1.5 Ml Microcentrifuge Tubes

Available in 0.5mL, 1.5mL, 2.0mL & 5mL MACRO Tube Globe Scientific Locking Microcentrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure – Maintains sample…

Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

…magnetic beads, and enables handling of up to six samples in 1.5 ml microcentrifuge tubes Provides convenience by making it easy for you to perform small-scale purifications and enrichment of sample volumes up to 6x1.5 ml. Process up to six samples in parallel. Allows for optimal performance…

… Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and 0.6 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL. Assorted…

…opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification. These Simport centrifuge tubes withstand centrifugal forces of up to 20,000g for the 1.5 ml tube and 5,000g for the 5 ml size. Will withstand extreme temperatures from -90 °C up to…

…the tube from opening accidentally (e.g., during heating) Tubes can be autoclaved when open (121 °C, 20 min) Can be easily and single-handedly opened Frosted labeling surfaces Excellent mechanical stability during centrifugation: up to 30,000 x g for 0.5 ml and 1.5 ml tubes; up to…

…lysis procedure and a novel silica-based membrane to achieve highly efficient plasmid DNA purification. The typical plasmid DNA yield from a fresh 1.5 ml culture of E. coli containing a high copy number plasmid is approximately 9 ?g. Instead of organic solvents, the kit contains chaotropic salts…

Withstand 17,000 x g Made of polypropylene RNase/DNase free Our original micro tubes were introduced in 1978. Two decades later, thousands of laboratories are still using them, thanks to their broad selection and reputation for reliability. Although we have subsequently introduced…

…for protein extraction. Uses 1.5 ml microcentrifuge tubes, grinding resin and disposable pestles. Process up to 100 mg of sample per tube in about 10 min. Disrupts small tissue and cell samples for protein extraction.Uses 1.5 ml microcentrifuge tubes, grinding resin and disposable pestles.Process…

Tested to 20,000 RCF Graduated at 0.1, 0.5, 1.0 and 1.5 mL Leakproof lid is easily pierced Frosted writing surface for easy identification Capacity 1.5 mL

… contamination. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. Caps are supplied with attachment loops in order to prevent contamination and mix-up. These microcentrifuge tubes have all the other fine features…

…barrel into the tube to retrieve samples Available non-sterile or sterile and are RNase, DNase and pyrogen free Spin up to 25,000 x g with proper support in appropriate rotor 5mL Snap Cap Macrocentrifuge Tubes Provide convenience of 1.5mL microcentrifuge in a tube that holds…

…capacity (i.e., 120 x 1.5 mL tubes and other formats) while the Savant SpeedVac SPD2030 System accommodates higher capacity (i.e., 200 x 1.5 mL tubes and other formats). A variety of rotors are available for both systems to support sample formats from micro-centrifuge tubes, vials and microplates to…

…surface reduces the possibility of ripped or punctured gloves. Microcentrifuge tubes come in three capacities: 0.6 mL tubes are rated at 30,000 x g, 1.5 mL tubes are rated at 24,000 x g and 2.0 mL tubes are rated at 25,000 x g. Tubes come bulk packed in bags of 500 or 1,000 or individually wrapped…

Reinforced polypropylene (PP) is autoclavable Shipped flat to save shelf space and quickly assembled when needed Dimensions (L x W x H): 270 x 130 x 30 (10.6" x 5" x 1.2")

Ultra clear resin 0.5, 1.5, 2.0mL sizes Resealable bags Low profile caps with universal threads SuperClear™ Screw Cap Microcentrifuge Tubes are made from an ultra clear resin that gives you an excellent view of tube contents. These tubes include universal screw threads that…

Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at…

Biotix microcentrifuge tubes are manufactured with medical grade virgin polypropylene for superior clarity. These snapcap tubes are leak resistant, boil proof, and able to withstand 20000 RCF. Try our Microcentrifuge tubes: Sizes include 0.65mL, 1.5mL, and 2.0mL Graduation marks for…

… The 300D is supplied with s 24 place angle easy access rotor that can accommodate tube sizes of 1.5ml and 2.0ml microcentrifuge tubes. Additional adapters are available for 0.5ml, 0.4ml, and 0.2ml tubes. The rotor is equipped with a cover that easily "snaps" on and off. The 300D is…

…microcentrifuge tubes For tubes up to 1.5 mL; maximum cut diameter: 9.4 mm (0.370") Retrieve radioactive pellets from the tips of tubes easily without resuspension or the risk of splashed radioactive substances. Can be used with polyethlyene, polypropylene or polyallomer tubes.…

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

Graduated, 1.5 mL total capacity Seals securely with one hand Pierceable lid Graduated, rugged tubes are designed to withstand the stress of high speed centrifugation up to 17,000 rpm. The Microlock ® closure has a latch feature that eliminates sample loss and hazardous…

…vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of the A-I and 1-9 index that is permanently printed on each of the box's individual cavities. You don't need the lid on or a separate grid to identify your tubes. 5.13 x 5.13 x 2 inch. For…

…uniform heat. Polypropylene tubes are EtO sterilized. Microcentrifuge 0.5 mL Tubes have a frosted writing area and reliable snap cap. Made of autoclavable polypropylene, these graduated tubes can withstand temperatures up to 121°C. Microcentrifuge 1.5 mL Tubes feature frosted writing…

…with all SSI screw microtubes with 0.5, 1.5 and 2.0 ml nominal volumes, in conical and free-standing (skirted) base designs In conjunction with SSI microtubes, all caps can be centrifuged to over 20,000 in a rotor with appropriate support. Tubes and caps can be autoclaved and are suitable…

…of the tubes, for micro-filtrations, or basic separations. Press the lid release button and rotor comes to a stop. The LSE Mini Microcentrifuge includes an 8-place rotor that will accept standard 1.5 mL to 2.0 mL microcentrifuge tubes, and adapters are included for 0.5/0.4 mL and 0.2 mL tubes. Also…

…hinged storage box holds up to 100 tubes in a minimum of space (5.6 x 5.6 x 2.2 inch). It is the ideal container for screw cap microcentrifuge tubes, storing 25% more tubes per cube than other box types. Compatible with R5100 series freezer racks. Max. tube height = 49mm. Alphanumeric indexing…

…mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 2.0 mL microcentrifuge tubes…

…Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL are graduated at 0.1, 0.5, 1.0 and 1.5 mL. …

…centrifugation Unique ClickLok™ sealing mechanism Made of highest purity polypropylene Made of polypropylene These 0.6 ml and 1.5 ml graduated rugged tubes are made of laboratory grade polypropylene suitable to withstand the stress of high speed centrifugation up to 20,000g. The…

Polypropylene (PP) Reversible 96-well rack in an 8 x 12 format One side holds 1.5 mL, 1.8 mL, or 2.0 mL microcentrifuge tubes; the other side holds 0.5 mL tubes Alpha-numerically labeled, stackable, autoclavable

… 5mL  CapSafe™ Tubes For the highest level of sample security Our new 5mL tubes are a perfect companion to our existing 5mL tubes. Created for samples too small for 15mL tubes, yet too large for standard 1.5mL MCT's. Our new CapSafe™ tube features a specially designed…