Hoods, Laminar Flow, Fume Hoods, Enclosures, and Biosafety Cabinets, NEW! Life Science, Labconco
-
3' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Logic Vue Class II Enclosures
LabconcoThe Logic Vue is a specialized Class II enclosure designed to maximize protection and containment for large instruments such as liquid handlers, flow cytometers, and other pieces of automated equipment. The Logic Vue provides laminar, unidirectional ISO 5 air for product protection and meets or…
-
Includes three stainless steel mounting hooks and three carabiners Hooks mount to the rear grille Carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area Shipping weight 3 lbs. (1 kg)
-
6' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Canopy Hoods
LabconcoDesigned to vent non-toxic materials such as heat, steam and odors from large or bulky apparatus such as ovens, steam baths and autoclaves, wall-mounted or suspended from the ceiling, built-in baffle to increase air velocities and enhance its overall capture efficiency, glacier white epoxy-coated…
-
-
Support Shelves
LabconcoProvide 8.0" x 20.0" (20 x 51 cm) work surface to support remote equipment within easy access of the biosafety cabinet Epoxy-coated steel shelf mounts to left-side tubular frame of base stand Includes epoxy-coated steel shelf and fasteners. Installation is required Not for use…
-
Purifier Vertical Clean Benches
LabconcoPurifier Vertical Clean Bench, provides ISO Class 5 conditions appropriate for applications such as plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Features include aerodynamic air foil, UV-resistant, glacier white and…
-
RXPert Single Filtered Balance Systems are Class I biological safety cabinets that meet the USP <800>† requirements for non-sterile hazardous compounding. They provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods…
-
Fiberglass Blowers
LabconcoFiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres. …
-
4' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
IV Bar Kit, supports intravenous solution bottles and bags. Kit includes IV Bar, mounting hardware, four hangers and instructions for installation. 3' and 4' Purifier Horizontal Clean Benches accommodate one IV Bar. 6' benches accommodate two.
-
The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
Vibration Isolation Table, provides an isolated work surface for conducting procedures with vibration-sensitive equipment such as microscopes and balances. The table never makes contact with the clean bench so vibration from the motor/blower is not transmitted to the table. Epoxy-coated steel…
-
PVC Blowers
LabconcoPVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid…
-
-
Ultraviolet Lamp Kits
LabconcoUltraviolet Lamp Kit, for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Includes 254 nm UV lamp, installation instructions and a ballast Available for all 100 V, 115 V 60 Hz and 230 V models
-
Back Draft Damper
LabconcoMounts in vertical duct run to prevent reverse pressurization of the exhaust system 3.0" (8 cm) high with 10" (25.4 cm) diameter OD inlet and outlet Shipping weight 5 lbs. (2 kg)
-
Double HEPA Filtration Kits
LabconcoFor field-installation atop XPert Balance Filtered Systems and XPert Bulk Powder Filtered Systems. Provide a second level of HEPA Filtration to meet United States Pharmacopeia (USP) <800> standard for redundant HEPA Filter in series. Each Kit includes one HEPA Filter, set of bag and straps…
-
“Lazy Susan” holds miscellaneous items and rotates 360° to bring items within easy reach Stainless steel surface and ball bearings 12 in. (30 cm) diameter Autoclavable Shipping weight 5 lbs. (2 kg)
-
-
HEPA Filter
LabconcoApplicable Categories: Purifier Class I & HEPA Filtered Enclosures, PuriCare Bedding Disposal Stations, XPert & RXPert Balance & XPert Bulk Powder Enclosures Applicable Products: PuriCare Bedding Disposal Stations, Purifier Class I Enclosures, Purifier HEPA Filtered Enclosures,…
-
Purifier Horizontal Clean Bench
Labconco99.99% efficient HEPA filter Prefilter Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) Minihelic II pressure gauge Double-gasket, negative pressure HEPA filter leak protection Front-mounted light and blower switches Variable speed motor/blower(s) with vibration isolation pads …
-
Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)
-
5' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.
-
RXPert Double Filtered Balance Systems meet the USP <800>† requirements for non-sterile hazardous compounding. These Class I biological safety cabinets use double HEPA filtration to contain airborne particulates and powders, providing user protection during hazardous drug manipulation.…
-
Base Stand Accessory Shelves
LabconcoGlacier white, epoxy-coated, 16 gauge steel Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies
-
Caster Kit for Base Stands, adds mobility to Hydraulic Lift Base Stands. Kit includes four 5" diameter, non-marking polyurethane casters with toe locks. Casters will replace fixed feet included with the stand.
-
Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…
-
Air-Tight Damper
LabconcoMounts atop the Canopy Connection to adjust exhaust airflow and closes for decontamination procedures Manually adjustable, type 304 stainless steel 10"(25.4 cm) high with 10"(25.4 cm) diameter OD inlet and outlet Shipping weight 13 lbs. (6 kg)
-
Basic 47 & Basic 70 Fume Hoods
LabconcoIdeal for rooms with ceilings under eight feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece…