Thermo Scientific Nalgene

Compare Tool

Select up to 3 products

Sort
View
Show
  • Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology

    Thermo Scientific Nalgene

    Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

  • Unwire™ Half-Racks: Resmer™ Manufacturing Technology

    Thermo Scientific Nalgene

    Constructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…

  • 4-In-1 EZ Tote Bottle Carrier

    Thermo Scientific Nalgene

    Easily carry multiple bottles from the stockroom to the lab Easy to assemble, stores flat Versatile tote carries 500 ml, 1L or 4L bottles Strong, durable and lightweight plastic With a capacity of 28 pounds, this folding tote is perfect for safely and easily carrying bottles…

  • Unwire Polypropylene Test Tube Peg Racks

    Thermo Scientific Nalgene

    Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x 12. 9260B25…

  • Safety Bottle Carriers

    Thermo Scientific Nalgene

    Linear low-density polyethylene Safety yellow color Molded to hold bottles at both top and bottom, preventing any contact between them. Base has three sockets on either side and integral handle in the center. Top fits down over the handle and snap-locks at both ends of base. Sockets in top hold…

  • Cryogenic Vial Storage Boxes

    Thermo Scientific Nalgene

    For ultra-low temperature storage of 1.2 and 2.0 mL cryogenic vials Usable in a wide range of environments and temperatures (-196 to +121°C) Numerical grid system, which is molded into box with corresponding numbers printed on lid 25-place boxes are arranged in a 5 x 5 array and measure…

  • Microtube Storage Box

    Thermo Scientific Nalgene

    Bottom is of white polycarbonate with a permanent foam insert; lid is of clear polycarbonate Insert can accommodate up to fifty 1.5 mL microtubes. Usable temperature range -150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube…

  • Unwire Polypropylene Test Tube Racks with Handles

    Thermo Scientific Nalgene

    Non-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.

  • Nalgene Cryoboxes

    Thermo Scientific Nalgene

    Ultra-low temperture storage of internally and externally threaded vials White polycarbonate box usable from -196°C to +121°C Transparent lid with molded-in numbers and coded grid Holds 81, 5 mL size vials. Overall 133 x 133 x 95 mm high.

  • Unwire Half-Racks For 25 mm Test Tubes

    Thermo Scientific Nalgene

    Cannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…

  • High Density Polyethylene Safety Tray

    Thermo Scientific Nalgene

    Nalge 7131 White, shatter-resistant polyethylene carrier with removable foam inserts for accommodating 100 mL, 250 mL and 500 mL bottles; remove inserts to accommodate bottles and unwire test tube racks With molded-in handle For safely handling up to six 1 Liter glass or plastic…

  • Low Density Polyethylene Safety Type Bottle Carriers With Handle

    Thermo Scientific Nalgene

    Nalge 6501 For transport and storage of glass reagent bottle, 5-pint and 1-gallon capacity Neck and bottle cap are protected Clear polycarbonate lid allows for identification of bottle contents No need to remove bottle from carrier before pouring, Top twists off for removal from cover

  • Unwire Polypropylene Test Tube Racks

    Thermo Scientific Nalgene

    Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

  • Test Tube Rack Unwire™ Wht 13 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • Biotransport Test Tube Carrier

    Thermo Scientific Nalgene

    Designed for transportation of potentially hazardous materials in racks Constructed of clear polycarbonate with a silicone gasket Autoclavable Four polysulfone clamps securely lock the top and bottom together. Dimensions: 19” x 6” x 6” (495 x 165 x 170 mm). …

  • Unwire Half-Racks For 30 mm Test Tubes

    Thermo Scientific Nalgene

    Molded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…

  • Test Tube Slant Racks

    Thermo Scientific Nalgene

    Incubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…

  • Unwire Polycarbonate Test Tube Racks

    Thermo Scientific Nalgene

    Usable in cold rooms and at subfreezing temperatures Racks can be used in water baths, as they do not float Similar to 9259S10 series, but constructed of polycarbonate. Racks’ upper two shelves and handles are clear; the bottom shelf is opaque. Can be autoclaved occasionally, but repeated…

  • Latch Assy PC Nat

    Thermo Scientific Nalgene

    Closed-system carrier designed to protect the lab worker during transportation of Unwire test tube racks containing tubes or sample holders filled with potentially hazardous samples Tough and break-resistant Excellent visibility of contents Molded, easy-to-grasp side handles …

  • Polypropylene Utility Trays

    Thermo Scientific Nalgene

    Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

  • Petri Dish Rack Posts

    Thermo Scientific Nalgene

    Polycarbonate frame, white polycarbonate posts Petri dish rack can be decontaminated by heat sterilization Smooth, rounded corners, finger-grip handle and rubber feet make carrying up to 54 plastic-round dishes (100 x 15mm) or 42 glass-round dishes (100 x 15mm) safe and secure Simple…

  • Nalgene™ Locator™ Plus Racks for 81-Ampule Cryogenic Box

    Thermo Scientific Nalgene

    Take advantage of efficient, high-volume storage with Thermo Scientific™ Nalgene™ Locator™ Plus Racks for 81-Ampule Cryogenic Box. Designed for long-term storage Features an indexed frame and box organizational system Unique hanging rack promotes easy sample…

  • Round Floating Microtube Racks

    Thermo Scientific Nalgene

    For incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…

  • Polycarbonate Rack

    Thermo Scientific Nalgene

    Holds up to eight 250-500 mL bottles (bottles not included) Bottles held securely by bottom pan depression and upper grid Telescoping handle stays out of the way for convenient storage Rack will not tip over Autoclavable

  • Rack Microtube Square PP 1.5 ml

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Polypropylene Floating Microtube Racks are especially used in genetic cloning, microbiology and immunology labs. Offers excellent temperature resistance from -70° to +100°C (-94° to +212°F). Thaw, cool and incubate samples at elevated or reduced…

  • Test Tube Rack Unwire™ Wht 16 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • White Polycarbonate Cryogenic Vial Holders

    Thermo Scientific Nalgene

    Designed for maximum convenience and one-handed operation Bottom of each well interlocks with base of Nalgene cryogenic vial so that vial will not turn during opening and closing For positive vial identification numbers and letters are molded into each holder's upper surface. Designed to hold…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.