Bellco Glass

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring...

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 9/16? (39.6mm) Tube Size: 38mm Spacing: 2x6 Holds 12 Tubes Dimensions: 10" X 3 1/2" X 2 7/8" Minimum...

The CellTrol II control module monitors bioreactors process values and performs PLC (Allen-Bradley Programmable Logic Controller) based process control. A touch screen operator interface provides access to all PLC based control functions and allows viewing and modification of control parameters....

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 19/32? (15MM) Tube Size: 13mm Spacing: 6x12 Holds 72 Tubes Dimensions: 8 1/6" X 4 1/8" X 2" Minimum Requirement:...

PTFE Ferule 1/2" for Foam Probe

Long skirted screw caps with rubber liners. Autoclavable, black mineral-filled phenolic resin White rubber liners sealed into cap 14B white rubber (FDA classification) Deep skirt reduces risk of contaminatio

The Bellco Low Profile PTFE Impellers are designed to be used with Bellco Low Profile Cell Culture vessels. These low profile impeller consist of a semi-rigid PTFE blade, PTFE paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Specifications: Paddle Size: 3" x 6 3/4"...

Enhance your cell culture and bioprocessing capabilities with the Bellco Glass BioFactory Holder. This high-quality holder, individually wrapped to ensure sterility, is designed for single-use, minimizing cross-contamination risk. Each pack contains one holder, with five packs per case, providing a...

The Bellco Process Controlled Top Drive Roller Apparatus has a capacity of either 53 or 86 full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length), depending upon model. The unit features a brushless DC motor and controller that operate at bottle speeds ranging...

Round Cover Slips, German Glass. Ideal for neural tissue cell cultures and hard-to-attach cells. Specially developed for fluorescence and confocal microscopy. #1 thickness.

Bench Mount Fixture Specifications: Accommodates Single And Dual Element Models Cast Iron Base

Manufactured from Type 1 Class A Borosilicate Glass. These media storage bottles are chemically resistant ans stable. They are suitable for storage as well as for mixing and sampling. They are autoclavable and have white graduations and marking spot. On sizes 100-2000mL there is a full capacity...

Designed for use of preparing cell suspensions and gel extraction of proteins. Manufactured from all stainless steel. Available with 85mL or 130mL pans. Specifications: Stainless Steel Size: 85ml Prepare Cell Suspensions And Gel Extraction Of Proteins All Stainless Steel Construction Pan Dimensions:...

Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in reflux or distillation operations. Specifications: Size: 3-7L

The Bellco Mini Tube Roller is a variable speed roller unit for general laboratory usage. The compact size is ideal for experimental and pilot-scale operations. Methods developed on this unit can easily be scaled up. Robustly constructed and designed for easy cleaning, with EPDM rubber rollers to...

Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Break resistant lip to prevent chipping. Specifications: Type 1 Class A Borosilicate Glass Sizes: 2800ml Dimensions: 210x225mm Stopper Size: 13 Case Quantity: 3...

Inserts are preassembled with a polymer bottom spring. The polymer spring acts as a shock absorber that protects against breakage if the needle bottoms out. The conical design permits complete sample removal. Specifications: Conical Bottom Sizes: 150 Case Quantity: 100

Open top caps are ideal for applications requiring addition/withdrawal of vessel contents. Autoclavable to 140ºC.

Gas Blending Stand Includes: 4 Gases (4) Rotometers (1) Tripod Stand (4) 1/4" Barb X 1/8"Mnpt (3) Branch T's" 1/8" Fnpt X 1/4" Tube Fittings (1) 1/8" Mnpt X 1/4" Tube Female Fitting  

Plates, single well, 384 channel troughs, high profile (195ml, No Cap), Non-Sterile, 10/pk, 50/cs

Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work. Polystyrene tubes provide clarity and are appropriate for use with mild acidic (except oxidizing acids) or alkali solutions, alcohols (except higher alcohols) and salt. Polypropylene tubes are more chemically...

Used for snap thread vials.Caps may be snapped on and off by hand which eliminated the need for a metal crimping and decapping tool. Specifications: Size: 11mm Septa Material: Ptfe Case Quantity: 1000

Manufactured from Type1 Class B Borosilicate Glass. Large opening and sloping shoulders facilitate pouring and cleaning. Heavier walls prevent breakage of glass. Media storage bottles have white graduations and a marking area. They are supplied with rubber lined 33mm black phenolic screw cap....

SST Ultra-Vented Inc Shelf For Bellco Roll-in Inc. Specifications:          Approx 25 X 34" (63.5 X 86.5cm)        Stainless Steel Mesh With Reinforcing Bars.        Fits On...