Fritted Glass Support Base

This 1000 mL graduated funnel, 47mm is designed for assembly with the fritted glass support base, Cat. No. 33972-B. Disclaimer: This product is not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the…

This 47 mm fritted glass support base is designed for assembly with either the 300 mL graduated glass funnel, Cat. No. 33971-300 or 1000 mL graduated glass funnel, Cat. No. 33971-1L.

…sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Recommended for general filtration Includes a coarse porosity (40-60 μm) fritted glass support base, 300mL graduated…

Glass Support Base, for Stainless Steel Screen Glass Support Base, Fritted

…HPLC solvents. The ground glass connection eliminates the possibility of phthalate contamination that can occur when using silicone or neoprene stoppers Each apparatus is supplied with 1000 mL funnel; 90 mm, 40-60 micron porosity, fritted glass support base; anodized aluminum clamp; and…

…solvents. The ground glass connection eliminates the possibility of phthalate contamination that can occur when using silicone or neoprene stoppers Each apparatus is supplied with 1000 mL funnel; 90 mm, 40-60 micron porosity, fritted glass support base; anodized aluminum clamp; and…

… Unlaminated PTFE or PVDF membranes are recommended for solvent applications. Complete set includes a borosilicate glass funnel and base, fritted glass filter support, anodized aluminum spring clamp, and silicone stopper. Parts are also available seperately. Filter Diameter: 25mm, Filtration…

Millipore Glass Vacuum Filtration Accessory ProductGlass Base and Stopper, 25 mm, Glass frit supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore…

…corrosive liquids for particulate contamination analysis The flask and fritted glass base are joined with a Standard Taper 40/35 ground joint, so liquids will only come in contact with borosilicate glass Vacuum hose connection is located above the filtration drip tip to prevent…

Millipore Glass Vacuum Filtration Accessory ProductGlass Base and Cap, 47 mm, Glass frit supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47…

This 47mm fritted all-glass support base with tubulation is designed for assembly with either the 300 mL graduated glass funnel Cat. No. 33971-300 or 1000 mL graduated glass funnel Cat. No. 33971-1L. Disclaimer: This product is not intended to mitigate the presence of microorganisms on surfaces…

…glass sealXX1012503 - Millipore Spring Clamp, 25 mm, AluminumXX1012502 - Millipore Glass Base and Stopper, 25 mm, Glass frit supportALIGNED25 - Millipore Alignment Guide, 25 mm, 5/PKFeatures & Benefits:. Volume graduations clearly indicate sample volume. Filter support available in fritted glass or…

…Ground glass sealXX1014703 - Millipore Spring Clamp, 47 mm, AluminumXX1014702 - Millipore Glass Base and Stopper, 47 mm, Glass frit membrane supportALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PKFeatures & Benefits:. Designed for easy loading and removal of membranes. Three membrane support…

…following items:(Catalog Number - Description)XX5014704 - Millipore Glass funnel, 500 mL, 47 mm, Borosilicate, Ground glass sealXX1014703 - Millipore Spring Clamp, 47 mm, AluminumXX1514702 - Millipore Glass Base and Cap, 47 mm, Glass frit supportXX1514705 - Millipore Ground Joint Flask, 1LALIGNED05…

…- Millipore Glass funnel, 1L, 90 mm, Borosilicate, Ground glass sealXX1019003 - Millipore Spring Clamp, 90 mm, AluminumXX1519002 - Millipore Glass Base and Cap, 90 mm, Glass frit supportFeatures & Benefits:. All-Glass construction has broad chemical compatibility. Borosilicate glass parts contact…

…glass filter holder assemblies for the microanalysis of small volumes of liquids for biological or particulate contamination under vacuum. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and base. While the sintered glass frit support…

…anodized aluminum clamp secures the membrane between the funnel and sintered glass frit support base. Available in three graduated funnel capacities 100, 500, or 1000 mL. The 13mL/100mL  features a two-part ground glass funnel for concentrating samples. The 13mL micro funnel mounts directly…

…that would tend to clog a 47mm diameter filter. The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen is recommended for viscous or proteinaceous solutions…

…glass base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. The PTFE support…

…glass surface post autoclaving. The funnel bottom is coated with PTFE. The PTFE flange covers the contact surface on the glass base(except for the sintered glass base). The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can…

…Ground glass sealXX1014703 - Millipore Spring Clamp, 47 mm, AluminumXX1014702 - Millipore Glass Base and Stopper, 47 mm, Glass frit membrane supportALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PKFeatures & Benefits:. Designed for easy loading and removal of membranes. Three membrane support…

…customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean filtrate or proteinaceous solutions. The borosilicate glass funnels are available in the following…

…customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean filtrate or proteinaceous solutions. The borosilicate glass funnels are available in the following…

…customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean filtrate or proteinaceous solutions. The borosilicate glass funnels are available in the following…

These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit. For…

…stainless steel support screen, PTFE support screen gasket, glass support base, 15 mL graduated funnel, anodized aluminum clamp and a #5 silicone stopper. Fritted Glass Support, 47 mm (4588A05) Used for general filtration. Supplied with a coarse fritted glass support base, 300 mL…

…low extractable borosilicate glass Unit includes a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in assemblies with stainless steel support screen. Assemblies with Teflon® faced bases and funnels allow the assembly…

… Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base, a 300 mL PTFE-faced graduated funnel, an anodized aluminum clamp and a #8 silicone stopper PTFE coating prevents membrane from adhering to ground glass surface Funnels are graduated from 100 to 250 mL in 25…

…AluminumXX1012532 - Millipore Glass Base and Stopper, 25 mm, For use with stainless steel screen support, Screen providedALIGNED25 - Millipore Alignment Guide, 25 mm, 5/PKFeatures & Benefits:. Volume graduations clearly indicate sample volume. Filter support available in fritted glass or stainless…

…stoppers. Support base has a coarse porosity glass frit and an integral vacuum connection that is located above the drip tip to prevent contamination of the vacuum line with filtrate droplets. Each apparatus is supplied with funnel, anodized aluminum clamp, fritted glass support base and filtration…

…glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures the 47mm membrane between the funnel and base. While the sintered glass frit support base…