Columns, Chemicals, MACHEREY-NAGEL
-
CHROMABOND® C8
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
NUCLEOGEL® SUGAR HPLC Columns
MACHEREY-NAGELPolymer-based HPLC phases for separation of sugars Separation mechanism includes steric exclusion, ligand exchange and partition effects, ligand exchange being the predominant force, since the hydrated metal ions form strong interactions with the hydroxyl groups of the sample molecules. …
-
OPTIMA® 1 Capillary Columns
MACHEREY-NAGELOPTIMA® 1 Capillary columns for GC Features 100 % dimethylpolysiloxane · USP G1 / G2 / G38 Nonpolar phase Separation of components according to boiling points Thick film columns ≥ 3 µm film are expecially recommended for solvent analysis. Low bleed…
-
CHROMABOND® C6H5
MACHEREY-NAGELPhenyl-modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Phenyl phase, carbon content 8 %, polarity similar to C8 In addition to hydrophobic interactions more selective…
-
NUCLEODUR PFAS
MACHEREY-NAGELHydrophobic reversed phase with distinct polar selectivity for special PFAS analysis. Suitability for PFAS analysis is assured through qualified batch analysis. This HPLC phase is made of high purity NUCLEODUR HPLC silica gel and is extensively endcapped. Due to a low bleeding characteristics these…
-
NUCLEODUR® C18 Pyramid HPLC Columns
MACHEREY-NAGELNUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…
-
LIPODEX® Capillary Columns
MACHEREY-NAGELLIPODEX® cyclodextrin phases Capillary columns for GC enantiomer separation Features Base material: cyclic oligosaccharides consisting of six (α-cyclodextrin), seven (β-cyclodextrin) or eight (γ-cyclodextrin) glucose units bonded through α-1,4-linkages …
-
CHROMABOND® NH2
MACHEREY-NAGELFeatures More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…
-
NUCLEOSHELL® Phenyl-Hexyl HPLC Columns
MACHEREY-NAGELNUCLEOSHELL® core-shell silica phases for HPLC NUCLEOSHELL® Core-shell technology provides Better resolution at lower back pressure and shorter retention time Solid core of silicon dioxide Homogeneous shell of porous silica Highest efficiency compared to traditional…
-
CHROMABOND® Easy
MACHEREY-NAGELPolar, bifunctionally modified polystyrene-divinylbenzene copolymer Features Polar modified polystyrene-divinylbenzene copolymer with a weak anion exchanger, specific surface 650–700 m2/g, particle size 80 µm, pore size 50 Å, pH stability 1–14 The Easy…
-
OPTIMA® 1 MS Accent Capillary Columns
MACHEREY-NAGELOPTIMA® 1 MS Accent Ultra-low bleed capillary columns for GC Features 100 % dimethylpolysiloxane · USP G1 / G2 / G38 Nonpolar phase with ultra-low bleeding, ideal for ion trap and quadrupole MS detectors Increased sensitivity due to an unmatched low background level …
-
CHROMABOND® HILIC
MACHEREY-NAGELAmmonium – sulfonic acid modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g zwitterionic polar phase with ammonium – sulfonic acid modification, carbon content 7 %, pH stability 2-8 Polar…
-
NUCLEODUR® C18 Gravity-SB HPLC Columns
MACHEREY-NAGELNUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…
-
OPTIMA® 225 Capillary Columns
MACHEREY-NAGELOPTIMA® 225 Capillary columns for GC Features 50 % cyanopropylmethyl – 50 % phenylmethylpolysiloxane · USP G7 / G19 Medium polar phase Recommended for fatty acid analyses Similar phases: DB-225, HP-225, OV-225, Rtx-225, CP-Sil 43, 007-225, BP225 Max.…
-
NUCLEOSIL® PPN HPLC Columns
MACHEREY-NAGELNUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…
-
NUCLEODUR® C18 ec VarioPrep HPLC Columns
MACHEREY-NAGELVarioPrep (VP) columns for preparative HPLC Features Column system for preparative HPLC manufactured from stainless steel with two adjustable end fittings, e.g., for frequent use of backflushing techniques Allows compensation of a dead volume, which could result at the column inlet…
-
NUCLEOSHELL® HILIC HPLC Columns
MACHEREY-NAGELNUCLEOSHELL® core-shell silica phases for HPLC NUCLEOSHELL® Core-shell technology provides Better resolution at lower back pressure and shorter retention time Solid core of silicon dioxide Homogeneous shell of porous silica Highest efficiency compared to traditional…
-
NUCLEODUR® C18 Gravity VarioPrep HPLC Columns
MACHEREY-NAGELVarioPrep (VP) columns for preparative HPLC Features Column system for preparative HPLC manufactured from stainless steel with two adjustable end fittings, e.g., for frequent use of backflushing techniques Allows compensation of a dead volume, which could result at the column inlet…
-
NUCLEOGEN® DEAE HPLC Columns
MACHEREY-NAGELSilica-based HPLC phases for anion exchange chromatography of nucleic acids Features Base material silica, particle size 7 µm DEAE anion exchanger NUCLEOGEN® 60-7 DEAE: Pore size 60 Å Capacity 200 A260/mL (~ 300 A260 for a 125 x 4 mm ID column, 1875 A260…
-
NUCLEOGEL® SAX HPLC Columns
MACHEREY-NAGELNUCLEOGEL® SAX Polymer-based HPLC phases for anion exchange chromatography of biological macromolecules Features Polymer-based strongly basic anion exchanger -N+(CH3)3, gel matrix quaternized PEI · USP L23 Particle size 8 µm Pore size 1000 Å pH working range…
-
NUCLEODUR® C8 ec HPLC Columns
MACHEREY-NAGELNUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…
-
CHROMABOND® XTR
MACHEREY-NAGELKieselguhr phase for liquid-liquid extraction Features Base material coarse-grained kieselguhr (also known as diatomaceous earth, hydromatrix, celite) large pore size, high pore volume, constantly high batch-to-batch quality pH working range 1–13 Application: …
-
CHROMABOND® Florisil®
MACHEREY-NAGELMagnesium silicate for SPE Features Matrix magnesium silicate (MgO – SiOH 15:85), high purity, particle size 150–250 µm Recommended application: organic tin compounds, aliphatic carboxylic acids, PCBs, PAHs
-
NUCLEODUR® C8 Gravity HPLC Columns
MACHEREY-NAGELNUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…
-
Untreated Capillaries
MACHEREY-NAGELUntreated capillaries Recommended application: Capillary electrophoresis Preparation of capillary columns Capillary LC applications
-
NUCLEODUR® PolarTec HPLC Columns
MACHEREY-NAGELNUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…
-
CHROMABOND® SB
MACHEREY-NAGELQuaternary ammonium modified silica anion exchanger for SPE (SAX) Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 silica modified with quaternary amine strongly basic anion exchanger (capacity ~ 0.3…
-
RESOLVOSIL BSA-7 HPLC Columns
MACHEREY-NAGELRESOLVOSIL BSA-7 Silica-based protein phase for HPLC enantiomer separation Features Base material NUCLEOSIL® silica, particle size 7 µm, pore size 300 Å Chiral selector bovine serum albumin (BSA) · USP L75 Separation based on selective interaction of…
-
CHROMABOND® CN
MACHEREY-NAGELCyanopropyl modified silica phase for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 cyanopropyl phase, carbon content 5.5 %, polar to mid-polar In addition to weak hydrophobic interactions…
-
HYDRODEX Capillary Columns
MACHEREY-NAGELHYDRODEX cyclodextrin phases Capillary columns for GC enantiomer separation Features Base material: cyclic oligosaccharides consisting of seven (β-cyclodextrin) or eight (γ-cyclodextrin) glucose units bonded through α-1,4-linkages Regioselective derivatization…
-
CHROMABOND® PA
MACHEREY-NAGELCHROMABOND® SPE products Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special…
-
CHROMABOND® HR-XCW
MACHEREY-NAGELWeak carboxylic acid modified polymeric cation exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 50–60 Å, particle sizes 45 µm or 85 µm (standard), very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH stability…