Tubing Connector Kit

Compare Tool

Select up to 3 products

Tubing Connector Kit
1 - 32 of 37
Sort
View
Show
  • Tubing Connector Kit

    Dynalon

    Tubing Connector Kit consists of a 55-piece assortment of connectors and clamps needed in daily lab routines or for industrial application. Supplied in handy plastic compartment tray. Kit includes: 14 Y connectors, 2 each size; 12 quick disconnects, 2 each size; 12 straight connectors, 2 each…

  • Tricorn Columns

    GE Healthcare

    tube, adapter unit, end cap, filter kit, two stop plugs, two fingertight connectors, two M6 connectors, adapter lock, and filter holder. Packing Tricorn columns is simplified using Tricorn Packing Connector and the appropriate glass tube. Tricorn Packing Connector includes one packing connector and…

  • Consumables Kit for Agilent 7700x/e and 8000 Series ICP-MS

    Agilent Technologies

    …sample tubes, 0.5mm ID, 1.6mm OD, 5m (G1820-65105) Sample inlet tubing for MicroMist nebulizer Online internal standard addition kit (G3280-60590)  Drain tube assembly (G3280-60555) Spray chamber (G3280-80008) Spray chamber drain tubing (G1820-65515) Ball joint connector

  • Digital Microdispenser Accessories

    Drummond

    …bore tubing for connection to suitable reservoir Valve diaphragm is ethylene polypropylene rubber Kit includes 7691L60 Pall Valve; stainless steel inlet sinker; 760 mm length of 3/32” bore vinyl tubing; Luer pipet tip; one tubing clamp; seven polypropylene tubing connectors; and…

  • Scienceware® 28-Piece Fittings Kit

    Bel-Art Products

    …polyethylene and not autoclavable or FDA grade Kit contains: 6 Straight Tubing Connectors, 7 Stepped Tubing Connectors, 5 Wye (Y) Tubing Connectors, 3 "T" shaped Tubing Connectors, 5 Quick Disconnects and 2 flow control Plastic Tubing Clamps Plastic organizer box has room for adding…

  • MXT-Union Connector Kits for Connecting Metal and/or Fused Silica GC Columns

    Restek

    connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit

  • Hose/Tubing Clamp Assortment Kit

    Thomas®

    Can be gas or chemically sterilized 65 total pieces in 13 sizes One-piece, reusable clamp squeezes shut for a leakproof seal. Made of chemical/corrosion-resistant, rustproof nylon. Diameters range from 0.246 to 1.610 inches. Temperature range is 32 to 194°F/0 to 90°C.

  • HPLC PEEK Performance Kit

    Restek

    Kit is a useful complement to your HPLC system. Includes: Hub-Cap Adapter w/ Cap (1) Tubing Clips (3) Clean Cut Tubing Cutter (1) PEEK Finger Tight Fittings (5) PEEK Column Plugs (5) PEEK 90° Tubing Elbows (2) PEEK 180° Tubing Elbows (2) PEEK Column Connectors

  • Survival Kit for HPLC, PEEK

    Restek

    …PEEK Survival Kit is an invaluable parts kit that contains tubing, fittings, and tools essential for setting up and maintaining your HPLC system: PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool wrench, open-end wrenches, and more. Kit includes: …

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

  • MXT "Y"-Union Connector Kits for Connecting Metal and/or Fused Silica GC Columns

    Restek

    connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit

  • MXT Low Dead Volume Connector Kits for Metal Columns

    Restek

    …volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430°C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing. Each kit contains…

  • Vacuum Tubing Kit

    Labconco

    Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle valve to an accessory pump with 1/2" connector

  • MXT Low Dead Volume "Y" Connector Kits for Metal Columns

    Restek

    …low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430°C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing. Connect two…

  • Tube 19/22

    Corning

    …PYREX® 105° angle vacuum connecting adapters have a tubulation of 10mm O.D. for attaching to a vacuum pump and inner and outer 19/22 Standard Taper joints. Includes a drip-tip on the inner tube. These tubes are also replacement parts for organic chemistry kits (7177U65) and (0318V26)

  • Service Fixture Kit Yellow Vacuum

    Labconco

    …of 14.7 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Gray Argon

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Orange Air

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Black Steam

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Brown Nitrogen

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Blue Gas

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit White Di Water

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Red Hot Water

    Labconco

    …of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Light Green Oxygen

    Labconco

    …of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Service Fixture Kit Green Cold Water

    Labconco

    …pressure of 40 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Rinsing Kit for PerkinElmer AS-93/S10 plus/S10 Autosampler

    PerkinElmer

    Rinsing Kit for PerkinElmer AS-93 plus Autosampler, Kit includes: Rinsing port; Adapter M; Pump tube (2.79mm Inner Diameter, Pkg. 6), Tygon drain tube (2m), PVC rinse liquid feed tube (2m), and Connector. The vessel may not fit trays manufactured prior to 1996.

  • Talboys Support Rod and Clamp Kit

    Troemner

    Designed for holding temperature probes, thermometers or other glass tubes. Includes an 18" (45.7cm) aluminum support rod, thermometer/temperature probe extension clamp, 3-prong medium swivel clamp, and hook connector. Recommended for Professional, Advanced or Basic Hotplates or…

  • PFA Inert Sample Introduction Kits

    Agilent Technologies

    …consumables including PFA Inert Sample Introduction Kit Supplies. A full range of accessories are available including connector and drain tubes, injector assemblies and torches for 7500 and 7700 ICP-MS systems. All PFA Inert Sample Introduction Kit Supplies are designed to Agilent’s demanding…

  • Diaphragm Air Pump

    …induction-type motor Cast aluminum base and pump housing Free air capacity 3.6 Lpm and vacuum 12” Hg 120 V, 60 Hz; connectors take 1/4-inch i.d. tubing. Repair Kit (7893C09) provides full set of parts: diaphragm, Teflon ring, three metal screens and two rubber valve discs.

  • Nuts, Front and Back Ferrule Sets

    Agilent Technologies

    2713J65 connector is required for plumbing 1/4 in. tubing to regulators. Kit includes the following: Ten 1/8 in. nuts, brass Ten 1/4 in. nuts brass Ten 1/8 in. front ferrules, brass Ten 1/4 in. front ferrules, brass Ten 1/8 in. back ferrules, brass Ten 1/4…

  • Colony Counting Accessories

    Sartorius

    Accessories for Colony Counting

  • Cell Factories

    Thermo Scientific Nunc

    …radiation Individually wrapped Start-Up Kit (9383X10) This sterile kit contains everything needed to operate the cell factory including HDPE cell factory connector, caps, bacterial air vent, tubing and clamp. Tubing Connector, Elbow Type (9383X16) Polypropylene,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.