Ace Glass Lab Glass Stopcocks
-
Stopcock Plugs, Double Oblique Bore
Ace GlassDouble oblique bore stopcock plugs available in 1:5 PTFE or Borosilicate.
-
-
Stopcock, Vacuum, PTFE, Low Hold-Up
Ace GlassThreaded vacuum stopcock with PTFE plug and new hooded handle that permits smooth needle valve adjustment down to 0.1cc/min. flow rate. In-line design of barrel offers less hold-up than with 8192 design. Double PTFE ring seals prevent exposure of FETFE
-
-
PTFE Stopcock Valve, 2 Way
Ace GlassPTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE. Compression ferrules made of virgin PTFE.…
-
Stopcock Plug, Inlet Feed
Ace GlassPressure gauges for monitoring pressure in several pieces of apparatus such as pressure vessels, pressure reactors & chromatography columns. Pressure ranges vary from 0-60psi and up to 0-400psi. Gauges have different NPT end fittings and internal materials, as well as various dial ranges. Some come…
-
Stopcock adapter, inner joint bottom, #7 top, stopcock side arm with PTFE plug and hose connection end. Supplied bushing and FETFE o-ring allows compression seal with thermometers, bleed tubes, etc. Will accomodate thermometers or tubes up to 7mm OD. F
-
-
High vacuum stopcock, precision grade, with oblique bore hollow plug.
-
Replacement Stopcock Plug
Ace GlassReplacement stopcock plugs with inlet feeds for rotary evaporators. Codes -08, -10 for Buchi assemblies and -20 for Heidolph 4000 series. All plugs are 19/38.
-
Stopcock Plugs, Straight Bore
Ace GlassStraight bore stopcock plugs, available in borosilicate or PTFE. PTFE plug Corning# 7681.
-
-
Stopcock adapter, top outer joint, bottom inner joint, glass plug. Spherical joint versions are both outer joints top and bottom.
-
Three-way High Vacuum Stopcock
Ace GlassO-Rings available. Three-way high vacuum stopcock for use in combining materials in proportion or as common feed distributed in proportion. Easy action plugs act independently of each other and are connected to a common tubulation through a variable opening. Supplied with FETFE O-Rings. Stem O.D.…
-
Used to regulate and measure flows, all working parts and indicia are visible, meter readings are unobstructed; the outlet swivels 360 degrees. Pressure tight to 2Kg/cm2 or more (air). Flow rates from 5 to 50L/minute air or 0.1 to 500cc/min water. Each tube is furnished with either a 316 stainless…
-
-
Stopcock, Vacuum, PTFE
Ace GlassThreaded vacuum stopcock comes with PTFE plug with hooded, bakeble handle. Needle valve version permits smooth valve adjustment down to 0.1 cc/min flow rate. Easy action version threads into heavy wall glass barrel also permitting smooth adjustment. Do
-
Easy action PTFE plug with hooded handle, threaded into heavy wall glass barrel, permits smooth adjustment. Arms are at 90 degree angle. Double PTFE ring seal prevents exposure of FETFE backup O-Ring to corrosive gases and liquids. Plug, with hooded ha
-
High vacuum stopcock that eliminates exposure to corrosive materials. Use to at least 13.6 Kg internal pressure. Variable openings from 0-3mm to 0-10mm. Ultimate vacuum of 10-7 can be realized with standard three seals. Smooth acting valve permits fine
-
Adapter, Stopcock and syringe port
Ace GlassStandard taper adapter with 8-425 gpi threaded top and a 2mm bore stopcock with a ptfe plug. Syringe port is supplied with a cap and septum.
-
Adapter, Sampling
Ace GlassWith standard taper 24/40 joints and 1:5 solid PTFE stopcock plug connected to side of apron for removing distillate or sample. Plug bore is 2mm. Approximate capacity 125mL. Code -04 has #7 Ace-Thred after stopcock, code -29 has plain tubing.
-
Stopcock adapter, top and bottom o-ring joints, Easy Action plug,/p>
-
-
Adapter, Distillation, Pilot Plant
Ace GlassDistillation adapter for use with Pilot Plant reactors. Simple design collects the distillate above a PTFE stopcock with swagelok compatible take-off. Available with either one or two upper joints.
-
Stopcock, Straight Bore, Glass Plug
Ace GlassA ruggedly constructed stopcock with solid glass plug and tapered flange which insures maximum strength at the seal. Bore of side arms is equal to or slightly larger than bores of plug on all sizes. For plugs, see 8223.
-
Stopcock adapter featuring either a bent or straight hose connection and a PTFE plug.
-
Stopcock, High Pressure, Straight Bore
Ace GlassHigh pressure straight bore stopcock with solid plug.
-
High vacuum stopcock with Tef-Cap O-Ring seals with variable openings from 0-3 to 0-10mm. Eliminate exposure to corrosive materials. For use to at least 13.6 Kg internal pressure. An ultimate vacuum of 10-7 can be realized with the standard three seals
-
Flickit Valve, Riley
Ace GlassQuick-open, valve-type stopcock with glass barrel, PTFE plug, and FETFE O-rings. Unique design allows introduction of particulates or capsules into a system using a rod or plunger. Barrel is angled with respect to the side arms, plug has corresponding
-
High vacuum stopcock with arms at 90 degree with variable openings from 0-3mm to 0-15mm. An ultimate vacuum of 10-7 can be realized with the standard three O-Rings. Smooth acting semi-needle valve permits fine adjustment of opening. Plugs available in
-
High vacuum stopcock with easy action plug that has blunt, flat end instead of the tapered end supplied with 8194 or 8195. This modification means stopcock is a quick opening model versus the variable opening 8194 and 8195. Vacuums of 10-7 can be reali
-
Stopcock, High Vacuum
Ace GlassPrecision grade, with 3-way oblique bore stopcock. Available with a hollow or solid plug.