Stopcocks

Compare Tool

Select up to 3 products

1 - 32 of 177
Sort
View
Show
  • Centrifuge Tubes

    Chemglass

    TUBES, CENTRIFUGE, 50ML, Centrifuge tube with a short, conical bottom and 24-415 GPI threaded top. Fits I.E.C. shield number 320. Supplied complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring…

  • ORGANIC CHEMISTRY LABSET KITS, 19/22, Chemglass organic chemistry kits contain the basic glassware required to perform basic experiments such as vacuum or atmospheric distillation, reflux or reflux with addition, extraction as well as other organic experiments. Each kit contains the 14 glass items…

  • Automatic, adjustable pressure relief valve is for use on apparatus where internal pressure build-up is a concern. Tension on the stainless steel spring is adjusted by turning the top control knob in or out and will relive pressures from 5 to 50 PSI. Two-piece stem is made of PTFE and is fitted…

  • Stopcock, High Vacuum, Straight Bore, Synthware, Bore: 2, 4 and 6mm available, Plug Size: 12/30, 17/40, and 20/44 available, Stem OD: 8mm, plug is precision ground and hand lapped with corresponding numbers on barrel and plug.

  • Air-sensitive sample handling adapter features either a glass or PTFE t-bore stopcock, standard taper joint and septum port arms. Supplied with two septa, Ace 9096 family.

  • Polypropylene with Teflon® TFE plug No lubrication required Offered in 2 mm and 4 mm bore sizes Arms are five-mm bore, serrated to take 1/4 to 7/16 inch rubber tubing

  • Stopcock adapter, top outer joint, bottom inner joint, Easy Action plug

  • Metering valve, with 1:5 PTFE straight bore plug, provides fine control of rate of flow. With polished barrels. For plug only, see 8232.

  • Metal retaining clip is designed to apply pressure against the stopcock plug and barrel. Clips eliminate blow-out and loose fit while minimizing freezing. They are made from high carbon tempered spring steel having a green corrosive resistant, phosphate base finish.

  • These replacement parts are for use with high vacuum, PTFE stopcocks (LG-10282 and LG-10283).

  • Very sturdy and robust spigot made of stainless steel AISI 304 (1.4301). The outlet of the spigot turns 360° so it can be adjusted to any required position. With a practical suspension device for filling container and eyelet for shutting off the spigot. Seals PTFE, FKM Self-closing …

  • Used with distilling head to enable operator to determine reflux ratios and take-offs. Described in Industrial and Engineering Chemistry, Volume 14, No. 11, Page 902, Nov. 15, 1942.

  • Precision grade, straight thru, high vacuum stopcock. Available with a hollow or solid plug.

  • STOPCOCKS, STRAIGHT BORE, GLASS PLUGS, CAPILLARY ARMS, Similar to CG-400, but with the sidearms being made of capillary tubing having the same bore as the plug. Supplied complete with metal retaining clip CG-423. STOPCOCKS, STRAIGHT BORE, SCHLENK, GLASS PLUGS, This stopcock is especially…

  • PTFE Straight Stopcock Plugs

    DWK Life Sciences (Kimble)

    PTFE stopcock plug has a 1:5 taper PTFE  is chemically-resistant and self-lubricating

  • Similar to 8652N30 series, but with three arms Stopcock has T-shaped bore for connecting any two or all three arms Offered in 2 mm and 4 mm bore sizes Arms serrated to take 1/4 to 3/8 inch tubing

  • Threaded vacuum stopcock comes with PTFE plug with hooded, bakeble handle. Needle valve version permits smooth valve adjustment down to 0.1 cc/min flow rate. Easy action version threads into heavy wall glass barrel also permitting smooth adjustment. Do

  • High vacuum stopcock with arms at 90 degree with variable openings from 0-3mm to 0-15mm. An ultimate vacuum of 10-7 can be realized with the standard three O-Rings. Smooth acting semi-needle valve permits fine adjustment of opening. Plugs available in

  • T-BORE, Similar to CG-458, but with three stems sealed 90º apart. Solid glass plug has a "T" shaped bore so that any two or all three arms can be connected at one time. Plug is precision ground and hand-lapped with corresponding numbers on the barrel and plug. DOUBLE OBLIQUE BORE,…

  • High Vacuum Valve, 180 Degree, PTFE Protected, Synthware, Size: 0-4, 0-8, 0-12mm available, Side Arm OD: 9mm.

  • Pressure gauges for monitoring pressure in several pieces of apparatus such as pressure vessels, pressure reactors & chromatography columns. Pressure ranges vary from 0-60psi and up to 0-400psi. Gauges have different NPT end fittings and internal materials, as well as various dial ranges. Some come…

  • High Vacuum Valve Plug, Synthware, Size: 0-4, 0-8, and 0-12mm available, Stem Material: PTFE,O-rings Material: Viton.

  • Valve High Vac PTFE Sz 12

    DWK Life Sciences (Kimble)

    This straight high-vacuum valve is for use in vacuum applications up to 5 x 10-7 Torr. Designed with a precision external thread for fine control Can be used as a bleed up to 1/2 turn Full open position is at 1-1/2 turns Primary seal is made with a FKM o-ring on a tapered seat …

  • High Vacuum Valve, Low Hold Up, Metering, Synthware, Size: 0-4, 0-8, 0-12mm available, Side Arm OD: 9mm.

  • These high performance Rotaflo® 90° angle stopcocks can be adjusted from a 0 to 6mm bore opening and have 10mm O. D. sidearms. They are designed so that only chemically resistant Polytetrafluoroethylene (PTFE) and PYREX® borosilicate glass are in contact with liquids and gases. …

  • Precision grade with T-Bore hollow or solid plug.

  • Distillation adapter for use with Pilot Plant reactors. Simple design collects the distillate above a PTFE stopcock with swagelok compatible take-off. Available with either one or two upper joints.

  • High vacuum straight thru stopcock available with several types of Easy Action plugs including bakeable PTFE, PTFE stem with glass filled PTFE threads, and glass with Nylon handle, for allowing smooth adjustment. A variety of replacement items are avai

  • Teflon Straight Bore Stopcocks

    DWK Life Sciences (Kimble)

    Complete with nut, O-ring, washer For replacement in glassware originally supplied with Teflon straight bore plugs

  • Valves, In-Line, Rotaflo® For vacuum or pressure work Borosilicate glass, with Teflon® stem providing chemically inert seal Require no lubrication Permit precide control of liquid or gas flow at temperatures from -40°C to +200°C Maximum vacuum 10 -8 torr…

  • For connecting inert gas and vacuum sources Grease-free, fine control is provided by 4 mm PTFE HI-VAC® valves. Sample contacts only PTFE and borosilicate glass. Beams are 1/2” (12.7 mm) O.D. with upper left and lower right ends open. Delivery ports are 9 mm O.D and the distance…

  • Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.