2ml Tube Rack

LVL Technologies products are intended for sale/shipment within North America, South America, and the Carribean only. All other International customers should contact their local LVL Technologies distributor to place orders for LVL Technologies products.

Azenta products are intended for sale/shipment within the US , Canada, and Latin America only. All other International customers should contact their local Azenta distributor to place orders for Azenta products.

…to improve conical tube stability without sacrificing the stability of self-standing tubes. They are made of autoclavable polypropylene and are supplied in a rainbow pack of 5 racks (B, O, R, G, Y) or a single color of your choice. 80 well (5 rows of 16) for 1.5 to 2.0mL microtubes Rainbow…

…Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is needed. …

…autoclavable racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Racks lock together on each side so that several can be attached for larger experiments. Each hole has molded in numbers for sample indentification. Ergonomic design provides easy insertion and removal and of tubes.…

…"Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. The clear…

…“Reversible” Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. The clear…

…adapter that holds 48 x 2 mL Lysing Matrix tubes. The ergonomic design of the adapter ensures easy loading of Lysing Matrix tubes that remain securely sealed during homogenization. It stands stable on the bench top and is commonly used as a tube rack. Ideally suited for high-throughput applications,…

Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C).…

Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending   Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …

…double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for easy sample identification. Rack color assists in…

…benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. A 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is needed. A combo rack for …

AlteTube™ Screw Cap 2D Barcoded Tubes 2D coded tubes in SBS rack format Superior quality 2D barcoded tubes to assist sample identification. Designed for short or long term storage down to cryo temperatures. Innovative manufacturing. Our tubes are manufactured by a highly specialised…

…Matrix tubes. Standard adapter supplied with the FastPrep-24™ Instrument. The ergonomic design of the adapter ensures an easy loading of Lysing Matrix tubes that remain securely sealed during the homogenization. It stands stable on the bench top and is commonly used as a tube rack. Ideally…

…PCR tubes, strips, plates and most Microcentrifuge tubes. S700-56 Rack will hold twelve screw cap Microcentrifuge tubes or 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes along with up to 6 PCR strips or 48 individual 0.2 ml PCR tubes. Rack S700-58 will hold up to 24 x 1.5 or 2.0ml microcentrifuge…

…provision Insulated neck tube core Compatible design for both liquid and vapor phase storage One-year warranty on all parts and labor Three-year vacuum warranty ABS CryoMax System Total Vial Capacity: 2000 (2ml) Box Capacity: 20 Rack Capacity: 4 Vials per…

Reusable Micro centrifuge Tube Racks are manufactured in a state of the art molding facility using high purity virgin Polypropylene (PP). These racks hold a 12 x 8 array (96) of 1.5 and 2.0ml micro centrifuge tubes on one side with smaller positions (80) for the 0.5ml with a 16 x 5 array on the…

…Magnetic Separator was designed for use in laboratories which require both 1.5 mL- 2mL protocols and or 0.2 mL PCR strips from either 8 strip, 12 strip, or individual tubes. This rack is also a better choice for low volumes compared to our other PCR racks as the tubes sit higher up on the magnets.

…pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths,…

…tubes on one side, or 96 x 1.5 - 2.0mL microcentrifuge tubes on the other. The rack is arranged in the standard 8 x 12 array. It features a handy snap-in-place lid, and easy to grasp tabs on each end of the rack. Grid lines are molded on the side of the rack that accommodates the smaller tubes…

… Square- and round-style racks for incubating 0.5 to 2.0mL microcentrifuge tubes at elevated or reduced temperatures in water or ice baths Round-style racks fit conveniently inside 400 or 1000mL beakers Racks will float with a full load of filled tubes Tubes are supported below the lip…

…Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright…

…24-Place and 48-Place micro centrifuge tube and cryo-vial storage system. For 1.5mL and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in corpo…

…O-ring 1mL, 2mL, 3mL, 5mL sterile printed graduations and marking area self-standing star foot 50-place rocking lack included with each case 10 resealable bags of 50 tubes, 500/cs Cap inserts for cryogenic vials assorted colors 500/PK Locking rack for cryogenic vials…

…Twisty Tube racks made of Polypropylene (PP) make dilution and concentration study easier as it can transfer samples between 0.2ml PCR tubes to 0.5, 1.5 and 2.0ml tubes. Can be rotated and customized according to end-user application. These racks have tapered wells that securely suspend tubes and…

…Polypropylene (PP) multi-combination Freezer racks have 24 places in a 6 x 4 Array for 0.5ml, 1.5ml - 2ml size micro tubes. These can maintain the temperature of less than 4°C for almost 3.5 hours at room temperature and are fully autoclavable. These racks can be used for transportation of…

…3 racks)  96 Format for 1,0 ml and 1.4 ml tubes with Standard Profile lid (H=2"/50.8mm)  48 format Rack for Cryo Tube with Standard Profile lid (H=2 1/16"/52.8mm)  48 format Rack for Glass Tube (H=2"/51.6mm)  For Abgene: 2.0ml 2D BArcdoed Screw Cap Tube Rack(H=2…

…sample recovery Boilproof Low binding tubes fit all standard 0.5, 1.5, and 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing…

…3 racks)   96 Format for 1.0ml and 1.4ml Tube with Standard Profile Lid (H=2"/50.8mm)   48 Format for Cryo Tube with Standard Lid (H= 2 1/16"/51.6mm)   48 Format for Glass Tube (H=2"/51.6mm)   For Abgene: 2.0ml 2d Barcoded Screw Cap Rack…

…material hang-up and loss. Screw cap is made of the same material as tube Convenient - Molded ridges on tubes match serrations on racks (Cat. No. 4214), so tubes may be opened with one hand. Upright models stand without a rack. Seamless, conical design lets you extract all of sample wit pipette…

2.0mL Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

…barcode rack readers Racks for 2D barcoded AlteTubes. Designed for short or long term storage down to cryogenic temperatures Temperature range: -196°C to 121°C Available for 0.5ml, 0.75ml, 1.1ml and 1.4ml 2D coded tubes in 96 SBS racks, and for 1.2ml, 2ml and 5ml 2D coded tubes in…