Bellco Glass

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable....

Polypropylene Co-Polymer rack is lightweight, stackable and autoclavable. Rack comes flat and is folded and snapped into place for use. Rack remains collapsible for flat storage when not in use and measures 246 x 104 x 64 mm when assembled. Lightweight, stackable, and autoclavable. Collapsible to...

DeLong culture flask without closure Stainless steel or kap-uts disposable closures purchased seperately Borosilicate glass Type 1, Class A Graduated to approximate volumes

Excellent for Culture Tube and Flask Closures. 305 Stainless Steel, Non-Corroding. Lanced fingers grip firmly after repeated autoclaving.

Manufactured from Type 1, Class A, Borosilicate and ideal for all culture and media preparation/storage purposes Supplied with GL45 blue polypropylene linerless screw caps and pouring rings and graduated to approximate volumes

Heating circulator +20…+100 °C; 1 kW heater; 27L plastic tank

Stainless steal Thermowell holds liquid and RTD temperature sensor for recording internal bioreactor temperature. Signal is read by temperature controller and heating blanket temperature increases and decreases as required to maintain temperature setting. Fits into 10mm port on 3L metric headplate....

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 13/16? (20.6mm) Tube Size: 18mm Spacing: 6x12 Holds 72 Tubes Dimensions: 10" X 5" X 3" Minimum Requirement: 5...

This vessel is suitable for all cell culture applications- insect, plant and bacterial. Reduced height vessels maximize incubator space. Specifications: Material: Type 1 Class A Borosilicate Glass 100mm Neck for Cap Assembly and Over Head Drive 45mm Vertical Sidearm accepts Port and Thermowell...

For use with 18mm screw necks, 13-18mm Culture Tubes, 18-25mm Culture Tubes, 38mm Culture Tubes, 25-50ml Erlenmeyer Flasks, 125-300ml Erlenmeyer Flasks, 500-1000ml Erlenmeyer Flasks, 25-125ml DeLong Flasks and 250-6000ml DeLong Flasks. Sealed-in Silic

These beakers are useful for general laboratory procedures and are autoclaveable. They have blue graduations to aid in viewing and dispensing liquids. Specifications: Material: Polypropylene Size: 25ml Dimensions: 31x47mm Case Quantity: 12  

Power Cord,6'  Connects individual controller module to 115V wall outlet. Bellco Glass's Power Cord is a 6-foot cable designed to provide a reliable connection for laboratory devices. This cord ensures a stable power supply, which is crucial for uninterrupted experimental operations. Its...

Heating circulator +20…+200 °C; 2 kW heater; 12L SS tank w lid, drain valve

Refrigerated/heating circulator -40…+150 °C; 900W cooling @ 20 °C; 1 kW heater

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type...

DeLong culture flask without closure Stainless steel or kap-uts disposable closures purchased seperately Borosilicate glass Type 1, Class A Graduated to approximate volumes

Manufactured from Type 1 Class A Borosilicate Glass. Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. No stainless steel closure included. Specifications: Material: Type 1 Class A Borosilicate Glass Dimensions:...

Open top caps are ideal for applications requiring addition/withdrawal of vessel contents. Autoclavable to 140ºC.

Manufactured from Type 1 Class A Borosilicate Glass with a low coefficient of expansion. Heavy wall beakers meet astime-960 type 1 specifications for classification design capacity and markings. features a easy pour spout, white permanent graduations and a large marking square. Specifications: Type...

Glass Media Storage Bottle for the storage of liquids or cell culture media. Specifications: Type 1 Class A Borosilicate Glass Size: 5L Dimensions: 186x355mm Case Quantity: 1 Includes: 45mm Polypropylene Blue Screw Cap And Pouring Ring  

Type 1 Class A Borosilicate Glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. Specifications: Size: 100mL Dimensions: 56mm X 100mm Neck OD: 19.7-20.2mm 13.3-13.6mm Supply...

Manufactured from Type 1 Class A Borosilicate glass. Specifications: Capacity: 80ml Dimensions: 55mm Wide X 135mm Long X 30mm Deep Dam In Bottle,, 25mm From Bottom Neck Size; 25mm Material: Type 1 Class A Borosilicate Glass Supply With 25mm Screw Cap(2535-00025)& Stopper (2048-11800)

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 1/16? (26.9mm) Tube Size: 25mm Spacing: 4x10 Holds 40 Tubes Dimensions: 11 1/2" X 4 3/4" X 2 3/8" Minimum...

The Anaerobic Culture Bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45 GL screw cap with silicone o-ring and blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum...