Ace Glass

All-PTFE turbine type agitator. Unique locking arrangement assures positive grip. Agitator fits 10 mm shafts. Shaft opening is drilled straight thru to allow positioning of agitator at any drilled position on shaft as well as the bottom. For use with bead type glass shafts, 8068-G, 8075 or PTFE...

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

Round bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.

Imhoff sedimentation cone for the determination of settleable matter in water. Either blunt tip or Ace-Thred tip for environmental applications. Graduated from 0-2ml in 0.1ml divisions, 2-10ml in 0.5ml divisions, 10-40ml in 1ml divisions, 40-100ml in 2ml divisions.

PTFE agitator with removable blade secured with a PTFE pin. Supplied 76mm long blade will fit through a 29/42 joint. Fits 10mm OD drilled type or beaded type 8068, 8071 and 8075 shafts.

Pear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap

The Ace Glass septa is made from strong glass that provides added durability. septa is used mainly for minimizing pain and inflammation in the injured areas while performing surgical procedures.

Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.

Medium pressure, quartz, mercury-vapor lamp. For use in all listed immersion wells. 61cm PTFE covered lead wires, fitted with pin type connectors and 6' cord for connecting to power supply, permit lowering lamp into well for vertical operation. Of total energy radiated, approximately 40-48% is in...

Manufactured by Ace Glass, these full-length PTFE stoppers offer superior sealing and chemical resistance for a wide array of laboratory applications. Crafted from high-quality Polytetrafluoroethylene, these stoppers exhibit exceptional durability and a high melting point, ensuring reliable use in...

Ace Glass Truebore Precision Glass Tubing is designed for applications requiring exacting tolerance and consistency. This tubing is crafted to ensure uniform bore size throughout its length, making it ideal for specialized laboratory setups. Its precision manufacturing process guarantees that it...

Lab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole...

This easy-to-apply plastic coating forms a protective film around the outside of a glass component. It will normally contain both the glass particles and the materials inside the vessel should the glass vessel break during an experiment. This is a hard, adherent film and is resistant to leaching and...

Consists of Body with Ace-Thred, adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach...

Round bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.

This electrically insulated 25 gauge nichrome wire can be wound closed or open spaced. Max.temp 594 degreeC. The wire is approx. 1mm in diameter and has a resistivity of 2.1ohms/foot at 20 degree C; maximum ampere rating in open air at 594 degreeC is 3.7amps. The amperes are derated when enclosed...

A high velocity impinger air sampling which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is...

European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n

A superior, low melting, silicone base lubricant which liquefies at body temperature. Because of its composition, you need apply only a very thin film of Stir-Lube® to a stirring shaft to increase bearing and shaft life at least three times over that of a bearing lubricated with glycerine....

Borosilicate glass bottles with tooled neck to accept a #6 Rubber stopper. Bottles are epoxy coated to help prevent scratching. Bottles and stoppers sold separately. Working capacity is 1/2 actual capacity. Rated at 60 psi @ 20°C.

Double jacketed with standard taper inner and outer joint at bottom and top.

Used as a one-time opening valve. Drawn to a point so that a small weight will fracture the seal. The Ace Glass Tube with a break seal is designed for controlled release applications in the laboratory. Its break seal feature allows for precise, timed release of contents, making it suitable for...

With standard taper 24/40 joint and 8mm O.D. outlet tube bent at 75 degree angle. Ideal for precision distillation needs in a laboratory environment, this distilling adapter is meticulously designed with a 75-degree 8mm O.D. outlet tube. Made from high-quality glass, it ensures durability and...

Process pipe annealed u bend. This U Bend Process Pipe is a valuable piece of equipment for any laboratory involved in distillation or fluid transfer processes. Constructed from high-quality glass, it ensures durability and resistance to chemical reactions, providing a secure and leak-free...