Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…

Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while…

High quality screw cap sample tubes manufactured of translucent autoclavable polypropylene. Tube with internal threads. Caps are supplied with or without a silicone washer, to ensure a positive leakproof seal at all temperatures. A 1-1/4 turn of the cap is sufficient to seal the vial. Since both…

Features Centrifugation: Over 20,000 x rcf Material: Ultraclear medical grade polypropylene Thread: Convenient EasyTurn 3/4 - turn Automation: 2680 - 00 2.0mL tube with orientation fin in the skirted base

Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Microcentrifuge tubes are designed to provide secure, leakproof seals while…

Screw Caps with Rubber Grips & Molded O-Ring. Ultra-pure polypropylene with an inert TPE O-ring molded directly into the cap. Rubber grips allow for effortless opening and closing--even when frozen. Contrasting color strips enable easy branding or organization. Easy 3/4 turn to open and close.

These Costar® 0.65mL microcentrifuge tubes are made of colored polypropylene and are certified RNase-/DNase-free. Rainbow pack includes one bag each of blue, green, yellow, red and orange tubes. Supplied nonsterile and are autoclavable. External graduations and frosted writing spot for easy…

The LVL Technologies pre-sterilized tubes and caps have very low protein binding thereby making it ideal for sample dilution.

Slitted single caps for tubes Polypropylene Septa Cap

Made from low-retention resin using diamond-polished molds to ensure complete sample recovery and optimal clarity Graduated with etched labeling surface on cap and sidewall Flat cap design Side-wall gated for easy pellet viewing Positive seal cap allows repeated cap closures and…

labForce® Screw Caps are designed to precisely fit labForce® Screw Cap Microtubes.  Featuring an easy 3/4 turn to open and close, labForce® screw caps reduce the risk of repetitive stress injuries (RSI) caused by manual turning. All caps feature: Synthetic O-ring to…

A perfect leakproof seal is obtained by the use of a specially designed flexible sealing lip inside the polyethylene closures. Cap also feature a long skirt and a super fast thread design allowing them to be removed or sealed with a single turn. Caps and tubes are sold separately.

Material: translucent polypropylene (PP) Very low protein binding therefore well-suited for sample dilution Closable either with a cover mat, 8-Tube Strip or self-adhesive foil Autoclavable for 20 min at 121°C Temperatur-restistant to -80°C LVL Technologies products are intended…

Natural, Polypropylene Non-Sterile, Bulk Bag, 1,000 Tubes/Bag, 5 Bags/Case Grad Lines: Yes Certified RNase/DNase Free Certified Human DNA Free Certified PCR Inhibitor Free Certified Pyrogen Free

DNase/RNase-free External graduations and frosted writing spot for easy sample identification Flat cap surface for convenient labeling Withstands maximum RCF of 17,000 x g Costar microcentrifuge tubes are certified RNase-/DNase-free and are autoclavable. The tubes are made of polypropylene.

Suitable for tissue culture and general bacteriological use Provided with marking spot which also serves for orientation Caps are not included with tubes and must be purchased separately Packaged in styrofoam trays 9215D32 tube takes size 13-415 cap and is sold in cases containing…

Axygen® MaxyClear microtubes are availabe in a variety of colors. Maxymum Recovery® and sterile options are also available. SnapLock microtubes have frosted cap surfaces and frosted side panels, ideal for labeling. Each cap features a piercing port in the center of the cap. Will…

Tube made of polypropylene / Cap made of polyethylene Designed for storage and transportation of biological material. Manufactured from non-toxic polypropylene, tubes provide strength and clarity and exhibit some unique design features. Five sizes are available from 5 to 30 ml. The…

These premium quality tubes feature sturdy, uniform bottoms and consistent lengths. The 10x75 and 12x75mm sizes are suitable for cell washing procedures. Amber premium quality tubes are produced from amber borosilicate glass to give superior protection for light sensitive applications. …

Suitable for collection and transport of non-human bacteriological, serological and cytological samples Also useful for hygienic controls in food industry as well as in environmental field Swab tubes are made of polystyrene

Axygen® 1.7mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

Axygen® 1.5mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

1.5 and 2.0 ml microcentrifuge tubes, graduated, with frosted window and flat, safe-lock cap These microcentrifuge tubes are moulded from virgin polypropylene. Their safe-lock mechanism guarantees closed tubes even during boiling or autoclaving. The innovative cap design includes an additional…

Made of polypropylene Designed for the storage and transportation of biological material. Manufactured from non-toxic polypropylene, the tube provides strength and clarity and exhibits some unique design features. The vial has external threads, providing a smooth and uniform inner surface,…

labForce® Screw Cap Microcentrifuge tubes are an ideal solution for customers looking for a secure environment for their precious samples and reagents.  Available in a variety of configurations, sizes, and colors the labForce® line of screw cap microcentrifuge tubes has an option for…

The Greiner Bio-One tube is ideally used in scientific laboratories while conducting experiments.

Made of polystyrene This tube is used with the Roche Cobas Analyzer. It has perfect clarity for easy ­­­­viewing of contents. This graduated false bottom tube has a capacity of 2.5 ml and will accept bar code labels.

Greiner Bio-One offers a comprehensive range of tubes and multipurpose beakers for various applications. The vessels are available in different materials, with and without caps and with labelling options. Our tubes are made of different materials: Polystyrene (PS) is ideally suited for optical…

Six styles of caps to choose from and two sealing types: O-ring seal and lip seal. The cap is molded with a deep internal lip that fits snugly against the interior wall of the tube thus preventing the contents from coming in contact with the seal or threads, thereby reducing the chances of…

In addition to the well-established advantages of the SAFE® XT technology, which offers the lowest possible risk of contamination, the most efficient use of space and a patented two-phase compression seal, each tube is perfectly suited for the specific requirements of modern biobanking. XXLX…

8-Strip Microtiter Tube Caps, sterile and non-sterile

Microcentrifuge Tubes are free of heavy metal. Reaction tubes are for free of detectable DNase, RNase, human DNA. High chemical and temperature resistance. Application: Suitable for Eppendorf, Viatron, Most Analyzer Systems, including Eppendorf®, Viatron, Roche®, & Beckman® Systems