Thermo Scientific Nalgene

Compare Tool

Select up to 3 products

HomeAll Products

Thermo Scientific Nalgene

1 - 32 of 508
Sort
View
Show
  • An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking and features a spigot installed for draw off. Ideal for less rigorous applications. Available in sizes…

  • For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. Ideal for less rigorous applications, these linear, low-density polyethylene tanks offer excellent resistance to stress cracking. The cover…

  • Funnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…

  • Pipet Cleaning Equipment Sets

    Thermo Scientific Nalgene

    Acquire everything you need to clean pipets with the Thermo Scientific™ Nalgene™ Pipet Cleaning Equipment Sets. Each of these conveniently packaged sets features a basket, jar and washer. A larger size is available to accomodate up to 32" (81cm) long pipets. Features: …

  • Wide Mouth PMP Bottles

    Thermo Scientific Nalgene

    Carry out a wide array of applications with chemically-resistant Thermo Scientific™ Nalgene™ Wide Mouth PMP Bottles that easily withstand a temperature range from 20° to 175°C (68° to 347°F) and repeated autoclaving even at 150°C (302°F). Designed to…

  • Guaranteed to meet accuracy requirements of ASTM Class B, E 1272 and all requirements of ISO Standard 6706 Shatterproof - safer than glass No meniscus, so reading is easier Calibrated "to contain"/"to deliver" at 20°C Large blue base resists tipping All sizes…

  • Wide Mouth Unitary Wash Bottles

    Thermo Scientific Nalgene

    Design eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than…

  • Utility Carrier Tray

    Thermo Scientific Nalgene

    Nalgene® 7130 Of high-density polyethylene Divided lengthwise by fixed central partition with molded handle Dimensions shown are length x width x depth.

  • Narrow Mouth HDPE Bottles

    Thermo Scientific Nalgene

    Nalgene 2002 series With polypropylene screw cap Leakproof Walls are rigid and translucent Excellent chemical resistance Durable for long term use 4 mL bottles have a 13 mm closure size; 8, 30 and 60 mL bottles have a 20 mm closure size and also take standard serum stoppers;…

  • Improve rotor fit and performance using Thermo Scientific™ Nalgene™ High-Speed Round-Bottom PPCO Centrifuge Tubes, featuring uniform wall thickness and diameter. Tubes have excellent chemical resistance. Features Round bottoms that fit high-speed rotors in refrigerated or…

  • Torque Fittings, HDPE

    Thermo Scientific Nalgene

    Torque Wrench Fittings for HDPE Closures Epoxy Only for Nalgene Closures Assures accurate torque readings

  • Polycarbonate Faceshields

    Thermo Scientific Nalgene

    Wear the adjustable Thermo Scientific™ Nalgene™ Polycarbonate Faceshield over safety glasses. With an optically clear window made of 1/16" (1.5mm) thick polycarbonate, this faceshield provides impact protection as well as protection from UV light in the 200-360nm range. It is…

  • Bottle Narrow Mouth HDPE 500 ml

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Lab Quality Bottles are specifically designed for demanding lab use. Thermo Scientific Nalgene Lab Quality Narrow-Mouth bottles are all-purpose Boston round bottles that are highly reliable and durable for long-term use. Ideal for storing, shipping and…

  • Store, ship and package light-sensitive liquid using Thermo Scientific™ Nalgene™ Narrow Mouth Amber HDPE Lab Quality Bottles. Featuring excellent chemical resistance to most acids, bases and alcohols, these high density polyethylene bottles are guaranteed leakproof. Features: …

  • Thermo Scientific™ Nalgene High-Speed Round-Bottom Polypropylene Copolymer Tubes uniform wall thickness and diameter provides improved rotor fit and performance. Tubes have excellent chemical resistance. Designed with round bottoms to fit high speed rotors in refrigerated or…

  • CN Filter Units

    Thermo Scientific Nalgene

    Nalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…

  • Polyproylene Pneumatic Trough

    Thermo Scientific Nalgene

    Replace metal-type troughs with the lightweight, corrosion-proof and quiet Thermo Scientific™ Nalgene™ Polypropylene Pneumatic Trough. This trough features tapered sides for nesting and a built-in gas inlet. There are no sharp corners or separate parts to lose. The built-in platform…

  • Needle Spigot LDPE 1/2 Inch

    Thermo Scientific Nalgene

  • Autoclavable Polypropylene Utility Trays

    Thermo Scientific Nalgene

    Heavy-duty for repeated autoclaving of small instruments and labware With tapered sides, rounded corners and strong rims Stackable

  • Stirrer Carboy 10 L & 20 L

    Thermo Scientific Nalgene

    Polypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm) closures …

  • Ensure leakproof performance with Thermo Scientific™ Nalgene colored closures—one-piece and linerless with integrally molded seal ring. The opaque closures protect contents from UV light when used with opaque bottles.

  • Plastic Separatory Funnels

    Thermo Scientific Nalgene

    Polyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…

  • Nalge 2121 series Autoclavable bottles with rigid and translucent walls All bottles have size 100 polypropylene cap Excellent chemical resistance NOTE: Not recommended for shipping liquids. Not leakproof.

  • Heavy-walled, unbreakable in normal use Polypropylene has excellent chemical resistance and withstands continuous service at 130°C Autoclavable 2,000 mL flasks have molded-in graduations Stopper size: 50 mL flask No.1; 125 mL flask No.3; 250 mL flask No.6; 500 mL flasks No.7; 1,000 mL flask,…

  • LDPE Wide Mouth Carboys

    Thermo Scientific Nalgene

    Nalge 2234 series Lower-density bottles have molded handles and polypropylene screw cap Size 100 Walls are rigid and opaque Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.;…

  • Nalge 6501 For transport and storage of glass reagent bottle, 5-pint and 1-gallon capacity Neck and bottle cap are protected Clear polycarbonate lid allows for identification of bottle contents No need to remove bottle from carrier before pouring, Top twists off for removal from cover

  • Nalgene HDPE Centrifuge Bottles

    Thermo Scientific Nalgene

    High-density Polyethylene bottles RCF to 8,000 x g Withstand temperatures to -100°C Flat bottoms HDPE bottles are for use with refrigerated centrifuges. Bottles include 43 mm polypropylene screw caps. Dimensions (o.d. x H, mm): 61 x 128.

  • Polypropylene Wide Mouth Jars

    Thermo Scientific Nalgene

    Nalge 2118 Polypropylene with polypropylene screw closure. Translucent jars are repeatedly autoclavable, with excellent chemical resistance.

  • Wide Mouth Wash Bottles

    Thermo Scientific Nalgene

    Made of lower density polyethylene with a wide mouth Polypropylene screw cap, size 63 mm and delivery spout are molded in one-piece Draw tube is polyallomer

  • Cryogenic Markers

    Thermo Scientific Nalgene

    Cryoware Black Markers Marks permanently Black ink Used for marking cardboard and polycarbonate. Ink will not fade at ultra-low temperatures. Smudge-proof. Packages consist of four extra-fine-point black pens.

Compare Tool

Select up to 3 products