ICP-MS

Agilent ICP-OES inert torches with alumina/ceramic injectors allow the analysis of samples containg hydrofluoric (HF) acid. HF resistant torches/injectors are suitable for handling HF digests unlike standard quartz injectors where the free HF attacks and degrades the quartz components. Inert torches...

The Agilent Technologies 2 mm injector assembly with twisting capability is made from PFA-platinum material that ensures a smooth flow of liquid. Application: For ELAN DRC-e/9000/6x00/5000/500/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use...

Demountable design using one-piece quartz tubing for plasma and auxiliary gas flow. Available in a wide range of styles from 0-slot to 3-slot torches, depending on instrument and application needs. Torches without slots are recommended for organic solvents. 1-slot torches are the standard torch for...

The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.

The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully...

Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safely and easily restored to optimum performance with a revolutionary new cleaning instrument - the Eluo. The Eluo is designed to efficiently deliver a cleanser through the nebulizer...

The MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and...

Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow...

The Axial View Purge Extension Window is a replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial View Purge Extension Window Tube is a replaceable quartz Tube that slides into the mount between the torch and the optics for the radial view.

Replacement tubing for internal standard kit.

One Sample Introduction Line for PFA-ST Nebulizer is included in the NexION 2000 ICP-MS Productivity Configuration's Consumable Kit (N8150056) and the Semi Configuration's Consumable Kit (N8150057).

0. 5 meters of . 044 OD X . 018 ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.

Agilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application: For...

200 µL/min self-aspirating sample capillary for ST nebulizer. 0.30 mm i.d., yellow marker

The D-Torch is a revolutionary new demountable torch design with interchangeable outer Tubes. Quartz outer Tubes are ideal for most aqueous samples, while ceramic outer Tubes last longer for samples with high dissolving solids or for organic applications, such as wear metals in engine oils.

The Agilent Technologies nebulizer end cap is the perfect accessory to provide a leak-tight seal on any Cross-Flow nebulizers. Application: For Cross-Flow II nebulizer, for all GemClean Cross-Flow II Nebulizers, ELAN 9000/6xX00/DRC/NexION, PerkinElmer This product is only available to U.S. Domestic...

Agilent nebulizers and supplies are equivalent to the PerkinElmer ICP-MS versions. These parts provide the best precision and reduced interferences, so you can use them with complete confidence. They come complete with the PE gas and liquid connectors for use right out of the box. Application: For...

PerkinElmer, Fitting, male barb, chlorotrifluoroethylene CTFE, for sample inlet fitting used with type A/C/K nebulizers. Suitable for ELAN 9000/6xX00/DRC and NexION. Application: For Sample Inlet Fitting used with Type A/C/K Nebulizers. Suitable for Elan 9000/6Xx00/DRC & NexION This product is only...

The Agilent Technologies concentric micromist nebulizer measuring 0.5 m ID x 1.3 mm OD is compatible to use with 700 mm sample tubing. This nebulizer with an uptake rating of 200 is made from strong borosilicate and conforms well with aqueous, HF acid, organic solvents and strong acids. Application:...

The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. It is corrosion resistant and is inert to most mineral acids, including hydrofluoric acid, aqua regia, and all...

PFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.

High solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High...

1 mL/min self-aspirating sample capillary for ST nebulizer 1 mm i.d., gray marker

Used to connect capillary tubing (Product Number: 09908265) to Cross-flow nebulizers, and to larger i.d. peristaltic pump tubing.