Filter Funnel 47mm

Compare Tool

Select up to 3 products

Filter Funnel 47mm
1 - 26 of 26
Sort
View
Show
  • 47mm Magnetic Filter Funnels

    Pall Life Sciences

    …contamination using the Membrane Filter (MF) Technique. The Magnetic Filter Funnel is ideal for use with a filter funnel manifold or side-arm vacuum flask using a rubber stopper connection. Dual magnets ensure a tight, no-leak seal between the funnel cylinder and base, eliminating the…

  • Assembly consists of stainless steel funnel, funnel base, and filter support; anodized aluminum locking ring; nylon lockwheels; PTFE gaskets; silicone stopper; grounding wire. Holder is autoclavable but not with filter in place.

  • Funnel / PTFE Supp Assy 47mm

    DWK Life Sciences (Kimble)

    …mL PTFE-faced graduated funnel, an anodized aluminum clamp and a #8 silicone stopper PTFE coating prevents membrane from adhering to ground glass surface Funnels are graduated from 100 to 250 mL in 25 mL increments Prefilter size is 35 mm Approximate filter area is 9.6 cm² …

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    … Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter is 47mm. Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4")…

  • … 4 funnel sizes available Sintered glass, Stainless steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter

  • …Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup.…

  • Ground glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact…

  • Borosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy to…

  • funnel connects to the base guided by set pins. The locking nut on the funnel secures the assembly together without twisting or tearing the membrane. The 304ss screen(w/ PTFE gasket) ensures particles will not be shed into the filtrate. The No.8 silicone stopper mounts in a standard 1L vacuum filter

  • …will not be shed into the filtrate. The PTFE support can filter acidic solutions at a higher flow rate.  Units include: P/FC1: Funnel, Base, Support(gasket w/ ss screen), Clamp, Stopper, Receiver tube and clip. P/FC2: Funnel, Base, Support(gasket w/ ss screen), Clamp, Receiver tube and…

  • …shed into the filtrate. The PTFE support can filter acidic solutions at a higher flow rate. Available with a 300mL graduated funnel. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. Unit includes: Funnel, Flange(not included w/ sintered glass base), Base,…

  • …from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Recommended for general filtration Includes a coarse porosity (40-60 μm) fritted glass support base, 300mL graduated funnel, anodized aluminum clamp, and a 1L reservoir

  • …with PTFE to avoid filter damage and membrane adhesion during autoclaving. Complete set includes a PTFE-faced borosilicate glass funnel and PTFE-faced base, anodized aluminum spring clamp, and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area…

  • …hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm diameter flask, 76 mm diameter funnel and 430 mm high.

  • Analytical Filter Units

    Thermo Scientific Nalgene

    Peel-away funnels with reservoirs and CN membranes Nalgene 130 47mm CN membrane Complete pre-packaged sterile assemblies Stable wide-base design and 150 mL volume size for larger sample and rinse procedure volumes “Squeeze and twist” polypropylene design…

  • 47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    47mm sterile membrane filters. Also applicable for analysis of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm,

  • …includes a borosilicate glass funnel and base, anodized aluminum spring clamp, stainless steel support screen, PTFE gasket, and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting:…

  • …system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and silicone…

  • …system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate removal…

  • XX1104710

    MilliporeSigma

    …use with standard 1 L vacuum filtering flask or multiple place manifold. Sterifil holder, 250 mL, includes the following components: Sterifil cover, Caps, Swinnex® Filter Holder, Sterifil funnel, Sterifil holder base, Support screen for 47-mm Swinnex filter holder, O-ring, (5-329), Stopper.…

  • …for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has removable 47mm stainless steel support screen for use with viscous or proteinaceous solutions. Complete assembly includes a 300mL graduated funnel,

  • Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

  • Filterware™ Microfiltration Glassware

    Wilmad-LabGlass - SP Scienceware

    These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit. For…

  • …ideal for viscous samples and liquids with a heavy particle load or bioburden that would tend to clog a 47mm diameter filter. The anodized aluminum clamp secures the membrane between the funnel and glass base. While the sintered glass frit support base can be used for general filtration, the 304…

  • …Millicup-FLEX filtration unit offers a safe and efficient means for filtering a variety of aqueous and organic solutions, allowing the user to filter directly into GL45 vacuum-rated filtration bottles with their choice of 47mm disc membranes (sold separately). The ready-to-assemble, clampless design…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.