Lab Filtration Products

Designed for very fine precipitates Slow filtering speed; 1 µm particle retention High retentivity, which retains very fine crystalline precipitates such as cuprous oxide, lead sulfate, barium sulfate and manganese carbonate Thickness approximately 0.20 mm, 1.5 µm pore size

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively binds trace proteins.

The labForce® Premium Cell Strainer system is a fast and easy-to-use solution for detaching, isolating and straining cells from clusters and tissues. A polypropylene frame supports a nylon mesh that is available in three color-coded porosities: 40μm (blue), 70μm (white), and 100μm...

Qualitative cellulose filter papers perform separation by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media is widely used in methods requiring the determination and identification of particulate in both liquids and gas. Also, this natural...

A deep black, qualitative paper for filtering light colored sediments, etc. Medium speed Retains crystalline precipitates of medium fineness 6 µm pore size

Depth Filtration Glass Micro Fiber GRADE D - Coarse porosity, fast flow rate, with a 2.7 µm size particle retention. Well suited for higher volume and repetitive laboratory filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass...

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28 mm Basis...

Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or multipack, and...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a very low binding capacity for...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they are ideal for the filtration of...

By pressing the lever, the EZ-Pak dispenser delivers a single sterile membrane and automatically collects the protective packaging. No protective papers to separate manually from membrane, eliminating time and contamination risk from handling membranes and packaging Easy-load pleated band membrane...

The labForce® Solvent Filtration Bottle Top Vacuum Filters offer a revolutionary approach to bulk solvent filtration. Safer, faster, and easier to use than conventional glass filtration assemblies, labForce®’s Solvent Filtration funnels screw onto any vacuum-capable GL45 threaded...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for filtration of aqueous or...

CELLTREAT Vacuum Filter Systems are ideal for large volume sample separation and purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes...

I.W. Tremont offers a diverse product line of high quality membrane filters available in a variety of materials, diameters and pore sizes and suitable for a wide range of applications including cell retention, In Vitro Diagnostics, particle collection, clarification and sterile filtration of aqueous...

Depth filtration glass micro fiber GRADE B - Fine porosity, medium to fast flow rate, with a 1.0 µm size particle retention. Ideally suited for the collection of biochemical polymers that have been precipitated by denaturation. This material is twice as thick as Grade A with a higher loading...

Quantitative cellulose filter papers are primarily used in gravimetric analysis procedures and perform separations by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media family is also widely used in methods to prepare samples for further...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use as a prefilter in series with...

Made of sturdy polypropylene and strong nylon mesh Three different pore sizes available: 40μm, 70μm, or 100μm, strainers are color-coded according to pore size for convenience Fits perfectly into Biologix 50mL Centrifuge Tubes Gamma radiation sterilized, non-pyrogenic

Depth filtration glass micro fiber GRADE A-E - Fine porosity and fast flow rate, with a 1.0 µm size particle retention. Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm Filtration speed:...

mdi’s Grid Marked Cellulose Nitrate Membranes feature a convenient surface grid that facilitates quantification of colonies. Packaging in reel form facilitates the usage with Automated dispensing machines. Compatible with all automatic dispensers. The Gridded Cellulose Nitrate Membranes in...

Low-profile design; polystyrene Three membrane materials available: Cellulose Nitrate (CN), Surfactant Free Cellulose Acetate (SFCA) and Polyethersulfone (PES) Membrane diameter 50 mm with surface area 17.3 cm 2 Provide fast flow rates Graduations on upper and lower chambers, padless membrane...

With fritted disc sealed on bottom. Overall length 125mm. All porosities of a given size are priced the same.,/p>

All capsules containing membrane media are preflushed with purified water to reduce extractable.  GVS capsules made with Polypropylene housings are food compliant (FDA/EU), as restrictions may apply depending on the final application, it is the end user's responsibility to determine full...