Ace Glass Specialty Flasks
-
Reaction Flask, Cylindrical, Jacketed
Ace GlassCylindrical jackted reaction flask with a 4" (10.2cm), top opening. Jacket inlet/outlets are available with tangentially sealed with 28/15 O-Ring ball joint connections, or with #11 Ace-Threds, for use with 3/8in tubing.
-
Reaction Flask Head, #7 Ace-Thred
Ace GlassHeads with four necks, three inline standard taper joints and one perpendicular #7 Ace-Thred™ thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID…
-
Rugged cylindrical jacketed reaction flask with Duran, flat, ground flange and o-ring groove. Various bottom outlet options are available (see details below). For use with 6517 quick release clamp. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints or with…
-
Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304…
-
Flask, Reaction, Cylindrical
Ace GlassCylindrical, heavy wall reaction flask with extra thick flat, ground flange. Without constriction at top to facilitate introduction/removal of material and allow for ease of cleaning. Available in 1L to 4L capacities, flat bottom and round bottom, with
-
Round bottom, borosilicate glass flask for NO-AIR and vacuum applications. Side arm has outer standard taper joint for adding into schlenk and vacuum lines. 0-4MM Hi-Vac valve gives precise control of inlet/outlet flow.
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Flask, Jacketed, with Polished Joint
Ace GlassJacketed version of standard 9448 Flask. Furnished with polished 45/50 outer joint so that it can be used with 9443-20 or 9446 Heads with PTFE-Clad joint which does not require lubricant and does not freeze under high temperature, vacuum operation.
-
Benchtop Reactor, All-in-one, Jacketed
Ace Glass1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.
-
Flask, Tapered Wall
Ace GlassWalls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flasks supplied with joint on center and two side necks. The four and five neck versions have one or two #7 Ace- Thred necks to accomodate thermometers and elect
-
Flask, Tapered Wall
Ace GlassWalls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flasks supplied with joint on center and two side necks. The four and five neck versions have one or two #7 Ace- Thred necks to accomodate thermometers and elect
-
Cylindrical, heavy wall reaction flask with flat ground flange. Sides are indented for better mixing of ingredients. Uses 6508 or 6510 clamp style. Fits reaction heads see 6512, 6513 & 6515.
-
Coupling, Reaction Flask
Ace GlassKF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…
-
Instatherm Reaction Flask and Head
Ace GlassRugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Flask, Three Necks, Jacketed, Heavy Duty
Ace GlassRound bottom flask with three in-line necks. Fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Jacket inlet/outlets are available with either tangentially sealed 28/15 o-ring ball joints or with #11 Ace-Thred connections
-
Round bottom, indented Morton Type, three neck flask. 500ml and 1L sizes have angled side necks while larger sizes feature vertical necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Equilibration Flask
Ace GlassDesigned by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…
-
Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction…
-
Flask, Reaction, Cylindrical, Plain
Ace GlassRugged cylindrical reaction flask with Duran ground flange with o-ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE (PTFE encapsulated silicone) o-ring. Plain silicone o-rings are also available (see 7855). For reaction heads, see 6528 or 6530. For…
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Adapter Connecting, Side Outlet, NO-AIR
Ace GlassUsed for converting a single neck round bottom flask to air-free or vacuum applications. Outlet can be either 2mm glass stopcock or a 0-3 inlet valve. Upper and lower joint sizes are the same size. Great for adapting flasks and other components for Schlenk lines.
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Flask, Tapered wall, Five Neck, Jacketed
Ace GlassFully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.
-
Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…
-
PTFE Reactor, Body Only
Ace GlassAll PTFE reactor body, component of our 6390 PTFE Filter Reactor product family.
-
Instatherm & reg; round bottom flask designed to operate at up to 360 degrees C. Never run dry or above max voltage ratings. Includes a 9698-20 connecting controller cord.
-
Instatherm Reaction Flask
Ace GlassThis integral heating element eliminates the local super heating com- monly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. The response is raoid and accurate the attention can be directed to contents instead of the pot. supplied with cord. Flask…