Ace Glass

Adapter with #7 Ace-Thred and inner or ball joint. Used for probes, thermometers, electrodes, etc.

Similar to Congealing Temperature apparatus described in U.S.Pharmacopeia, 1995, pages 1780, except this apparatus is supplied with Ace-Threds in place of rubber stoppers, where practical. #50 thread at center holds a test tube with a #25 bushing, open top test tube utilizes a rubber stopper to...

Rugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea

Complete, one-piece, plain flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and has...

Alginates assay distillation system similar to the one described in US Pharmacopeia 2006, chapter 311. The system includes a metering valve with flow meter tube set, 250mL flask and mantle, reflux condenser with u-tube and hose connection adapters and a 250mL gas washing bottle. 5/16 in ID Vinyl...

Glass stir blades for 10mm OD button type stir shafts. 10mm OD stir shafts can be found in our 8068, 8070, 8074 and 8075 series.

Buchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.

Type K temperature probes provide economical measurement from -20 degrees C to 550 degrees C with more corrosion resistance than J type probes. Type T probes are commonly used for temperature ranges from -200 degrees C to 200 degrees C. Probes available with an inconel sheath or insulated wire. Code...

Made from quartz. Used as reaction or sample tube in 7891 Turntable Reactor.

Glass bearing design for use with Ace-Thred pressure reactors and our 8075 glass, polished or 8074 bare, stainless steel 10mm stirring shafts. Both the top bushing and bottom coupling are PTFE. Maximum operating speed is 600 rpm.

A special well fabricated from glass that is worked to a very thin wall for better heat transfer. Fabricated in two sizes for either 25mm or 76mm immersion, length of tube being measured from the bottom of the ground joint.

Used for volatile fatty acid test; ASTM D-1076. Fabricated from standard wall tubing throughout. Hose connections on still are size D; on condenser, size C.

Connecting adapter with top female and bottom male standard taper joints.

Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction heads, see 6528, 6529 or 6530. For...

Adapter with bent hose connection top and either a standard taper or ball joint inner bottom. Codes -110,-112,-114 have an integral porosity A fritted disc.

Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.

Steel cabinet for safe operation of Photochemical Reaction Equipment. Cabinet has welded seams, fully hinged door with lip to prevent light from escaping. Door has key lock and controls a safety switch that prevents lamp operation unless door is closed. Sealed floor to 1" height to contain any...

Chromatographic column with integral reservoir and #15 Ace-Thred at top, and 2mm bore 1:5 taper PTFE plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring, and 5853-07 Tubing Connector for connecting 12.5 to 14mm O.D....

Borosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,...

Highly efficient, all glass, tapered tissue grinder combining two grinding surfaces on a single pestle and tube. The conical area is for initial grinding and the cylindrical area for final homogenization. Interchangeably ground to 0.1 - 0.15mm clearanc

Thermometer designed for our Microscale spinning band Hickman-Hinkle column. Organic liquid filled with a yellow backing. Each thermometer is serialized and includes a Statement of Accuracy indicating traceability to NIST standards. 8 inch length with a 50mm immersion. Order code -40 retaining ring...

Microscale Hickman-Hinkle Still Head, Spinning Column. Still head, available with/without side port, is used to carry out simple & fractional distillations. Head has an elongated section below well to accommodate a PTFE spinning band for yields of 6-10 theoretical plates. Still has top 14/10...

Ultra-Vacuum stirrer bearing for applications up to 0.6 Torr. Non-shedding bearing is manufactured from PTFE, Rulon and PEEK materials. Equally good in both vacuum and pressure applications as low as 0.6 Torr. Rated for up to 400 rpm with both glass (polished rather than precision ground is best)...

For fine dispersion. Porous tip approximately 5mm or 7mm O.D. x 10mm. 7mm O.D. Tube fits #7 Ace-Thred. Offered with Porosity A (145-174 micron), Porosity B (70-100 micron), Porosity C (25-50 micron), Porosity D (10-20 micron), or Porosity E (4-8 micron