Organic Chemistry Kit

Compare Tool

Select up to 3 products

Organic Chemistry Kit
1 - 32 of 38
Sort
View
Show
  • Organic Chemistry Glassware Sets

    United Scientific Supplies

    Organic Chemistry Glassware sets are available in a standard set of 9 and a deluxe set of 16 pieces. The Standard set is designed to cover essential requirements for organic chemistry and is suitable for preparations up to 30g. All glassware is jointed. Both sets come in a sturdy, form fitting…

  • Standard Threaded 14/10 Microscale Kit

    Kimble

    Chemistry Kits The Standard Kit contains all the components necessary to perform the experiments described in the following texts: Organic Laboratory Techniques: A Microscale Approach, Pavia, Lampman, Kriz, Engel, Saunders College Publishing and Microscale Organic Laboratory, Mayo, Pike,…

  • Chemistry Kit

    Corning

    Corning brand organic chemistry kits utilize Standard Taper ground glass joints throughout, which enables most of the standard laboratory assemblies to be constructed with ease and efficiency. They are particularly useful in teaching and research establishments where assembly time is at a premium. …

  • Williamson Kem-Kit® Macroscale Kit

    Kimble

    …the experiments detailed in the Williamson text Macroscale and Microscale Organic Experiments published by D.C. Heath and Company, Lexington, Massachusetts. These experiments can also be performed with the KONTES Microscale Kit (1217C23). Students use the separatory funnel for extractions and…

  • SYNTHWARE Organic Chemistry Kit, 14/20

    Kemtech America

    Organic Chemistry Kit, Synthware, Joint Size: 14/20.

  • Kimax, Organic Chemistry Kit Complete With Polyethylene Case

    Kimble

    KIMAX LABSET with full length 24/40 joints. Case is heavyweight corrugated and inserts are soft foam.

  • SYNTHWARE Organic Chemistry Kit, 24/40

    Kemtech America

    Organic Chemistry Kit, Synthware, Joint Size: 24/40

  • Column 190 mm 19/22

    Corning

    …condenser has 19/22 Standard Taper inner and outer joints, is simple in design and easy to use. Side tubulations are 10mm O.D. Distilling condensers are widely used in the lab, especially for fractionation. This condenser is also a replacement for organic chemistry kit No. 6949E (7177U65).

  • PYREX® Combination Reaction and Receiver Tube with Two 24/40 Standard Taper…

    Corning

    …tube is approximately 200mm long and may be used for simple semi-micro vacuum or atmospheric distillation, either as a reaction flask or a receiving tube. It has two 24/40 Standard Taper outer joints. This tube is also a replacement part for organic chemistry kit No. 6949 (Thomas No. 1234F29).

  • Atomic Models Set

    United Scientific Supplies

    …complex organic and inorganic molecules. The teacher set contains 100 atom centers and 86 bonds. The student set has 48 atom centers and 35 bonds. Both sets come in durable plastic storage boxes with a copy of the periodic table for easy reference. Sets can be used to model different organic and…

  • SYNTHWARE Organic Chemistry Kit, 19/22

    Kemtech America

    Organic Chemistry Kit, Synthware, Joint Size: 19/22.

  • SYNTHWARE 14-Piece Microscale Organic Chemistry Kit

    Kemtech America

    Organic Chemistry Kit, Microscale, Synthware,Joint Size: 14/10, 14 pieces.

  • The Chemistry of Invisible Inks STEM Kit

    United Scientific Supplies

    … This kit is a unique teaching tool for introducing your students to the fascinating chemistry and physics behind invisible inks, i.e. colorless substances usable for writing that can be made to turn to color using a chemical or physical process. Students investigate how organic fluids and…

  • Corning® Rubber Thermometer Holder

    Corning

    This Corning® rubber thermometer holder has a 17mm O.D. and a 13mm I.D. and is designed for use with the No. 7711 mercury thermometer. It is a replacement part for organic chemistry kits Nos. 6949-6949K.

  • PYREX® 7x280mm Capillary Tip Bleed Tube

    Corning

    These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.

  • Tube 24/40

    Corning

    …ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a replacement part for Corning® organic chemistry kit No. 6949 (1234F29).

  • PYREX® Three-Way 120° Angle Connecting Adapter with 24/40 Standard Taper Joints

    Corning

    …approximately 120° angle from the lower joint. The lower end is equipped with an inner 24/40 Standard Taper joint, and the upper end and sidearm with an outer 24/40 Standard Taper joint. This tube is also a replacement part for Corning® organic chemistry kit No. 6949 (Thomas No. 1234F29) .

  • Funnel 125 ml

    Corning

    …stopcocks and inner and outer 14/20 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. This funnel is also a replacement for organic chemistry kit No. 6949K (0318V10). The plug also reduces freezing problems and grease contamination. For PTFE stopcock plugs, see No. 7681.

  • PYREX® West Condensers, Drip Tip, with 14/20 Standard Taper Outer and Inner…

    Corning

    …190mm long jacket that has a 14/20 Standard Taper top joint. The bottom has 14/20 Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tubulation O.D. is approximately 10mm. This condenser is a replacement part for organic chemistry kit No. 6949K.

  • PYREX® Three-Way Angle Connecting Adapter with 14/20 Standard Taper Joints

    Corning

    …an approximately 75° angle from the lower joint. The lower end and sidearm are equipped with inner 14/20 Standard Taper joints, and the upper end with an outer 14/20 Standard Taper joint. This tube is also a replacement part for Corning® organic chemistry kit No. 6949K (Thomas No. 0318V10).

  • PYREX® Three-Way Angle Connecting Adapter with 19/22 Standard Taper Joints

    Corning

    …the lower joint. The lower end and sidearm are equipped with inner 19/22 Standard Taper joints, and the upper end with an outer 19/22 Standard Taper joint. This tube is also a replacement part for Corning® organic chemistry kits Nos. 6949E (Thomas No. 7177U65) and 6949G-2 (Thomas No. 0318V26).

  • PYREX® 105° Angle Vacuum Connecting Adapter with 14/20 Joints

    Corning

    These PYREX® 105° angle vacuum connecting adapters have a tubulation of 10mm O.D. for attaching to a vacuum pump and inner and outer 14/20 Standard Taper joints. Includes a drip-tip on the inner tube. These tubes are also replacement parts for organic chemistry kits No. 6949K.

  • Tube 19/22

    Corning

    …PYREX® 105° angle vacuum connecting adapters have a tubulation of 10mm O.D. for attaching to a vacuum pump and inner and outer 19/22 Standard Taper joints. Includes a drip-tip on the inner tube. These tubes are also replacement parts for organic chemistry kits (7177U65) and (0318V26)

  • PYREX® Distilling Tube Adapters

    Corning

    60° angle Three Standard Taper 24/40 joints Approximate length 206 mm This tube is also a replacement for organic chemistry kits. Type I, Class A borosilicate conforming to federal specification DD-G-54 lb and ASTM E 438. Also meets the US Pharmacopoeia specs for Type I borosilicate glass.

  • PYREX® Cold Finger Condensers, with 24/40 Standard Taper Inner Joints

    Corning

    …of relatively low efficiency, is often used to regulate refluxing by adjusting the flow of air or water through it (dephlegmation). The tubulation O.D. is approximately 10mm. This condenser has a 24/40 inner Standard Taper joint and is a replacement part for organic chemistry kit, No. 6949.

  • Tube 19/22

    Corning

    …The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a replacement part for Corning® organic chemistry kit No. 6949E (7177U65). Joint Size: 19/22 Length: 57mm Made of Pyrex® glass

  • PYREX® 250mL Chromatographic Reagent Atomizer

    Corning

    …PYREX® distilling condenser has 14/20 Standard Taper inner and outer joints, is simple in design and easy to use. Side tubulations are 10mm O.D. Distilling condensers are widely used in the lab, especially for fractionation. This condenser is also a replacement for organic chemistry kit No. 6949K.

  • Funnel Comp 100 ml

    Corning

    …stopcock and inner and outer 24/40 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement PTFE stopcock plugs, see No. 7681. This funnel is also a replacement part for organic chemistry kits No. 6949.

  • VitroKit

    Wheaton

    …basic organic chemistry procedures Kit range can be expanded as needed by adding other standard glassware Usable interchangeably with Standard Taper ground joints, although smooth, transparent Clear-Seal® joints less likely to seize and do not require lubrication Kit contains…

  • Micro Kit 14 / 10 Standard w / Ekono Case

    Kimble

    Kits feature 14/10 Standard Taper connections. The Standard Kit contains all the components necessary to perform the experiments described in the following texts: Organic Laboratory Techniques: A Microscale Approach, Pavia, Lampman, Kriz, Engel, Saunders College Publishing; and Microscale Organic

  • Phosphate Vacu-vials® Kits

    CHEMetrics

    …4500-P D-1999. Test kits employing this chemistry utilize a stannous chloride reduction. Phosphate reacts with ammonium molybdate and is then reduced by stannous chloride to form a blue complex. Results are expressed as ppm (mg/L) PO4. Our Phosphate Test Kit comes in a cardboard…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.