Ace Glass Specialty Flasks
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Reaction Flask Head, Four Neck
Ace GlassHead with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps.…
-
Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Rugged spherical reaction flask with Duran style flat flange with O-Ring groove, for use with 6517 Quick Release Clamp. Various valve and bottom fitting configurations available, see individual listings. each flask includes a CAPFE (PTFE encapsulated silicone) O-Ring. Plain silicon O-Rings are also…
-
Flask, Tapered Wall
Ace GlassWalls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flasks supplied with joint on center and two side necks. The four and five neck versions have one or two #7 Ace- Thred necks to accomodate thermometers and elect
-
Round bottom, indented Morton Type, three neck flask. 500ml and 1L sizes have angled side necks while larger sizes feature vertical necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Rugged cylindrical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For…
-
Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.
-
Round bottom, borosilicate glass flask for NO-AIR and vacuum applications. Side arm has outer standard taper joint for adding into schlenk and vacuum lines. 0-4MM Hi-Vac valve gives precise control of inlet/outlet flow.
-
Flask, Reaction, Cylindrical, Plain
Ace GlassRugged cylindrical reaction flask with Duran ground flange with o-ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE (PTFE encapsulated silicone) o-ring. Plain silicone o-rings are also available (see 7855). For reaction heads, see 6528 or 6530. For…
-
Head, Filter Reactor
Ace GlassReactor head, 60mm o-ring groove flange with (3) in-line 24/40 joints. Use with our 6384, 6386 and 6388 reactor bodies.
-
Jacketed, spherical reaction flask with Duran flat flange and o-ring groove, for use with our 6517 Quick Release clamp. Bottom outlet features an Easy-Action plug controlling the 28/15 o-ring ball joint outlet. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints…
-
Instatherm & reg; round bottom flask designed to operate at up to 360 degrees C. Never run dry or above max voltage ratings. Includes a 9698-20 connecting controller cord.
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Flask, Three Necks, Jacketed, Heavy Duty
Ace GlassRound bottom flask with three in-line necks. Fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Jacket inlet/outlets are available with either tangentially sealed 28/15 o-ring ball joints or with #11 Ace-Thred connections
-
With three necks and PTFE plug (5mm bore on 5000mL, 4mm bore on all other sizes) stopcock outlet. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. For stopcock plugs, see 8224. For heating mantle, see 12039
-
Flask, Tapered Wall
Ace GlassWalls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flasks supplied with joint on center and two side necks. The four and five neck versions have one or two #7 Ace- Thred necks to accomodate thermometers and elect
-
-
Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Flask Storage Side Joint
Ace GlassStorage or small reaction flask with standard taper joint on side arm. Can be used in gas applications or vacuum and NO-AIR applications. Available in tube and bulb styles with 0-3 vacuum valve.
-
Coupling, Reaction Flask
Ace GlassKF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…
-
Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction…
-
Round bottom, indented Morton Type, three neck flask. All flasks have angled side necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Similar to 9844-07 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Benchtop Reactor, All-in-one, Jacketed
Ace Glass1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Flask
Ace GlassRound bottom, cylindrical sides. Useful in many Mini-Lab Assemblies. Can also be applied to many other applications in the laboratory where a wide-mouthed flask of small capacity is desired. Available with 45/50 joint polished.
-
Kriel Reactor, Photochemical
Ace GlassReactor is most useful in prep-scale photolysis and features tapered sides which assures full submersion using our 7825-34 or 7825-36 lamps within the supplied quartz immersion well. A 20% savings in reaction time over round bottom flasks. Additionally
-
Reaction Flask, Cylindrical
Ace GlassRugged cylindrical flask with neck opening of 4". Uses 6496 Clamp for securing flask head to flask. For use with 6478 heating mantles.
-
Rugged cylindrical reaction flask Duran, flat, ground flange and O-ring groove, with an Easy Action Plug bottom outlet with Chemraz O-Rings for draining contents. For use with 6517 quick release clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone…