Chemglass Lab Glass Stopcocks
-
Similar to CG-446, but with the top oblique stem being made of 2mm ID capillary tubing.
-
Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
Centrifuge Tubes
ChemglassTUBES, CENTRIFUGE, 50ML, Centrifuge tube with a short, conical bottom and 24-415 GPI threaded top. Fits I.E.C. shield number 320. Supplied complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring…
-
Replacement one-piece stem and control knob for our NEW 0-14mm drain valve. Available with either a red indicator band used for high temperature applications up to 230°C, or with a blue indicator band used for low temperature applications down to -60°C. The high temperature plug…
-
High Vacuum Straight Bore Stopcocks
ChemglassHollow plug, straight bore stopcock is precision ground and hand-lapped with corresponding numbers on barrel and plug. They are supplied complete with the listed size CG-423 metal retaining clip.
-
High Vacuum T-Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
A 1:5 taper PTFE plug having a threaded needle valve to allow the adjustment of flow through the bore of the plug.
-
Chem-Vac™ Glass Portion Only Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has a single sidearm sealed at a 90º angle to the barrel. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE WITH COARSE THREAD.
-
Chem-Vac™ Hi-Vac Valves
ChemglassCHEM-VAC™ valve has single sidearm sealed at a 90º angle to the barrel. This inexpensive configuration allows for the lower portion of the barrel to be sealed directly to the apparatus being constructed, making for more compact, stronger assemblies. Valve has a TFE plug with three…
-
Four Way PTFE Plug Stopcocks
ChemglassA 1:5 taper PTFE plug having double "V", 90º bores to connect opposite sets of adjacent arms. Configuration of stopcock allows it to be used in a system to obtain reversal of flow.
-
Stopcocks
ChemglassFor replacement or construction of burets having a 1:5 PTFE stopcock plug. One arm is pulled to a delivery tip.
-
Chem-Vac™ Glass Portion Only 90° Valves
ChemglassCHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 90º angle to one another. Heavy duty rounded coarse thread and precision formed tapered seat. Dimensions as listed. PLEASE NOTE: THE 0-20mm BORE SIZE IS OUR PREVIOUS STYLE CG-500 SERIES VALVE…
-
PTFE Tip Valves
ChemglassPTFE TIPHi-vac valve with two sidearms sealed to the barrel at a 90° angle to one another. Designed with a precision external thread for fine control.
-
T-Bore PTFE Plug Stopcocks
ChemglassA 1:5 taper PTFE stopcock with three stems sealed 90º apart. PTFE plug has a "T" shaped bore to connect any two or all three stems.
-
Glass Plug Straight Bore Stopcocks
ChemglassThe 2mm through 6mm bore sizes are supplied complete with the listed size metal retaining clip CG-423. The 8mm and 10mm bore sizes are supplied with a #29 and #34 CG-145 Keck clip respectively.
-
CHEM-CAP, METERING, LOW HOLD UP, CHEM-VAC™ CHEM-CAP® metering valve has an extended tip on the plug to allow semi-needle valve control of gases and liquids. Similar to CG-965 CHEM-VAC™ valve but with the arms bent to minimize hold-up of fluids. See CG-971 for replacement…
-
Straight Bore Glass Plug Stopcocks
ChemglassSTOPCOCKS, STRAIGHT BORE, GLASS PLUGS, CAPILLARY ARMS, Similar to CG-400, but with the sidearms being made of capillary tubing having the same bore as the plug. Supplied complete with metal retaining clip CG-423. STOPCOCKS, STRAIGHT BORE, SCHLENK, GLASS PLUGS, This stopcock is especially…
-
High Vacuum Straight Bore Stopcocks
ChemglassSolid glass high vacuum stopcock with the NEW Chemglass improved constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all…
-
Replacement components for 1:5 taper PTFE plugs. O-rings are Viton, nuts are green, and washers are white.
-
High Vacuum 90° 4mm Stopcock
ChemglassSimilar to CG-476, but with the sidearms sealed at a 90º angle to each other. Precision ground and hand-lapped with corresponding numbers on barrel and plug.
-
Pressure Relief Valve Complete
ChemglassAutomatic, adjustable pressure relief valve is for use on apparatus where internal pressure build-up is a concern. Tension on the stainless steel spring is adjusted by turning the top control knob in or out and will relive pressures from 5 to 50 PSI. Two-piece stem is made of PTFE and is fitted…
-
High Vacuum Single Oblique Stopcock
ChemglassSolid plug, oblique bore stopcock is precision ground with corresponding numbers on barrel and plug. Lower vacuum chamber is evacuated with a separate hole in the plug which is not in the line of flow.
-
S-Type Exposed O-ring Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 180° angle to one another and on the same plane.
-
Straight Bore 1-Arm Capillary Stopcocks
Chemglass1-ARM CAPILLARY Similar to CG-424, but with one arm being made of 2mm ID capillary tubing. CAPILLARY ARMS Similar to CG-424, but with both arms being made of 2mm ID capillary tubing.
-
Solid glass plug has a threaded glass snelling which accepts an assembly similar to the one supplied with standard PTFE stopcocks. This consists of a PTFE washer, PTFE nut and Viton O-ring. Assembly provides for uniform seating tension to be applied to the plug which is precision ground and…
-
General Purpose Threaded Stopcock
ChemglassSimilar to CG-595, but with the arms bent to minimize hold-up.
-
Organic Chemistry Labset Kit
ChemglassORGANIC CHEMISTRY LABSET KITS, 19/22, Chemglass organic chemistry kits contain the basic glassware required to perform basic experiments such as vacuum or atmospheric distillation, reflux or reflux with addition, extraction as well as other organic experiments. Each kit contains the 14 glass items…
-
Exposed O-ring Tip Valves
ChemglassVALVES, IN-LINE, EXPOSED O-RING TIP, Hi-vac valve with bent arms to minimize hold up of fluids that would occur in conventional valves. Designed with a precision external thread for fine control. VALVES, 3-WAY, EXPOSED O-RING TIP, Hi-vac valve with three way configuration for use in construction…
-
High Vacuum Double Oblique Stopcocks
ChemglassSolid glass high vacuum stopcock with the Chemglass constant pressure retention device. This unique retaining system incorporates a glass plug having an extended snelling which accepts a stainless steel spring and clip. The spring keeps constant tension on the plug at all times and is easily…
-
T-BORE, CAPILLARY ARMS, Similar to CG-436, but with all three arms being made of 2mm ID capillary tubing. 120°, A 1:5 taper PTFE stopcock with three sidearms sealed 120º apart. Plug has a bore to allow connection of any two arms at once.
-
180° PTFE Tip Valves
ChemglassHi-vac valve with two sidearms sealed to the barrel at a 180° angle to one another and on the same plane.
-
CHEM-VAC™ valve glass portion only. Valve has two sidearms sealed to the barrel at a 180º angle to one another and bent to minimize hold up of fluids. Heavy duty rounded coarse thread and precision formed tapered seat.