Ace Glass

Unique impinger designed to be more economical when connecting in series eliminates need for connecting tubes.The 12/5 joints are perpendicular and come directly off bottle 180 degree apart. Screw cap on bottle has PTFE liner. Each bottle has one ball and one socket joint. Capacity 25mL. Bottle is...

Polished glass stirring shafts, 19mm OD. Available in solid and hollow styles and in various lengths. Join 8085 blades to button type shafts, Join 8091,8092,8093 and 8100 agitators to either knob or drilled style shafts. Join all shafts to stirrer motor using 8124 series chucks. Recommended for use...

Precision Trubore Stirrer Assembly consisting of 10 mm ID bearing, bushing, precision ground, button type glass shaft and blade. Available with either glass or PTFE stir blade.

Suitable for ASTM D 95 and E 123. Subdivided 0.1mL to 2.0mL and 0.2mL above 2mL. The Ace Glass Moisture Test Receiver, Dean & Stark, is designed for accurate moisture determination in various samples. Its precision design ensures reliable separation and measurement of water content. The receiver is...

Spherical ball, precision ground, with groove for O-Ring, for use with matching socket members. Leak proof at high vacuums when clamped. O-Ring permits use without grease. Supplied with one FETFE O-Ring. For replacement O-Rings, see 7855. See 7669 or 7670 for clamps.

Ace Safe threaded tubing connectors used to connect flexible tubing to #7,#11 or #15 Ace-Threds. Allows for easier connect-disconnect of tubing. A much safer design than glass hose barbs. All PTFE construction for lower extractables and higher temperature capability than the standard...

Precision ground, hollow, 5mm glass stirring shaft. Button type shaft accepts 9542 blades and can be used in matching 9524 and 9527 bearings. Holes are provided in the side of the shaft for material introduction and at the bottom for emission into the flask contents. Join to stirrer motor using 8124...

Used for pouring liquids or powders into multineck flasks. Available with standard taper joint. The Ace Glass Offset Powder Funnel is specifically crafted for the accurate transfer of powdered substances. Its offset design facilitates smooth flow and minimizes spillage during transfers. Constructed...

Transition adapter to convert a sanitary flanged apparatus 2 to a standard taper inner joint. Made of virgin PTFE.

Dual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head

Large receiver/evaporator flasks for use with Heidolph 20L rotary evaporators. Flasks are fabricated from blanks selected for balance and quality with carefully welded necks to provent "rotational whip". Receiver flask has a polished 40/25 joint, side neck is a GL-18 thread with solid cap. Bottom of...

Vacuum jacketed and silvered with observation stripe. Also available unsilvered. With an enlarged bulb knockdown section that removes high boiling ends without choking. Length of packing section is 100 or 200mm, I.D. approximately 10mm. With indents to

Extractor body only, with stopcock for withdrawing samples from extraction chamber. Can be used interchangeably with the standard Soxhlet extraction apparatus.

Tubing connector, used to connect flexible tubing (1/4", 3/8", 1/2", 3/4", 1"ID) to #7, #11, #15 or #25 Ace-Thred for easy, safe connect/disconnect. 5029/7506 Nylon bushing slides over serrated end and secures PP connector in thread with silicone O-Rin

Round bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced...

Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.

For reaction flasks, can be used with either cylindrical or spherical type. With 14/35 joint. Length measurement (A) is distance below joint to bottom of tube.

PTFE oval stir blades for 10mm OD button type stir shafts. 10mm OD shafts can be found in our 8068, 8070, 8074 and 8075 series.

For variable reflux ratio, can be used for operation under vacuum and receiver can be removed without disturbing the system's vacuum. 10/30 thermometer joint takes 76mm immersion thermometer listed under 8315. Side arm joint is 24/40. Stopcock bores are 2 mm.

Enhance your laboratory procedures with the robust and reliable Round Bottom, Single Neck, Beaded Tube Well Flask from Ace Glass. This flask boasts a design tailored for versatile application in distillation and heating processes. Its integrated beaded tube well allows for the precise placement of...

PTFE stirring blades for use with our button type 9524 and 9527 stirring shafts. Blades are 41mm wide x 12mm high and are designed for use in flasks 250ml and less. Match blade to shaft OD.

Bubbler with metering valve for precise control of inert gas introduction and features 9mm OD tube-end side arms for use with 3/8in ID vacuum tubing.

Protective netting only, for 8648 bottles. The Protective Netting by Ace Glass offers a practical solution for safeguarding delicate laboratory glassware. Made from durable materials, this netting provides an extra layer of protection against scratches and breaks during handling and storage. It is...

Unground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.