Lab Tube Connectors & Adapters
Sealing caps stand out in this category for their ability to provide leak-proof closures, which are essential in preserving sample purity and preventing contamination. Compression fittings are excellent at offering robust and reliable connections that withstand the rigors of lab operations. These fittings are especially valuable in high-pressure applications, ensuring safety and consistency in results.
Tubing couplings and connectors further improve lab setups by facilitating quick and efficient tube connections. Their versatility makes them suitable for various laboratory configurations, including Y-tubing setups in chromatography.
These connectors and adapters, integral to lab tubing systems, significantly contribute to the accuracy and efficiency of laboratory procedures. Explore our lab tube connectors and adapters to discover how these small yet vital components can streamline your lab workflows and enhance experimental outcomes.
-
Scienceware® Complete Fitting Assortment
SP Bel-ArtStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy to find what you need Includes commonly used sizes of connector and…
-
This wafer is used in TSCD-II sterile tubing welder. Cross-contact or contamination is avoided because each wafer is discarded after a single use Heated up to 300 °C temperature high enough to maintain sterility during cutting and welding without allowing particulates or chemical residues…
-
Safe-Lab® Joint Tubing Adapters
SP Bel-ArtThe polypropylene screw cap has a Viton® O-ring that allows the position of glass tubing to be adjusted as required. An O-ring on the taper provides best sealing and the threaded polypropylene extracting nut ensures effortless removal. NOT autoclavable Safely and securely positions glass tubing…
-
Fittings for very high pressure applications PK material enables the use of capillary tubing in UHPLC Quick component replacement with minimal down time 10-32 coned configuration Requires 8.0 in-lb (0.90 N-m) of torque For 1/16" OD tubing The most demanding HPLC applications…
-
Low-Pressure Tee Assemblies
IDEX Health & ScienceUse Tee connectors in a variety of low-pressure situations throughout your fluidic system. Handy mounting holes make it a snap to mount connectors. Tee connector assemblies come complete with nuts and ferrules.
-
LeSiever® Dual Layers PES Hydrophilic Capsule Filter
LePure-BiotechThe LeSiever product is a high-quality filtration solution for biopharma applications. It features a hydrophilic polyethersulfone (PES) membrane for excellent flow rate and chemical compatibility. With built-in vent and drain valves, it simplifies filter changes and ensures reliability, reducing…
-
Quick Connect Threaded Male Luer Adapters
IDEX Health & ScienceMake solid connections in low-pressure applications Manufactured from inert polymers Ensure chemical compatibility with the fluid passing through A wide variety of options available
-
T-Shape Polypropylene Tubing Connectors
Thermo Scientific NalgeneWith ringed arms for attachment of tubing Autoclavable
-
Threaded End (UTS) Adapters
Cadence SciencePlated Brass or 316 Stainless Steel Meets ISO 594 Specifications Final assembly water tested at 45 PSI For industrial use only.
-
Tubing
HamiltonSlip plastic tubing over the end of the connector to quickly adapt the tube to a 1/4-28 connection.
-
Scienceware® Quick Connectors
SP Bel-ArtFits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…
-
Non-Return Valves
BürkleRetaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses. Resistant to compression max. 4 bar Operating temperature +0 to +40°C With PP valve ball, on request also with ball made of stainless steel or PTFE
-
-
Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system. Free technical application support available to determine which connector type is needed for…
-
Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system Free technical application support available to determine which connector type is needed for…
-
Scienceware® 28-Piece Fittings Kit
SP Bel-ArtCompatible with tubing from 3.2 to 12.7mm (? to ½"), these fittings are for the most common lab connections. Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA grade Kit contains: 6 Straight…
-
Connect to a male coupling insert to stop the flow. Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Audible “click” provides added assurance of a secure connection. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with…
-
PTFE Thermometer Adapters with Compression Cap
SP Wilmad-LabGlassThese PTFE inner joint adapters have a threaded compression cap, four saddle O-rings and one Viton® O-ring for use with plain stem thermometers and inlet tubes. Accepts thermometers with O.D.'s from 3 to 7mm.
-
Technical Features: Fits 1/2 inch ID Tubing (0.5 inch, 12.7 mm)
-
Weld to single-use bags to transfer viscose fluids and powders. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system Free technical application support available to determine which connector type is needed for your application.…
-
-
Side Load Pinch Clamp, White
QosinaTechnical features of side load clamp for feeding tube [clamp G tube]: Fits 0.197 inch - 0.284 inch OD Tubing pinch clamps (5 mm - 7.2 mm)
-
Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system. Free technical application support available to determine which connector type is needed for…
-
For 10-32 coned port Natural PEEK construction Use the plugs to close off unused ports in valves and multiport connectors. Select coned plugs for high-pressure applications; flat-bottom plugs for low-pressure applications. Color-coded plugs are ideal for easily identifying stored columns…
-
PFA Compression nut, PTFE ferrule and ETFE gripping ring for CG-1975 series compression fittings.
-
Universal Inlet Adapters with Screw Cap
SP Wilmad-LabGlassBorosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…
-
Y-Shaped Connectors
United Scientific SuppliesPolypropylene Y-shaped connectors with serrated ends are ideal for leak-proof tubing connections. Autoclavable.
-
Y-Connectors
BürkleCylindrical Y hose connector to connect hoses. PVDF , Temperature resistant up to +160°C max., highly resistant to chemicals PP , Temperature resistant up to +135°C max. Sterilisable
-
-
Tubing Connector Kit
DynalonProduct Dimensions (l x w x h) : 11x6.75x2.5in Tubing Connector Kit consists of a 55-piece assortment of connectors and clamps needed in daily lab routines or for industrial application. Supplied in handy plastic compartment tray. Kit includes: 14 Y connectors, 2 each size; 12 quick…
-
Quick Couplings for Plastic Tubing
Konstance PneumaticsLeak-free for semi-rigid or flexible tubing 1/16” to 3/8” id Reliable leak free plastic tubing connections Adds convenience to any fluid or gas handling system Simple one-hand operation Valve or straight through flow Use standard Delrin® acetal for mild…
-
Connectors, Polypropylene T
Dynalon"T" Tubing Connectors. Polypropylene . Excellent chemical resistance, autoclavable polypropylene, serrated connecting surfaces to prevent tubing slipping, withstands flows to 20 p.s.i.