Ace Glass Lab Flasks
-
-
Distillation Apparatus, Alginates Assay
Ace GlassAlginates assay distillation system similar to the one described in US Pharmacopeia 2006, chapter 311. The system includes a metering valve with flow meter tube set, 250mL flask and mantle, reflux condenser with u-tube and hose connection adapters and a 250mL gas washing bottle. 5/16 in ID Vinyl…
-
Fernbach style culture flask with 38mm long style straight neck to accomodate plastic or stainless steel closures, see Ace 3917 & 3918 product families. Flat bottom, no baffles. Caution! Do not place on direct heat source.
-
Flask, Recovery, Rotary Evaporator
Ace GlassA multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.
-
Flask, Recovery, Rotary Evaporator
Ace GlassA multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43
-
Round bottom, borosilicate flask with two necks and a side port with either a 2mm glass stopcock or a 0-3 Inlet valve. Excellent flask for reactions and NO-AIR or vacuum applications. Side port is available with either a 2mm glass stopcock or a 0-3 Inlet valve with 8mm end for use of a rubber septa.
-
Flask, Rotary Evaporator/Freeze Drying
Ace GlassDual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head
-
Flask, Single Neck, Flat Bottom
Ace GlassFlat bottom flask featuring a single, short neck with a standard taper outer joint.,/p>
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Cell culture shake flask with three bottom edge baffles and three bottom baffles to greatly enhance mixing of cells in suspension and gas transfer to media. Ideal for use with reciprocating baths and shakers. Long style, straight neck accomodates either plastic or stainless steel closures, see Ace…
-
Instatherm, Erlenmeyer Flask
Ace GlassInstatherm coated, erlenmeyer flask delivers rapid heating up to 250°C. Always use with a temperature controller and never run dry.
-
Flask, Round Bottom, Four Neck
Ace GlassRound bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and angled standard taper reinforced outer side neck.…
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Heavy wall cylindrical reaction flask with Duran grooved flange opening. Flask has Zero Dead Space, (ZDS), bottom valve. The valve features no material hang-up in the fully open position. When closed, the valve seats flush with the bottom of the flask. Includes one CAPFE o-ring. See Ace 6517 for…
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
For exhaustive distillation of pesticides and industrial chemicals from water, sediments and tissue, and the simultaneous extraction of the distillate by a small volume of organic solvent. The addition of a bulb condenser in place of the straight tube condenser results in more efficient condensing…
-
Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. This style also has a side thermowell port to facilitate a thermometer or a temperature probe to measure flask temperature without losing the pressure integrity of the vess
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
Flask, Two Necks, Pear-Shaped
Ace GlassPear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.
-
Reaction Flask, Cylindrical
Ace GlassRugged cylindrical flask with neck opening of 4". Uses 6496 Clamp for securing flask head to flask. For use with 6478 heating mantles.
-
47mm Membrane Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy…
-
Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.
-
Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.
-
Flask, Two Neck, Angled Side Neck
Ace GlassTwo neck, one center and one angled side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Equilibration Flask
Ace GlassDesigned by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…
-
Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.
-
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep,…
-
Flask, Round Bottom, Three Neck
Ace GlassWith outer joints with side necks angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Round bottom, three neck flask with angled sides. All joints are standard taper. Available in standard and heavy wall.<