LC Chromatography Columns

Compare Tool

Select up to 3 products

HomeAll Products

Columns LC Chromatography Columns

1 - 32 of 989
Sort
View
Show

Attention Thomas Scientific Customers

Due to current pandemic, lead times for PPE items are longer than what is listed on our website. Please expect shipping delays of all PPE products during this time.

  • Brownlee CHOICE C18 columns are packed with small pore (60) silica, with a high surface area allowing for dense ligand bonding. An excellent choice for MS applications.

  • A traditional end-capped C18 ideal for general-purpose use in reversed-phase chromatography Wide pH range (2–8) provides excellent data quality for many applications, matrices, and compounds Offers high hydrophobic retention Similar Phase(s): Discovery C18, Symmetry C18, Hypersil…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a reinforced beaded top. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent…

  • BDS-Hypersil-C8 5µm Columns

    Thermo Scientific

    Excellent choice for acids, bases and neutral compounds Less retentive than C18 for faster analyses Robust columns with long column lifetimes Very reliable for routine assays Thermo Scientific Hypersil BDS…

  • Polymeric anion exchange packings for separation of inorganic and organic anions. Easily separate the eight common anions (fluoride through sulfate) Good separation of fluoride from the water dip Use with organic solvent from 0 to 100 % for elution of hydrophobic anions or column…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Top Joint: ST 24/40. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to…

  • SYNTHWARE short chrmoatography column with a lower standard taper 24/40 inner joint with a sealed in drip tip and a hose connection. Designed to perform seperations using a vacuum source. All sizes have a fritted disc to support column packing.

  • Syncronis™ C8 LC Columns

    Thermo Scientific

    Improve the consistency and reliability of your liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C8 LC columns. High-purity, high surface area silica and dense stationary phase coverage minimize secondary interactions and deliver reproducible, high-efficiency…

  • ODS Hypersil 5µm Columns

    Thermo Scientific

    High efficiency and proven reproducibility Exceptionally reliable Separation of a wide range of compounds including nonpolar, moderately polar and lipophilic compounds like triglycerides Thermo Scientific Hypersil ODS (C18) Columns…

  • Hypersil GOLD 3µm Columns

    Thermo Scientific

    Significant reduction in peak tailing while retaining C18 selectivity Excellent resolution, efficiency and sensitvity Confidence in the accuracy and quality of analytical data Thermo Scientific Hypersil GOLD HPLC Columns are endcapped, ultrapure, silica-based columns with…

  • Ultra HPLC Columns The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications. …

  • BDS-Hypersil-C18 5µm Columns

    Thermo Scientific

    Original Hypersil columns from the manufacturer Base deactivated with minimal residual silanol activity Exceptional reproducibility Economical, general purpose columns Thermo Scientific Hypersil BDS 5µm C18 Columns are a good choice for QA/QC labs as a robust general-purpose…

  • 316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules Preassembled prior to shipment Internal 1/16" seats are compatible with Valco and Parker fittings

  • Ultra HPLC Columns The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications. …

  • Chromatographic column with 2mm bore, 1:5 taper solid PTFE stopcock plug and porosity B (70 - 100 m) fritted disc sealed in at bottom and #15 Ace-Thred at top of column. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring and 5853-07…

  • Ultra HPLC Columns The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications. …

  • Column has standard taper 24/40 joint at top and 2 mm bore stopcock at the bottom with Por. B (70-100m) fritted disc sealed into the bottom of tube.

  • Separate cationic molecules with powerful adjustable selectivity control using Thermo Scientific™ Acclaim™ Mixed-Mode WCX-1 LC columns. The silica-based stationary phase features a hydrophobic alkyl chain with a carboxyl terminus that provides both hydrophobic reversed-phase and weak…

  • Injection reservoir bulb with Ace-Thred ends. 250mL to 3000mL sizes.

  • Viva HPLC Columns: 3 or 5 µm particles; 300 Å pore size Excellent for separating peptides or proteins Rugged, spherical particles with 300 Å pore size High proportion of pore/surface area available to large molecules Viva columns are based on a wide pore material…

  • Viva HPLC Columns: 3 or 5 µm particles; 300 Å pore size Excellent for separating peptides or proteins Rugged, spherical particles with 300 Å pore size High proportion of pore/surface area available to large molecules Viva columns are based on a wide pore material…

  • Brownlee SPP 2.7 mm C8 2.1 X 100 mm

  • SYNTHWARE chromatography reservoir with standard taper 24/40 Rodaviss joints. Designed for use with flash chromatography. Supplied complete with open top cap, Viton o-ring and loosenig ring.

  • Rugged columns with internally threaded ends to which a wide choice of upper and lower end pieces can be fitted using 5837, 5838, 5841, 5842, and 5843 fittings. Available in a variety of lengths and diameters. Some sizes available with epoxy coating for added protection against scratches.

  • SYNTHWARE chromatography flow adpater with a 0-4 mm high vacuum PTFE valve with metering tip to adjust the air pressure. The o-rings on the valve are completely encapsulated with a thin layer of PTFE, making it inert to most chemicals. Foruse with columns having a Rodaviss 24/40 outer joint.

  • Syncronis™ C18 Columns

    Thermo Scientific

    Achieve repeatable and consistent liquid chromatography (LC) separations using Thermo Scientific™ Syncronis™ C18 columns. Highly pure, high surface area silica and dense stationary phase coverage minimize secondary interactions and ensure robust, high-resolution separations. Double…

  • Ultra HPLC Columns The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications. …

  • G-Biosciences present several empty low pressure chromatography columns. The columns and its parts are made of polypropylene which is chemically resistant to most of the commonly used reagents for chromatography. The end adaptors supplied with the column contain 10-32 UNF connections which are…

  • SYNTHWARE general purpose chromatography column with heavy wall design. With reinforced beaded top. Supplied with a PTFE stopcock. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is used with positive air…

  • SYNTHWARE chromatography reservoirs with standard taper 24/40 joints or spherical 35/20 joints. Designed for use with flash chromatography.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.