Glass Rod

Compare Tool

Select up to 3 products

Glass Rod
1 - 32 of 157
  • KIMAX Brand Glass Stirring Rods

    DWK Life Sciences (Kimble)

    With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

  • Pyrex® borosilicate rod. Sold by the length. *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Glass Stirring Rod

    United Scientific Supplies

    Soft Glass Stirring Rod, both ends round.

  • Friction Rods

    GSC International, Inc.

    … 603-1: Made of glass tubing and sealed on one end 603-2: Made for a solid glass rod and the edges of the glass are ground to a smooth finish 603-3: Made for a solid glass rod and the edges of the glass are ground to a smooth finish. Half of the glass rod has a smooth finish…

  • Borosilicate Glass Stir Rods

    GSC International, Inc.

    Borosilicate Glass with Fire Polished Ends

  • Stronghold Lattice Rods

    Harvard Apparatus

    …steel Have surface hardness that does not score from clamp binding screws Rods are 1/2” (13 mm) diameter and hollow to reduce weight Walls are 1/16” thick and continuously welded Tube ends plugged with tight-fitting, red end-caps of glass fiber reinforced molded Nylon

  • Glass Rods


  • Borosilicate Glass Rods

    Friedrich & Dimmock

    Popular sizes in convenient packages Lengths are approximately 4', in packs of 10 lbs. Assortment pack contains each size glass rod, in the following quantities.

  • MiniVac Waste Collection System

    Argos Technologies

    …cap with barbed fittings and tubing. Clear PETG plastic safety reservoir collects liquid in case flask cracks or leaks Use as stand-alone waste collection system or overflow vessel Polypropylene barbed cap fittings eliminate risk of broken glass rod fittings Use with in-house vacuum

  • …Polished Glass Solid Stirring Rods are constructed from smooth, low-expansion, low-extractable borosilicate glass. Their mechanical strength, excellent heat resistance, and outstanding chemical compatibility make them the perfect general use stirrer. Borosil® Glass Stirrers are…

  • …is 2.2 lbs (1 kg); without rod. 8847W35 Support Stand is 9 in. (230 mm) on a side (large); supplied with stainless steel rod 1/2” x 23” long (13 x 600 mm); entire base is filled with ballast to increase weight to 4.4 lbs. (2 kg). 8847W40 Base is similar to 8847W35, but without rod.

  • Rod Flint Glass 5mm D 24 in. Long

    GSC International, Inc.

    These rods are made from flint glass, have a 5mm diameter, and are 24" long. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including arsenic, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information…

  • Rod 8.00mm X 48"

    DWK Life Sciences (Kimble)

    Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Joins rod frames in different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 14"-20 hex screws. Stainless steel. Handle…

  • …utilizes Red Rod technology to deliver exceptionally fast response times and stable, accurate measurements. It has a high-flow annular ring junction and is ideal for measuring pH of “dirty” samples, including wastewater and food and beverage applications. Red Rod technology…

  • Stuart Magnetic Analog Stirrers

    Stuart (Cole-Parmer)

    …the glass is chemically toughened for extra resilience. All units feature an integral fixing point for a retort rod and are BioCote™ antimicrobial protected. Designed to seamlessly blend scientific precision with contemporary styling, each stirrer is custom designed. Choose between a glass

  • Polished Glass Stirrer Shafts

    Wilmad-LabGlass - SP Scienceware

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • Fiberglass support rods, 13mm (1/2") O.D., for use in place of aluminum rods that pit or become unsightly when used in corrosive atmosphere. Off-white or black color of these rods lends a more attractive appearance to lab setups. For use with all standard laboratory connectors.

  • Stir Rod Dairyware Acidity Test 10ml

    DWK Life Sciences (Kimble)

  • Lifting Hook (Quartz)


    A high quality quartz glass rod, that can be used to handle the quartz weighing scoop (N3142450).

  • Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.

  • …utilizes Red Rod technology to deliver exceptionally fast response times and stable, accurate measurements. It has a porous pin junction and is ideal for measuring pH in a variety of laboratory applications. Red Rod technology provides fast, accurate and reproducible measurements Red Rod

  • High-performance Red Rod technology now available for the digital HQD platform IntelliCAL PHC745 is a digital, combination glass-body probe with a refillable KCl reference and built-in temperature sensor. The PHC745 utilizes Red Rod technology to deliver exceptionally fast response times and…

  • Rod Thomas No. 1177N99: 1/2" X 24" Rod Thomas No. 1177P00: 1/2" X 36" Rod Thomas No. 1177P01: 1/2" X 48" Rod Thomas No. 1177P02: 1/2" X 72" Rod Thomas No. 1177P03: 1/2" X 84" Rod Thomas No. 1169K48: 1/2" X 60" Rod

  • Medium clamp has fixed screw action and open to 1 3/4” (45 mm) for tubes, flasks, columns and larger rods. Clamp has male connector.

  • Tapered 1mL Tissue Grinder with Teflon Pestle

    DWK Life Sciences (Wheaton)

    Borosilicate glass Especially for soft tissues Stainless steel rod is long enough to chuck into a suitable drive motor

  • …available. With a square 6.5 in. work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. An optional support rod (Thomas No. 1198Q89) is available for mounting thermometers, temperature probes, etc.

  • Electroscopes Kit

    United Scientific Supplies

    …using two electroscopes for positive and negative charge studies, and a Faraday's Pail experiment. Kit includes 2 Glass Flasks, 2 aluminum disc terminals, 2 sets of 4 foil leaves, 2 electrode assemblies, one aluminum can (Faraday Pail), 1 glass rod, 1 silk cloth, 1 acrylic rod, and 1 wool cloth.

  • Brownlee Classic Electrolysis Units

    GSC International, Inc.

    The classic unit contains J-hook electrodes made with an aluminum rod and platinum foil, graduated collection tubes, an acid resistant base, and glass battery jar. Instructions included.

  • Bolt latch clamp secures the top of Scale-Up Series™ reaction flask to our stand.

  • Borosil® Retort Base SS Steel Rod is made with SS Grade 201 material. Retort Base Rod can be used with Borosil Heavy Duty Retort base for laboratory application. Available in the sizes of 500mm, 600mm and 750mm sizes In collaboration with Borosil Glass Works, Foxx Life Sciences…

  • 303 stainless steel support rods, 13mm (1/2") O.D. for use in place of aluminum or fiberglass. For use with all standard laboratory connectors.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.