Flame Burner

Compare Tool

Select up to 3 products

Flame Burner
1 - 32 of 56
Sort
View
Show
  • Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 BTU…

  • …Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…

  • …D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both flame temperature and flame length. Burner produces a clear flame of any desired height…

  • …Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Flame Shield

    Humboldt

    Used to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.

  • Does not clog as easily when concentrated solutions are used. Cannot be used for the models 5100(PC), 4100, 2100, or 1100(B)

  • …Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch Water Column Pressures for LP Burners. Inlet OD for all Burners: 5/16" Serrated.

  • Single-Slot Burner Head for air-acetylene flames, slot dimensions:10cm long by 0.065 cm wide.

  • Fletcher Burner

    Humboldt

    This burner is engineered to produce a hot flame with economical gas consumption. The unit features dual adjustments for air and gas. Simply turn the knurled knob for gas,and turn the threaded yoke to regulate the air. Adjustable within 1/8" turn and has a 1/8" (3.2mm) IPS nipple below the stopcock.…

  • Flame 100

    WLD-TEC

    …Bunsen burners Gas consumption kept to a minimum because the flame burns only when it is really needed! mall and stable All housing components and the tube of the burner flame 100 are made of stainless steel made. The removable burner tube makes cleaning of the Flame 100 easy…

  • Wheaton Alcohol Burner

    DWK Life Sciences (Wheaton)

    … Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a ground glass stopper.…

  • Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 Overall…

  • Burner Dual-Wick Alcohol

    GSC International, Inc.

    This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

  • Burner Alcohol Dual-Wick

    GSC International, Inc.

    This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

  • …large brush flame patterns for fusing ore, working Pyrex and soft glasses, and performing other high-temperature melting applications. Extremely accurate flame direction, from three interchangeable burner tips, a telescoping mixing tube sleeve, a universal ball joint that directs the burner head to…

  • Smooth Pipe Stem Triangles protect glassware on hotplates and over burner flames

  • The mobile handheld laboratory gas burner powerjet 2 - The solution for all flame sterilization work in the microbiology or biotechnical fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar. Additionally the…

  • The 10 cm burner head is designed to be used with the air-acetylene flame. Because of its long burner path length, it provides the best sensitivity for air-acetylene elements.

  • StarFire Bunsen Burner ST

    Argos Technologies

    …shuts off the gas should the unit overheat. Gas supply is also cut off if the flame is extinguished for any reason. Burner head can be easily removed for cleaning any spilled liquids. The StarFire ST burner operates in manual mode or footswitch mode and is for non-portable use. Includes:…

  • …capacity 26 grams Flame adjusted by means of needle valve and gas flow control valve Activator button is pushed to produce ignition spark Overall dimensions are 3 3/8” x 1 7/8” x 5 5/8”; weight 7 1/2 oz. Includes removable base which converts burner to free-standing…

  • …to 900°C Low form crucible is 0.89 mm thick zirconium. Will begin to oxidize with prolonged exposure to air at temperatures above 550°C. Not recommended for use with fluoboric or fluorosilic acid. Suitable for high temperature fusions in the reducing flame of a burner. Without cover.

  • This burner features a removable nozzle with perforated tip and orifice designed to aim a large, hot, pointed flame in a modified M.I.T. pattern with great accuracy. A universal ball joint positions the flame easily for working large pieces of hard glass. Separate needle valves with leak-proof…

  • Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.

  • Burner Wing Tops

    Humboldt

    Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.

  • The 5 cm nitrous oxide burner head is required for nitrous oxide-acetylene operation. This burner head can also be used with air-acetylene or rotated to provide reduced sensitivity.

  • The three-slot burner head is designed to be used when analyzing samples with high concentrations of dissolved solids. The three-slot burner head is not compatible with some older gas control systems.

  • A 5 cm air-acetylene burner head is available for applications in which reduced sensitivity is required. It can be rotated to provide further sensitivity reduction, and it has a wide slot to prevent clogging.

  • When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

  • The Tirril Burner for Small-Scale Burning Test (ASTM D5025) supports the following standards: ASTM D5025 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Supplied complete with…

  • Burner is included. (Nitrous Oxide/Acetylene and Air/propane data coded burners are also available as optional extras). The instrument is equipped with a flame atomizer only. The positioning of which is fully controlled by the embedded computer system and the AA-Win Pro software. Three flame

  • …Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch Water Column Pressures for LP Burners. Inlet OD for all Burners: 5/16" Serrated.

  • … The ignition of the flame is computer controlled and the various safety interlocks offer a very safe operating system. Equipped with an Acetylene burner, the ignition of the flame is computer controlled with various safety interlocks, and an emergency flame off button is installed at…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.