Filtration Manifold

…filter funnel three-place manifold, for microbiology monitors and analytical funnels Stainless steel filter funnel three-place manifold, for microbiology monitors and analytical funnels AS 300 and 600 Series The stainless steel manifold for three or six filtration units is fitted with stainless…

AS220 Two-place vacuum filtration manifold for MBS I AS220 Two-place vacuum filtration manifold for MBS I

…mem/liane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable, stackable, light, recyclable plastic Microfil funnels eliminate autoclaving and minimize waste “Push fit” Microfil funnels tightly seal to manifold supports without…

…and notched membrane shape.PR 648 slot blot filtration manifolds are designed for ease of use and maximum filtration with minimum chance of cross-contamination. They make screening of many samples quick and easy. PR 648 Slot Blot Filtration Manifolds are designed for reproducibility. Large screws…

…mem/pane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable, stackable, light, recyclable plastic Microfil funnels eliminate autoclaving and minimize waste “Push fit” Microfil funnels tightly seal to manifold supports without…

Features Filtration cartridges for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems like Gilson Aspec™, Rapidtrace) or by gravity Cartridge sizes 3 mL and 6 mL Different membranes: PET (polyester); RC (regenerated…

With Microfil V filtration devices, there are no filter holders to assemble, no filter funnels to clean, and no filter support sterilization is needed after each filtration. Simply snap a Microfil V filtration device off the convenient carrying tray and you're ready to test. Place the device…

…funnel, protective lid, and filtration support so routine microbiological testing is fast and easy. No mem/pane handling prior to filtering. No filter holders, funnels and attachments to assemble and sterilize. No sterilizing the filter support after each filtration. Sterile, individually packaged…

Collect aliquots of filtrate during filtration Two mounting options: No.8 stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under…

1-place, 3-place, or 6-place Standard cup accepts No.8 or 8b stopper Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…

1-place, 3-place, or 6-place Tapered branch accepts 40/35 female joint Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…

…of the hydrophobic characteristics of PTFE membrane filters and their ability to stop aqueous aerosols. Pore sizes of 0.2 µm and 0.5 µm are typically used. Sterile venting of vacuum manifolds, fermentation vessels, and filtrate tanks and containers utilize PTFE 0.2 µm membranes.

The E-Z 96 Vacuum manifold is designed for DNA/RNA sample preparation with E-Z 96 DNA/RNA Plates. The chamber can be used either as a simple dump for waste filtrate or as a receptacle for a standard 96-well microtiter plate (collection plate). The upper plate has a machined recess that fits our…

…PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 µm and 0.5 µm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 µm membranes. WTP and TE membrane ranges WTP membranes use a polypropylene grid…

The EZ-Vac™ Vacuum Manifold features durable chemical-resistant construction and is capable of processing up to 20 samples simultaneously using vacuum pressure. The vacuum manifold allows researchers to simplify their nucleic acid purification workflows further by eliminating the need for…

Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

Vacuum manifold used for filtration and analysis of liquid samples Stainless steel filter funnel manifold, for use with microbiology monitors, analytical funnels and general filtration. Features and Benefits Durable Stainless Steel construction for easy cleanup and…

Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at each…

…using the optional PTFE stopcocks Separate waste container prevents tank contamination Use vacuum manifolds for SPE sample preparation, filtration, and elution. Manifolds come complete with everything you need—tank, lid, needles, stopcocks, rack, vacuum gauge, waste collection…

…to be used in the vacuum filtration of liquids for analysis of microbiological or particulate contamination. Manifold accommodates both 25 and 47 mm filter funnels. Increase laboratory productivity by processing multiple samples simultaneously. Aluminum manifold is especially suited for application…

…in the vacuum filtration of liquids for analysis of microbiological or particulate contamination. Manifold works with all micro funnel filter funnels including the 100mL and 300mL sizes. Increase laboratory productivity by processing multiple samples simultaneously. Aluminum manifold is especially…

…manifolds and accessories complement the quality of AccuBOND II sorbents. Flexible configurations and availability as complete assemblies or individual components mean that the user has the necessary capability at any stage from method development to high throughput operation. Vacuum manifold…

…vapors Portable design allows for easy sharing between workstations Applications Vacuum Source for Filter Holders, Manifolds, and Devices, including Samplicity® Filtration System, SNAP i.d.® 2.0 System, Multiscreen®HTS Filtration Manifold, and Stericup® Filters

Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

…evaporation flasks up to 10L or small vacuum oven applications generating chemically aggressive vapors. Models 2037 & 2047 are high flow DryFast models for lab vacuum applications requiring chemical resistance – vacuum manifold filtration, vacuum ovens, and laboratory automation.

…Microbiological filtration system MBS I is an excellent system for optimal microbiological control using membranes. The overall procedure time is reduced to a minimum. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to…

Standard size for microbiology  Sterility testing of antibiotics and pharmaceuticals  Use with sterility test manifold Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test…

…to a liquid-tight seal and allows filtration without having to open the funnel and risk introducing contamination Vent filter ensures no airborne contamination is drawn into the funnel during filtration Attaches directly to a standard laboratory manifold or use with adapter and stopper …

The lab filtration pump that transfers filtered liquids directly to waste Designed to improve operation time and comfort Simply connect the pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional…

…or tearing the membrane. The 304ss screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Base, Support, Gasket, Stopper Please Note: ALL Advantec items have…

…range of filtration media, including glass fiber, polyethylene, polypropylene, nylon, polyethersulphone (PES) and polyvinylidene fluoride (PVDF). Four well configurations (140µl to 15ml/well) are available. The microplates are suitable for vacuum/positive pressure manifolds or centrifugation.

…range of filtration media, including glass fiber, polyethylene, polypropylene, nylon, polyethersulphone (PES) and polyvinylidene fluoride (PVDF). Four well configurations (140µl to 15ml/well) are available. The microplates are suitable for vacuum/positive pressure manifolds or centrifugation.