connection Kit
LabconcoFor use with Labconco XPert Systems and Purifier Class I and HEPA Filtered Enclosures. Allow the enclosure to be thimble-ducted to the outside for additional protection. The canopy's air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the…
-
5' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
Purifier Vertical Clean Benches
LabconcoPurifier Vertical Clean Bench, provides ISO Class 5 conditions appropriate for applications such as plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Features include aerodynamic air foil, UV-resistant, glacier white and…
-
Service Fixture Kit, includes serrated hose tip valve with quarter turn control handle, hardware and instructions for plumbing to services. Up to two fixtures may be mounted on the right hand side of the Purifier Horizontal Clean Bench.
-
PVC Blowers
LabconcoPVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid…
-
3' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Coated Steel Blowers
LabconcoPhenolic-coated impeller and housing Dry powder epoxy-coated steel base and removable weather cover Belt-drive motor with adjustable sheave and self-adjusting gravity belt tightener
-
Class II Cabinets IV Bar Kits
LabconcoIV Bar Kit for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Kit includes: IV bar, mounting hardware, four hangers and instructions for installation
-
Ultraviolet Lamp Kits
LabconcoUltraviolet Lamp Kit, for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Includes 254 nm UV lamp, installation instructions and a ballast Available for all 100 V, 115 V 60 Hz and 230 V models
-
Caster Kit for Base Stands, adds mobility to Hydraulic Lift Base Stands. Kit includes four 5" diameter, non-marking polyurethane casters with toe locks. Casters will replace fixed feet included with the stand.
-
-
Seismic Support Bracket Kit
LabconcoIncludes four stainless steel seismic brackets and hardware for attachment to the stand Hardware to attach to the floor and installation are required Shipping weight 10 lbs. (4.5 kg)
-
For use with Purifier Logic Biosafety Cabinets & PuriCare Procedure Stations Service Fixture Kit, includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior.
-
8' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
8' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.