Lab Filtration Products

Depth filtration glass micro fiber GRADE A-E - Fine porosity and fast flow rate, with a 1.0 µm size particle retention. Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm Filtration speed:...

Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting...

The EZLabpure™ Bottle Top Filter assembly from Foxx Life Sciences is designed for safe and easy filtration in the lab.An industry first, Foxx Life Sciences sells a stable, low-profile, patented optional pedestal base or a low cost ring-stand cradle. Each holder provides a stationary vacuum...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

The labForce® Premium Cell Strainer system is a fast and easy-to-use solution for detaching, isolating and straining cells from clusters and tissues. A polypropylene frame supports a nylon mesh that is available in three color-coded porosities: 40μm (blue), 70μm (white), and 100μm...

Designed for general qualitative laboratory work Fast filtering speed; 25um particle retention Low retentivity, which retains coarse or gelatinous precipitates such as aluminum hydroxide, cobalt carbonate, mercury iodide and magnesium hydroxide Creped surface; thickness approximately 0.23 mm; 24...

Nest syringe filters have pore size either 0.22μm or 0.45μm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL Retention volume<115 µl maximum operating temperature: 100°c autoclave at 125°c for 15 min....<>

Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or multipack, and...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they are ideal for the filtration of...

Non-sterile, sample prep membrane filters 7 membrane types Female Luer-Lock inlet, male Luer-slip outlet Solvent resistant polypropylene housings PES, GMF, Polypropylene and Cellulose Acetate membranes are certified for Ion Chromatography The polypropylene housings with all Target syringe filters...

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a...

Uniform pore structure for low binding applications where reliable, fast flow rates and high throughputs are required Polyethersulfone Plain surface Hydrophilic Withstands temperatures up to 135°C Filters are inert, providing extremely low extractable levels in critical sterilization...

Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers...

This disposable disaggregator is available with 35µm or 50µm separator screens. It has a high-density polyethylene casing and can be sterile and non-sterile. The internal mechanical part is in stainless steel and is made up of a fixed screen with about 100 hexagonal bore-holes, around each of which...

EZFlow® cell strainers are manufactured from a strong nylon mesh with evenly spaced mesh pores. They are available in three mesh sizes (40 µm, 70 µm, and 100 µm) and three colors (bule,white, and yellow respectively) for easy identification. These cell strainers are sterile,...

CELLTREAT Vacuum Filter Systems are ideal for large volume sample separation and purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes...

Pure PTFE (Polytetrafluoroethylene) fibers are sintered to create a unique depth-type filter. These PTFE filters offer superior handling and minimal fiber slough-off compared to glass and quartz filters. Naturally hydrophobic, the media will separate aqueous from non-aqueous phases of mixtures....

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation counting and...

EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Nylon membrane is has great chemical resistance and makes them ideal for filtering more aggressive...

Overview Durapore ®  membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits Available in several pore sizes (both...

Designed for general qualitative laboratory work Medium filtering speed; 6 µm particle retention Medium retentivity, which retains medium crystalline precipitates such as aluminum phosphates, barium carbonate and lead chromate Thickness approximately 0.15 mm 6 µm pore size

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and hydrophobic interactions similar to...

Foxx Life Sciences’ Autofil Bottle-Top Filtration Systems are disposable, sterile, vacuum operated systems for the sterile preparation of buffers, tissue culture media, microbiological media, and other biological fluids. Systems are available with asymmetric 0.22 µm (sterilization grade)...

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are...