Glass Stir Rods

Borosilicate Glass with Fire Polished Ends

With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

Soft Glass Stirring Rod, both ends round.

Pack of 12 stirring rods. Rods are made of soft flint glass, with both ends fire-polished and rounded.

…Polished Glass Solid Stirring Rods are constructed from smooth, low-expansion, low-extractable borosilicate glass. Their mechanical strength, excellent heat resistance, and outstanding chemical compatibility make them the perfect general use stirrer. Borosil® Glass Stirrers are…

Popular sizes in convenient packages Lengths are approximately 4', in packs of 10 lbs. Assortment pack contains each size glass rod, in the following quantities.

Stirring rod made of soft flint glass, 12" long and 7mm in diameter, with one end flat for use as a spatula or policeman. Sold as a pack of 12.

Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.

Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

Unground, 9mm OD stirring shaft design for use with our 9528 vacuum and debris free stirrer assembly. 380mm straight section, 416mm overall length. Use our 9530-08 blade.

…an integral fixing point for a retort rod and are BioCote™ antimicrobial protected. Each stirring hot plate is custom designed. Select a favorite body color and choose between a glass ceramic or ceramic-coated aluminum plate surface. The glass ceramic plate is chemical resistant, easy…

…hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant. Adjustable stirring rate provides great torque or high speed. Patented PTFE stirring rod bearing for reliable and quiet operation. Optional multi-layer stirring blades for optimal reaction results. …

…an integral fixing point for a retort rod and are BioCote™ antimicrobial protected. Each stirring hot plate is custom designed. Select a favorite body color and choose between a glass ceramic or ceramic-coated aluminum plate surface. The glass ceramic plate is chemical resistant, easy…

These flexible round bottom glass cleaners are ideal for use with a stirring rod (5mm opening to attach a stirring rod) to clean the bottom of narrow glassware such as test tubes and cylinders.

Made of natural rubber. Ideal for scraping and mixing applications in the laboratory. Sold as a pack of 12

…stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances. Thomas No. 1203D37 Prevents potential injuries at the rotating shafts and stirring elements. Can be directly attached to the EUROSTARs, RW 16 basic, RW 28 basic and the RW 20 stirring…

…stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances. Thomas No. 1203D37 Prevents potential injuries at the rotating shafts and stirring elements. Can be directly attached to the EUROSTARs, RW 16 basic, RW 28 basic and the RW 20 stirring…

Pass-thru rod for use with Caframo 13565 & 13566 stir motors attached to our 8081 flexible stirring shaft.

The EMEA60500/CE Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

…Plastic [1] Beaker, Glass, 50 ml [1] Beaker, Glass, 100 ml [1] Beaker, Glass, 250 ml [1] Evaporating Dish, Porcelain, 70 mm dia [6] Stirring Rods, Glass, 8” [1] Erlenmeyer Flask, Glass, 125 ml [1] Erlenmeyer Flask, Glass, 250 ml [6] Test Tubes, Glass, 18 x 150 mm [1]…

…Stainless Steel (1), Test Tube, Glass, 16x150mm (6), Test Tube Brush (1), Test Tube Clamp (1), Test Tube Rack, 2-tier, wooden (1), Tongs, Crucible (1), Triangle, Clay Pipe (1), Tripod Stand, 6 inch (1), Stirring Rod, Glass, pk/12 (1), Support Stand, with 18" Rod (1), Support Ring, 3" O.D.…

…magnet. Stirring rods and interior of flasks are siliconized to inhibit attachment of cells. When used with 8615G51 series MCS stirrers, these flasks provide gentle stirring speeds from 0 to 80 rpm with minimal shock to contents. Stirring is provided by a slowly rotating glass rod with spherical…

The EMEA60250/CEX1 Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

The EMEA60500/CEX1 Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

…the stirring rod that allows vacuum operation to as low as 1mm. Ground finish rods from other manufacturers are not recommended for use with this bearing. Complete 10mm diameter assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring (LG-9470-300), threaded heavy wall borosilicate glass…

…long aluminum support rod for attaching to a clamp holder or flex-frame. Polished aluminum case. 10mm stainless connecting rods on in/out drive. Can easily be used with ACE 8081 Flex-Shaft and either 8126-10 or 8124 chucks. Using a Flex shaft allows for use with any stir motor. At 3000 rpm expect…

… Unique design with glass surface Brilliant, clear white display Illuminated, flat stirring plate Key-lock button Reverse rotation Integrated USB interface (control via labworldsoft and use of Firmware Update Tool) Recessed thread for support rod Protection class IP42

…It will accomodate flasks with or without bottom valves. The motor mount raises and lowers as does the flask support system. This aids in aligning the flask, motor and stir rod. Motor mount accepts all rod mounted stir motors. All stand components are either anodized or powder coated aluminum.

…heating and stirring Reduced maintenance times and costs “Spill Trough” design channels spills away from electronics and controls. Support rod mount included for attachment of a standard retort rod for thermometer, buret, etc. LED lights for Power, Heat and Stir. Hot Top…

…liter reaction systems for research and production purposes. Systems feature jacketed vessels, multi-neck flask heads, Universal support stand, and either a rod mounted brushless DC stir motor in our 20 liter (IKA Eurostar 60 Control) or a flange mounted 3/8 hp brushless DC motor and 120vac control.

…components, improves performance, and prolongs product life Two piece casting design deflects spills away from electronics, includes a built in mount for an optional support rod (No. 400084) 1 x 3/8 inch stir bar (No. 401435) included with each stirrer Two-year manufacturer’s warranty