47 Mm Filter Holder

Classic Glass Filter Holders - Kit47 mm, PTFE-coated membrane support, 300 mL funnelThe Classic Glass Filter Holder is an essential tool for every research lab. The holder's multipurpose design is appropriate for a variety of applications and is available in three different support materials for…

Millipore Classic Glass Filter Holders - Kit47 mm, Glass frit membrane support, 500 mL funnelThe Classic Glass Filter Holder is an essential tool for every research lab. The holder's multipurpose design is appropriate for a variety of applications and is available in three different support…

Millipore All-Glass Filter Holders - Kit47 mm, Glass frit membrane support, 300 mL FunnelThe Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation.…

Millipore Classic Glass Filter Holders - Kit47 mm, Stainless steel screen membrane support, 300 mL funnelThe Classic Glass Filter Holder is an essential tool for every research lab. The holder's multipurpose design is appropriate for a variety of applications and is available in three different…

…Available in 25 mm and 47 mm sizes Autoclavable Filter holders can also be used for aseptic sampling of liquids or gases at point-of-use or when samples must be collected and analyzed on site. The 25 mm filter is used to filter up to 50 mL of sample and the 47 mm filter can filter up to one…

This 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…

Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

Millipore All-Glass Filter Holders - Kit47 mm, Glass frit membrane support, 300 mL FunnelThe Millipore All-Glass Filter Holder was designed for the filtration or aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation.…

…pharmaceuticals  Use with sterility test manifold Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test holder is recommended for microbiological or sterility testing where ambient…

Millipore Classic Glass Filter Holders - Kit47 mm, Glass frit membrane support, 300 mL funnelThe Classic Glass Filter Holder is an essential tool for every research lab. The holder's multipurpose design is appropriate for a variety of applications and is available in three different support…

…47 mm, 5/PKThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits and Millipore 47 mm All-Glass Filter Holder Kits.…

…47 mm, AluminumThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits, Millipore 47 mm All-Glass Filter Holder Kits…

…47 mm, Borosilicate, Ground glass sealThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits and Millipore 47 mm…

…47 mm, Borosilicate, Ground glass sealThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits and Millipore 47 mm…

…design  Can be flame sterilized The 47mm Stainless Steel Holder for the microanalysis of liquids for biological or particulate contamination under vacuum filtration. The unbreakable 304ss unit may be flame sterilized to sanitize the holder between samples. The 500mL funnel connects…

…top filter with the ability to re-use the filter housing Nalgene 320 Autoclavable Securely screws onto glass media bottles* with 33 mm or 45 mm neck sizes Deep screw threads attach directly to bottle allowing convenient filling and vacuum filtration without holding filter to bottle…

…steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

…Base and Cap, 47 mm, Glass frit supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm All-Glass Filter Holders Kits and Millipore…

…glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder offers an increased filtration area making it ideal for viscous samples and liquids with a heavy particle load or bioburden that would tend to clog a 47mm…

Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

…Base and Stopper, 47 mm, PTFE-faced membrane supportThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits.

O-ring, (5-329) for Swinnex 47 mm filter holder. Made of silicone Pack of 10

Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…

…clamps or O-rings. Unlike with conventional filter holders, incomplete sealing at the membrane/funnel interface is eliminated resulting in consistent recovery of organisms. Synonyms: Membrane filtration system Application: These filters find application in Clinical, Cosmetics, Environmental,…

…for clamps or O-rings. Unlike with conventional filter holders, incomplete sealing at the membrane/funnel interface is eliminated resulting in uniform recovery of organisms Synonyms: Membrane filtration system Application: These filters find application in Clinical, Cosmetics, Environmental,…

…for clamps or O-rings. Unlike with conventional filter holders, incomplete sealing at the membrane/funnel interface is eliminated resulting in uniform recovery of organisms Synonyms: Membrane filtration system Application: These filters find application in Clinical, Cosmetics, Environmental,…

…push-fit design of the Microfil funnels seals tightly to manifold supports without the need for clamps or O-rings. Unlike with conventional filter holders, incomplete sealing at the membrane/funnel interface is eliminated resulting in consistent recovery of organisms. Synonyms: Membrane…

Filter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…

…clamps or O-rings. Unlike with conventional filter holders, incomplete sealing at the membrane/funnel interface is eliminated resulting in uniform recovery of organisms. Synonyms: Membrane filtration system Application: These filters find application in Clinical, Cosmetics, Environmental,…

Rapidly decontaminate 47 mm Millipore filter holders between successive sample filtrations

High-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…

47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The…