Safety Apparel Suits

Safety Apparel Suits

Products (32)

Compare Tool

Select up to 3 products

  • Tyvek® 400 Pants

    Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an...

  • Cool Vest - Polycotton

    Lakeland Industries

    Style Number: CV55 Working in HazMat/Protective suits can make anyone lose their cool. The Phase Change Cool Vests™ worn under these suits give the user a greater degree of comfort. In fact, it creates a climate of 58° F. /14° C for up to three hours (depending on work environment)....

  • Cool Vest - Replacement Inserts - Set of 4

    Style Number: CV57 Replacement inserts for all Lakeland Phase Change Cool Vests™.

  • ChemMax® 4 Plus Encapsulated Suit - Flat Back/Rear Entry

    Style Number: C4T400Y ChemMax® 4 Plus advanced chemical barrier with expanded chemical data and higher hold-out times. Features: Elastic wrist, Flat back, Double storm flap, 20 mil PVC faceshield, Attached boots with boot flaps, Not gas/vapor tight, Rear entry, 48” zipper, 1 exhaust port...

  • Interceptor® Plus - Level A, Front Entry, Wide View Face Shield

    Style Number: INT640WB Interceptor® Plus the ultimate in chemical protection with the most extensive chemical data in the industry. Gas-Tight and Vapor-Tight with a Wide View Face Shield. Fentanyl: Protection for First Responders and Law Enforcement Due to the Fentanyl opioid crisis the risk of...

  • DuPont™ Tychem® Responder® CSM Encapsulated Level A Suits

    Tychem® Responder® CSM combines multiple film barriers laminated to both sides of a high-strength polypropylene substrate for high level protection against toxic and corrosive chemicals. It is effective for handling chemical warfare agents as well as military site cleanup and HazMat first...

  • ChemMax® 4 Plus Encapsulated Suit - Expanded Back/Rear Entry

    Style Number: C4T450Y ChemMax® 4 Plus advanced chemical barrier with expanded chemical data and higher hold-out times. Encapsulated Level B suit with expanded back. Features: Rear entry, Expanded back, Encapsulated suit (Level B), Yellow

  • ANSI Type R Class 2 Three Pocket Solid Breakaway Hi-Vis Apparel Vest

    Durable solid polyester vest|Breakaway provides additional safety around extreme traffic hazards, moving machinery or equipment|Hook and loop closures|2" silver reflective tape|2 internal lower pockets|1 external chest pocket with 1 pen pocket

  • Tychem® 10000 Encapsulated Training Suits with Front Entry & Serged Seams

    Tychem® 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® 10000 is...

  • DuPont™ Tychem® Responder® CSM Encapsulated Level A Suits

    Tychem® Responder® CSM combines multiple film barriers laminated to both sides of a high-strength polypropylene substrate for high level protection against toxic and corrosive chemicals. It is effective for handling chemical warfare agents as well as military site cleanup and HazMat first...

  • DuPont™ Tychem® Responder® CSM Encapsulated Level A Suits

    Tychem® Responder® CSM combines multiple film barriers laminated to both sides of a high-strength polypropylene substrate for high level protection against toxic and corrosive chemicals. It is effective for handling chemical warfare agents as well as military site cleanup and HazMat first...

  • Cool Vest - Banox FR Cotton

    Lakeland Industries

    Style Number: CV56 Working in HazMat/Protective suits can make anyone lose their cool. The Phase Change Cool Vests™ worn under these suits give the user a greater degree of comfort. In fact, it creates a climate of 58° F. /14° C for up to three hours (depending on work environment)....

  • Interceptor® Plus - Level A, Front Entry

    Style Number: INT640B Interceptor® Plus the ultimate in chemical protection with the most extensive chemical data in the industry. Gas-Tight and Vapor-Tight. Fentanyl: Protection for First Responders and Law Enforcement Due to the Fentanyl opioid crisis the risk of exposure to law enforcement,...

  • Interceptor® Plus - Level A, Rear Entry

    Style Number: INT650B Interceptor® Plus the ultimate in chemical protection with the most extensive chemical data in the industry. Gas-Tight and Vapor-Tight. Fentanyl: Protection for First Responders and Law Enforcement Due to the Fentanyl opioid crisis the risk of exposure to law enforcement,...

  • ANSI Type R Class 2 Two-Tone Eleven Pocket Surveyors Hi-Vis Apparel Vest with Solid Front and Mesh Back

    Solid front and mesh back for breathability|2" two-tone tape for optimum visibility|Zipper closure|2 mic tabs with reinforced stitching|2 lower external flap pockets|2 internal lower pocket|1 chest radio pocket|1 chest pocket with 4 pen pockets in front

  • Level A Test Kit for Lakeland Level A Suits

    Style Number: 00010 Pressure test kit for Lakeland Level A suits. Kit Features: Pressure testing for Lakeland Interceptor® level A suits per ASTM F1054 and EN464 (Pressure testing for Gas-Tight suits). Requires external air supply source. Exclusive for Lakeland Level A suits.

  • Tyvek® 400 Shirts

    Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an...

  • Interceptor® Plus Front Entry Training Suit

    Style Number: INT497B Interceptor® Plus training suits for "life like" training scenarios without damaging your real equipment Features: Front entry, Blue

  • Tychem® 10000 Encapsulated Level A Suits with Flat Back & Front Entry

    Tychem® 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® 10000 is...

  • Tychem® 10000 Encapsulated Level A Suits with Expanded Back & Front Entry

    Tychem® 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® 10000 is...

  • Tychem® 10000 Encapsulated Level A Suits with Rear Entry (Certified to NFPA 1994, Class 2)

    Tychem® 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® 10000 is...

  • Lakeland Test Kit with Integrated Air Compressor

    Style Number: 00220 Pressure test kit for Lakeland's Interceptor® Plus Level A suit. Kit Features: Adapter fittings for Lakeland's Interceptor Plus. Is self contained, meaning it has an internal air supply blower to inflate level A suits. Adaptable for both 220 V and 110 V electrical...

  • Interceptor® Plus Rear Entry Training Suit

    Style Number: INT491B Interceptor® Plus training suits for "life like" training scenarios without damaging your real equipment Features: Rear entry, Blue

  • Push-Lock® Glove System

    Lakeland Industries

    Style Number: JFR2 Lakeland's Push-Lock® Glove System is the "Tape-Free" way to attach your gloves to a chemical suit or coverall. Tested to a CE Type 3 Jet Test, take the guess work out of ensuring a leak-free fit between your gloves and PPE.

Compare Tool

Select up to 3 products