µBondapak C18 columns are general purpose, silica-based, reversed-phase C18 columns that are based on 10 µm particle technology. As a starting point for preparative chromatography, no other column can provide the balance between resolution, throughput and cost.

Analyze inorganic and organic cations using conductivity or UV detection. Separate mono or divalent cations depending on mobile phase conditions from 20 ppb to 200 ppm. Replacement Cartridge Stainless Steel Particle size: 10 µm

High efficiency separations at any pH The Hamilton PRP-C18 is a new HPLC column designed to provide high-efficiency, reversed-phase separations over an extended column life in nearly any mobile phase or pH. The rigid stationary phase has excellent mechanical and thermal stability (>…

High pressure (600 bar) columns for ultra high speed or maximum resolution analyses with Rapid Resolution HT columns packed with totally porous, 1.8 µm packings Carefully engineered particles deliver maximum resolution at 25% less pressure than other sub 2-micron materials Reduce…

The high purity silica found in YMC-Pack Silica columns provides virtually complete sample recovery. The absence of silica impurities reduces non-specific sample adsorption which lowers sample recovery and may cause unusual peak shapes. The totally porous nature of the silica found in YMC-Pack…

Synonym: TSKgel® Size Exclusion (SW-Type) HPLC Column Physical form 20S isomer General description As the first generation of silica-based SEC columns, TSKgel G2000SW provides excellent separation of peptides and proteins with molecular weights up to 100,000 Da.TSKgel…

High loadability for maximum sample purification Easy scalability from 4.6 mm ID up to 50 mm ID for rapid method development High throughput 21.2 mm ID cartridges for fast purification Exceptional column stability and loadability up to pH 10 Agilent Prep LC columns are designed for…

Accucore C18 columns offer optimum retention for non-polar compounds and separation of a broad range of analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations – without the elevated backpressures required by sub-2µm particles. Fast…

SMT manufactures columns with short carbon chains for rapid analysis of basic, neutral, and mildly acidic drugs and small molecules. These columns provide excellent baseline resolution for small basic molecules including therapeutic drugs. The bonding scheme ensures proper deactivation substrate…

Legal Information: Supelguard is a trademark of Sigma-Aldrich Co. LLC

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

Metal-free HPLC column SeQuant® ZIC®-HILIC is the ideal choice for separation of polar and hydrophilic compounds. The high-performance, truly zwitterionic stationary phase, ensures reproductible retention of all types of compounds that have poor retention and are difficult to separate…

Ascentis Express HPLC columns, through the use of Fused-Core® particle technology, can provide you with both the high speed and high efficiencies of sub-2 mum particles while maintaining lower backpressures. The combination of high efficiency and low backpressure benefits UPLC® (or other ultra high…

YMC-Pack TMS columns are bonded with trimethylmonochlorosilane to create a phase with intermediate polarity for analysis of extremely hydrophobic compounds using conventional reversed-phase solvents and highly polar compounds using highly aqueous solvents. The unique chemistry of TMS is also…

SUMICHIRAL OA columns are high-performance chiral columns for enantiomer separation by HPLC. On SUMICHIRAL OA columns direct separation of various enantiomers can be realized effectively. Enantiomeric separation is achieved from the various diastereomeric interactions such as hydrogen bonding,…

Silica-based HPLC phases for anion exchange chromatography of nucleic acids Features Base material silica, particle size 7 µm DEAE anion exchanger NUCLEOGEN® 60-7 DEAE: Pore size 60 Å Capacity 200 A260/mL (~ 300 A260 for a 125 x 4 mm ID column, 1875 A260…

In a reversed-phase mode, Cyano columns are the most polar and least retentive of all reversed-phase packings. Extremely hydrophobic compounds, which do not elute on standard C18 and C8 packings with typical reversed-phase eluents, can be chromatographed using Cyano columns. In addition, the unique…

Separates transition metals or mono and divalent cations in the same run.  The PRP-X800 is a polymeric cation exchange column functionalized with itaconic acid that performs the isocratic separation of mono and divalent cations such as lithium, sodium, ammonium, potassium, magnesium and…

Accucore PhenylHexyl columns offer unique selectivity for aromatic and moderately polar analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with…

Optimize conventional HPLC methods with Thermo Scientific™ Accucore™ XL C18 LC Columns. Rugged 4µm solid-core particles ensure very high efficiencies within standard HPLC pressure limits. The high bonded phase coverage provides optimal retention of a broad range of nonpolar…

SMT-C12 columns consist of Dodecyl as the functional ligand. The columns offer selectivities that are slightly different from C8 and C18 reversed-phase columns when applied to separation of polyaromatic hydrocarbons. SMT-C12 columns are specially designed as complementary alternatives for the…

Oil baths heated by Instatherm®, an integral noble metal alloy fused permanently to the glass & covered with a tough silicone rubber treated glass cloth insulation which serves as a thermal barrier as well as protection against physical shock. Rapid heat response - low thermal lag. For…

SMT Urea columns consist of proprietary hydrophilic molecule as the functional ligand. The columns offer water-soluble functionality and selectivities that are different from other reversed-phase or normal phase columns when applied to separation of polar and basic compounds. SMT-Urea columns are…

In areas like drug discovery where target compounds are increasingly polar, it is critical to have a reversed-phase column that performs well under aqueous conditions. Retention is critical, but cannot come with troublesome secondary interactions. From the collapse-resistant pore structure of…

YMC-Pack C4 (Butyl) columns are less hydrophobic than C8 or C18 packings, and generally utilize more aqueous eluents than either of these reversed phase column types. When compared to C8 and C18 columns using the same eluent, C4 columns show significantly shorter retention for non-polar compounds.…

EC Number: 276-161-8 eCl@ss 32110501 General Description The amino column is most often employed for the separation of mono- and disaccharides. As a normal-phase application, amino columns are used in the petroleum industry. Legal Information SUPELCOSIL is a trademark of…

SUMICHIRAL OA columns are high-performance chiral columns for enantiomer separation by HPLC. On SUMICHIRAL OA columns direct separation of various enantiomers can be realized effectively. Enantiomeric separation is achieved from the various diastereomeric interactions such as hydrogen bonding,…

eCl@ss: 32110501 Features and Benefits Excellent reproducibility Faster separation of strongly hydrophobic analytes than C18 columns Stable, low-bleed LC-MS separations Exceptional peak shapes for basic and acidic compounds Compatible with low organic/highly aqueous…

SMT manufactures very stable aminopropyl [NH2] columns. SMT aminopropyl columns are often recommended for the separation of polar compounds and can be used in three separation modes: Normal Weak Anion Exchange Reversed-Phase In normal phase mode, the columns can be used to…

The polymeric SeQuant® ZIC®-pHILIC columns is designed for particularly difficult separations of polar and hydrophilic compounds. The high-performance, truly zwitterionic stationary phase is attached to porous polymer beads and tolerates pH from 2-11. This medium 150 mm column is suitable…

Vacuum jacketed and silvered with observation stripe. Also available unsilvered. With an enlarged bulb knockdown section that removes high boiling ends without choking. Length of packing section is 100 or 200mm, I.D. approximately 10mm. With indents to

SUMICHIRAL OA columns are high-performance chiral columns for enantiomer separation by HPLC. On SUMICHIRAL OA columns direct separation of various enantiomers can be realized effectively. Enantiomeric separation is achieved from the various diastereomeric interactions such as hydrogen bonding,…