Ptfe Ferrule

Compare Tool

Select up to 3 products

Ptfe Ferrule
1 - 32 of 58
Sort
View
Show
  • PTFE Ferrule

    PerkinElmer

    Note: New ferrules are required when trap is changed.

  • PTFE Ferrules

    Restek

    Upper temperature limit 250°C 100% PTFE; completely inert One-piece design requires no back ferrule

  • Ferrules, PTFE

    Ace Glass

    …No. 1165H91 Ferrule, PTFE, 1/8inid hole, use with #7 Ace-Thred, pk12 Thomas No. 1165H92 Ferrule, PTFE, 3/16inID hole, use with #7 Ace-Thred, pk/12 Thomas No. 1165H93 Ferrule, PTFE, 1/4inid hole, use with #7 Ace-Thred, pk12 Thomas No. 1165H94 Ferrule, PTFE, 3/8inid hole,…

  • Ferrules, PTFE 1/8"

    Agilent Technologies

  • Inlet Ferrules, 100% PTFE

    Chromatography Research Supplies

    …of ferrules made from PTFE, Graphite, Vespel® and Vespel/Graphite composites. Ferrule sizes refer to the size of the fittings into which they fit; they are not the diameter of the ferrule. (For example, 1/16" ferrules are 1/8" diameter.) Please Note for all Ferrules:

  • PFA PTFE Ferrules for Storage End Caps and for ATD Mobile Seal

    PerkinElmer

    PFA PTFE Ferrules for Storage End Caps and for ATD Mobile Seal

  • GC PTFE Ferrules For use with brass long term storage caps (09908851) on TD…

    PerkinElmer

    For use with 14 in Brass Long-Term StorageCaps (09908851), two required per tube.

  • Omnifit® PTFE Cones (Ferrules) for Cap System Fittings and Valves

    Diba

    Select the size you need for a leaktight seal Select PTFE cones when chemical resistance is important. The OD of the tubing should be matched to the inside diameter of the cone.

  • Graphite Ferrule

    PerkinElmer

    Ferrule for cold trap. Recommended for all applications except those using Mass Spec or ECD (Use P/N L4275110 PTFE Ferrule).

  • Brass Storage End Caps and Ferrule Set Kit For TD Tubes

    PerkinElmer

    Kit contains 20pcs each of Brass caps and PTFE ferrules for long-term storage of Thermal Desorber Tubes.

  • Bushing, Nylon or PTFE

    Ace Glass

    Nylon or PTFE bushings for use with any #7 Ace-Thred. Solid bushings are not stoppers (see 5803,5846) but are intended for drilling custom diameter holes. Ferrule designed bushings can be used with either 11710-03 PTFE ferrule for 1/8 inch OD tubes, code -05 for 3/16 inch OD tubes or code -07 for…

  • Compression Nuts, Ferrules and Grip Rings

    Chemglass

    PFA Compression nut, PTFE ferrule and ETFE gripping ring for CG-1975 series compression fittings.

  • PTFE Stopcock Valve, 2 Way

    Ace Glass

    PTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE. Compression ferrules made of virgin PTFE.

  • Brass Long-Term Storage Caps

    PerkinElmer

    Recommended for long term storage. Two required per tube, also requires PTFE ferrule p/n 04964467

  • Adapter, Thermocouple

    Ace Glass

    Ace-Thred to standard taper adapter designed specifically for securing a thermocouple via a nylon bushing and PTFE ferrule.

  • Supeltex® M-1 Packed Column Ferrules

    MilliporeSigma

    Characteristics: Ideal for connection to mass spectrometers. High reusability. Isothermal use only. Material Composition: Ceramic-filled PTFE Maximum Temperature: 250°C

  • Dibafit™ Type P Ferrules for Flat-Bottom 1/4"-28 UNF(M) and M6 ISO(M) Fittings

    Diba

    …tubing Rated for pressures up to 1000 psi (69 bar) Use with flat-bottom 1/4"-28 UNF(M) or M6 ISO(M) fittings Type P system uses a one-piece ferrule with only the inner PTFE sealing face in the fluid path. Select from PTFE/SS or PTFE/PEEK™ material of construction.

  • Adapters, PTFE, Universal, Inlet

    Chemglass

    …entirely of PTFE and is supplied complete with a series of 5 all PTFE ferrule style cones. These cones have inside diameters that run from 3.5 to 6.5mm and seal against the inserted tube by means of a threaded compression screw. Cones are color coded for easy identification. Replacement PTFE cones…

  • Stainless Steel Unions

    SGE

    Low dead volume High temperature applications No back ferrules needed Can be used with Graphite, Graphite Vespel® or PTFE ferrules Suitable for glass, fused silica, metal, plastic or glass lined tubing Non-swaging and no tube distortion

  • RxnHub Syringe Pump Tubing Kits

    Chemglass

    PTFE TUBING, ETFE NUT AND ETFE FERRULE KITS FOR RXNHUB PROGRAMMABLE SYRINGE PUMPS

  • Distillation Apparatus, Cyanide

    Ace Glass

    …and insoluble cyanides in water. Apparatus basically conforms to ASTM D-2036 except for modifications involving Ace-Threds and larger joints. Also available with threaded adapter to connect still head to trap. PTFE ferrules are supplied in place of FETFE O-Rings for threaded compression fittings.

  • Inlet Ferrules, High Purity Graphite

    Chromatography Research Supplies

    …of ferrules made from PTFE, Graphite, Vespel® and Vespel/Graphite composites. Ferrule sizes refer to the size of the fittings into which they fit; they are not the diameter of the ferrule. (For example, 1/16" ferrules are 1/8" diameter.) Please Note for all Ferrules:

  • Mini-Can Accessories

    Restek

    …area sampling Personal Sample Inlet: 3' long x 1/16" OD all PTFE tubing Convenient clip can be moved along length of tubing for proper attachment in breathing zone PTFE reducing ferrule allows direct connection from 1/16" tubing to 1/4" flow controller without…

  • Low-Pressure CPI Inlet Filter for Mobile Phase Reservoir

    Restek

    A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to 1/8" OD PTFE tubing when finger-tightened onto the precision-machined filter holder. The filter element is replaceable. Standard 10 µm porosity protects delicate pump components from particles but introduces very little…

  • Autosampler Syringes

    Agilent Technologies

    …heat above 50°C. Removable needle syringe: This needle style allows use of various point styles. The threaded hub connection and PTFE sealing ferrule can be tightened to compensate for wear. Tapered Needle, 23-26s Gauge One needle provides the benefits of two. The upper portion…

  • PFA In-Line Filter Holder

    Cole-Parmer

    … Change filter without disconnecting tubing with Tefzel® ETFE clamp nut. Prefiltering reservoir creates fluid turbulence to slow membrane clogging. PFA support grid snaps out easily for cleaning. Ferruled nuts accept 1/4'' OD PTFE or PFA tubing. Order filter membranes separately.

  • TurboMatrix Thermal Desorber Starter Kit

    PerkinElmer

    …Steel Sample Tubes - Pkg.10 (P/N M0413595), Glass Sample Tube - Pkg.10 (P/N M0413598), Five Large PTFE Filter Discs (P/N L1003029), Five PTFE Filter Discs (P/N L1003030), Two Graphite Ferrules (P/N L4271187), Two Trap Tube Nuts (P/N L4275009), Trap Tube (P/N M0410094), Ten Viton 009 O-Rings…

  • PharmaFluor® Compression Fittings

    Saint Gobain

    … Handles temperatures up to 212°F (100°C) Quality inspected to ensure reliability Ideal in any laboratory fluid-handling or transfer setup Compatible with corrosive and ultra-pure fluids Materials of Construction Body: high-purity PFA Gripper: PVDF Ferrule: PTFE Nut: ETFE

  • GC Start UP Kit 1/8 Lines Copper Tubing and Fitting for (3) Gases

    PerkinElmer

    …x 1/4"""" fnpt Brass- 3 Adjustable Safety Relief Valve Brass 50 - 150 PSI- 3 1/4"""" fnpt x 1/8"""" Comp Fitting Brass- 3 1/8"""" Port Connector Brass- 3 1/8"""" Ferrule Brass- 3 1/8"""" Compression Brass Nut- 3 1/8"""" Compression Brass Fitting Cap- 3 Tubing Cutter 1/8"""" Tubing- 1 PTFE Tape- 1

  • VapLock™ Adapters for Semi-Rigid Tubing, NPT(M)

    Cole-Parmer

    …color-coded by tubing size for easy identification. Each connection is comprised of a two-piece nut and ferrule system with polypropylene NPT(M) thread adapter. Wrap NPT thread 3 to 4 times with PTFE tape and wrench tighten for a leak-resistant connection. Adapters withstand pressures up to 500 psi.

  • Adapters, 24/40, Sampling

    Chemglass

    …Nuts, (3) CG-1164-F-02 ferrules and (2) CG-1166-10 solid plugs. Sampling valve is also supplied complete with nuts and ferrules. See CG-1037-16 for pierceable silicone septa. Complete adapter is supplied with 90° valve, 3-port 24/40 PTFE Adapter and 10ft of 1/8” OD PTFE tubing.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.