Flask Rack

…The microplate platform will accommodate up to four deep well microplates. The clamp platform has spring loaded retaining bars that hold flasks, bottles, racks, etc. in place. Time and speed are set and displayed on the large LED. The broad speed range allows it to be used for gentle mixing as…

Adjustable shelf will accommodate a variety of funnel lengths and flask or beaker sizes. Rack is constructed of vinyl-coated heavy gauge wire. The rack holds twelve 2" to 4" diameter funnels. Dimensions: 16.25" H, 25.375" W, 10.75" D

…and water vapor Up to five racks interlock to form a rigid column of up to 20 levels Rack 3496V28 has center support on bottom and third tiers, allowing use of 2 half-width trays on each of these 2 tiers; recommended for use with tissue culture flasks. Rack 3496V36 has center support on…

Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

Provides accurate results for Kjeldahl digestions using either 30 mL or 100 mL flasks Two rear brackets provide adjustable mounting for glass manifold Each flask station consists of tubular heater element and stainless steel cup 200 Watt heater assemblies are recessed into top…

Round-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…

…extra Labconco washer racks, inserts or miscellaneous glassware. Accommodates up to two Labconco washer racks or four wire inserts. Alternatively, 48 adjustable and removable pins, 0.5" wide x 4.75" high (1.3 cm x 12.1 cm), may be arrange in the drawers to hold inverted flasks, beakers and other…

Versatile tray with threaded holes to attach 25 - 1000mL flask clamps, SH plate holders and SR racks.

…Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing labware. All models come with three size and length rugged V-channel pegs that can be moved and repositioned to hold a variety of labware, including beakers, flasks, bottles, test tubes and cylinders.…

…Sticky Tape is an alternative to flask clamps for securing vessels to a shaker platform. Ideal for bottles and dishes or containers that cannot be held with conventional flask clamps Tape can be used at speeds of up to 200 to 300 rpm depending on flask size, orbit diameter and load …

…alternative to flask clamps for securing vessels to a shaker platform Ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter, flask size and load …

…(6 plugs included). Select from single and double-sided models with up to 76 peg locations to hold glass or plastic labware such as beakers, flasks, bottles, test tubes and cylinders. Two removable polyprobylene baskets can be used for bulk rinsing, drying, transport and storage of small labware…

Inside flutings for rapid filtration For use in flasks or test tubes without filter rack

…tiered flat platforms hold trays, plates, dishes, etc. The universal platform has spring loaded bars that hold flasks, bottles, tube racks and odd-shaped containers. The predrilled flask platform is ideal for mixing and growing cultures. It's small footprint and low profile make it suitable for…

…capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications, while the convenient MAGic Clamp™ platform is also available for high speed mixing of Erlenmeyer flasks, tube racks or microplates. The MAGic…

Universal Platforms Allows for mounting of flask clamps, test tube racks, and bottle clamps Platform slides over top of included tray and is tightened with adjustment screws Optional accessories screw directly into mounting point openings Two-tier braces allow stacking of platforms with a…

Allows for mounting of flask clamps, test tube racks, and bottle clamps Platform slides over top of included tray and is tightened with adjustment screws Optional accessories screw directly into mounting point openings> Two-tier braces allow stacking of platforms with a 10" clearance…

…drive that can mix as many as five 1L flasks.  The convenient MAGic Clamp™ platform is also available for use with Erlenmeyer flasks and test tube racks.  The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. The…

…with screw holes: OSA11 is WxD: 300 x 360mm (11.8 x 14.2”). OSA36 is WxD: 400 x 400mm (15.75 x 15.75”). Compatible with a variety of accessories including flask clamps, tube racks, and bottle clamps. Non-slip Platform with Rubber Mat is WxD: 305 x 360mm (12.0 x 14.2”).

…ideal for tissue culture flasks, petri dishes and staining trays. The convenient MAGic Clamp™ platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different…

…The microplate platform will accommodate up to four deep well microplates. The clamp platform has spring loaded retaining bars that hold flasks, bottles, racks, etc. in place. Time and speed are set and displayed on the large LED. The broad speed range allows it to be used for gentle mixing as…

…The microplate platform will accommodate up to four deep well microplates. The clamp platform has spring loaded retaining bars that hold flasks, bottles, racks, etc. in place. Time and speed are set and displayed on the large LED. The broad speed range allows it to be used for gentle mixing as…

…The microplate platform will accommodate up to four deep well microplates. The clamp platform has spring loaded retaining bars that hold flasks, bottles, racks, etc. in place. Time and speed are set and displayed on the large LED. The broad speed range allows it to be used for gentle mixing as…

…culture flasks, Petri dishes and staining trays. The convenient MAGic Clamp™ (available from Benchmark Scientific) platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask…

…platform, ideal for tissue culture flasks, Petri dishes and staining trays. Additional platforms are also available for the Orbi-Shaker JR, including the convenient MAGic Clamp™ platform (PATENT PENDING) for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment…

…general tracking, and identification of lab materials that require sterilization. Economical solution for identifying vials, tubes, racks and flasks. Adheres to stainless steel, glass and polypropylene. Withstands temperatures from -320.8 to 249.8° F (-196 to 121°C ). A ribbon is required…

…for Petri dishes or other vessels that do not require clamping. The Flask Holder (8289M90) can accommodate up to four 250 mL flasks at one time. The Universal Holder (8289M95) accepts flasks, beakers, bottles and test tube racks between the two adjustable rubber rollers. Accessories …

…shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles. For high speed mixing, a patented MAGic Clamp platform is available that allows for magnetic attachment of flask clamps and tube racks. Heat - Shake - CO₂ Six side heating…

…In addition, convenient MAGic Clamp™ platforms (of multiple sizes) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method (PATENTED) has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.

…microplate platform will accommodate up to four microplates. The remaining platform has spring loaded retaining bars that adjust to hold flasks, bottles, racks and other containers in place. Three versatile platform options Shaking, mixing, agitating or vortexing Heavy-duty…

…digital models which include a non-slip mat that can be removed to mount flask clamps and tube racks directly onto the tray, and a digital Microplate Shaker model which can hold up to 4 microplates or 2 microtube racks. Applications ELISA Assays, Cell Cultures, Immunoassays, Protein…

…efficiency. The built in orbital shaker accepts a large assortment of platforms and clamps that can accommodate flasks, Petri dishes, and test tube racks. The maximum capacity is 4 x 1L flasks. Outstanding temperature uniformity Large viewing area for undisturbed monitoring of samples …