GC Instruments, Parts and Supplies

Compare Tool

Select up to 3 products

HomeAll Products

GC Instruments, Parts and Supplies

1 - 32 of 1048
Sort
View
Show
  • AIR SAMPLING PUMP 120 V

  • Bench-top vial crimper without jaws. Requires jaws to work (sold separately).

  • Battery: LiFePO4 6. 4 Volt Rated 1500 Charge Cycles Tested to EN62133 and UN DOT Very low self-discharge Direct plug connection to board PTC’s integral to battery Crimper can operate while battery is charging. Motor: Stall torque 1400 g cm. Control Buttons: Top-mounted keypad…

  • Kit contains 20pcs each of Brass caps and PTFE ferrules for long-term storage of Thermal Desorber Tubes.

  • PerkinElmer’s FlowMark ™ flowmeter is specifically designed for use with gas chromatography (GC) instruments. The probe is applied directly to the gas flow stream and the measured flow rate is presented on the LCD screen. Units of flow are measured in mL/min. This unit provides continuous…

  • Decapper Jaw set for the High Performance Crimper. It fits standard 20 mm caps, is suitable for all steel and magnetic caps, and a wide range of seal thicknesses.

  • Two- and three-stage glass soap bubble gas flow meters, for Gas Chromatography.

  • The Carbopack B is conditional at 350 °C. PerkinElmer recommends a maximum temperature of 400 °C for this sample tube with a desorption temperature of 330 °C. The tubes approximate analyte volatility range is n-C5 to n-C12 and the typical analytes for the Carbopack B are a wide range of VOCs. The…

  • PerkinElmer now offers a hand crimper and decapper developed with the user in mind. This robust and easy to use tool is ideal for consistent crimping and decapping of 11mm and 20mm caps - a must have for every lab!

  • The FPD is a highly sensitive and selective detector for bothsulfur and phosphorus compounds. It is especially suitable forenvironmental monitoring of H2S and sulfur gases ingeneral and for organophosphorus compounds present at trace levelsin pesticide analysis. Alkyl tin compounds can also be…

  • This kit contains: 5mL x 0. 63mm outer diameter syringe 2mL clear sample vials (144) 2mL amber sample vials (100) blue crimp caps with septa (100) green crimp caps with septa (100) red crimp caps with septa (100) septa for waste/wash vials (100) crimper - 11mm decapper - 11 mm …

  • We now offer a hand crimper and decapper developed with the user in mind. This robust and easy to use tool is ideal for consistant crimping and decapping of 11mm and 20mm caps - a must have for every lab!

  • Crimper Jaw set for the High Performance Crimper. It fits standard 20 mm caps and seals, is suitable for all steel and magnetic caps, and a wide range of seal thicknesses.

  • Fritless Sparger: Compared to a frit sparger, the fritless sparger may be the better choice when a water sample has a tendency to foam. This sparger is not appropriate for soil samples, which tend to clog the capillary tube. Available in 1/2 and 3/4 in. mount sizes. Disposable (Needle) Tubes:…

  • Thermogreen ® Injector Septa, extremely low bleed over a wide range of inlet temperatures -100 to 350 °C. Easier needle penetration and high puncture tolerance make this septum ideal for autosamplers. This septum is already conditioned and ready to use.

  • PerkinElmer now offers a hand crimper and decapper developed with the user in mind. This robust and easy to use tool is ideal for consistent crimping and decapping of 11 mm and 20 mm caps - a must have for every lab!

  • Brass Male Compression Fitting, 1/8 NPT, 1/4 in. Tubing

  • Capillary Inlet Supplies Kit

    Agilent Technologies

    Kit Includes: Gold plated seal kit, includes washer Replacement for 18740-20885, 3 each Liner, split, straight, glass wool, non-deactivated, 4 each Liner, splitless, single-taper, glass wool, deactivated, 2 each Non-Stick Fluorocarbon O-ring, 10/pk Liner, direct, 2mm ID,…

  • The Advanced Green septum was created to combine significantlylonger injection life, low bleed and low injection port adhesion.The result is a general use green septum you can use for all yourcritical analyses. Advance Green septa are packaged in a plasticdial pack of 10 septa.

  • Female luer adapter to 1/16 ftgs

    Agilent Technologies

  • Flip Top Inlet Sealing System

    Agilent Technologies

    A faster, smarter way to change inlet liners on Agilent GC’s. Cuts liner replacement time to as little as 30 seconds Eliminates frustrating searches for special wrenches or tools Improves inlet ergonomics — no more handling of heated parts, no more burns or scrapes …

  • Sorbent: Soil Vapor Intrusion Our new multi-bed construction extends the hydrocarbon range past naphthalene while retaining the lighter components, enabling larger sample volumes, hence, enhancing detection limits. Unique design that meets the challenges and criteria of the EPA regulations for air…

  • COMPRESSOR W/DRY AIR 115V 110L/MIN

  • PerkinElmer now offers a hand crimper and decapper developed with the user in mind. This robust and easy to use tool is ideal for consistent crimping and decapping of 11mm and 20mm caps - a must have for every lab!

  • The new PerkinElmer compact handheld electronic gas leak detector is the ideal solution for detecting gas leaks in your Gas Chromatography systems. Leaks in your system waste gas and can cause detector noise, baseline instability, and shorter column life. This portable unit detects minute leaks of…

  • Flat Bottom Headspace Crimp Top Glass Vials Rounded Bottom Headspace Crimp Top Glass Vials Headspace Vials for G1888A Autosampler Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are…

  • High-Purity Brass Regulator (Single Stage), CGA-350, Use:He, Ar. PerkinElmer offers both single- and dual-stage regulators. All regulators are supplied with standard CGA fittings. We recommend that you consult your local gas supplier first to determine the proper tank regulator required. All…

  • PCOC 530um Septum Nut

    Agilent Technologies

  • Septa & Ferrules

    Agilent Technologies

    CrossLab Non-Stick Bleed Temperature Optimized (BTO) Inlet Septa Agilent's CrossLab Non-Stick Bleed Temperature Optimized (BTO) Inlet Septa ensure a reliable, leak-free and non-contaminating seal, and exclude air from the inlet.

  • Crimper Jaw set for the High Performance Crimper. It fits standard 11 mm caps and seals, is suitable for all steel and magnetic caps, and wide range of seal thicknesses.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.