9 x 9, 70% IPA - 30% DI Water
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
PHARMA-SAT PLUS™ 70% IPA Sterile Polyester/Cellulose Wipers
Acute Care PharmaceuticalsPharma-Sat Plus™ wipers are low endotoxin, ISO Class 5, non-woven, 45% polyester / 55% cellulose blended wipers that are sterile. Our economical, non-shedding, pre-saturated wipers can be used throughout your cleanroom for cleaning, disinfecting, spill control and wipe down of products.…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
TekniCleanTM EX Quilted Polyester Wipers TekniClean EX o ers the perfect balance of clean and absorbency. This double-thick, quilted polyester wiper o ers layers of absorbent pockets to quickly and cleanly manage fluids in your critical environment APPLICATIONS Ideal for fluid and…
-
TekniZorb ™ LX Polycellulose Versatile, absorbent, and low shedding, TekniZorb ™ LX offers the performance needed to restore your controlled environment to its required cleanliness. APPLICATIONS Benchtop liner Product storage solution Spill management Plenum…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…
-
FREE-SAT™ ULTIMATE 70™ Pre-Saturated Polyester Wipers
High Tech ConversionsSealed edges Cleanroom Class 10 (ISO Class 4) 100% Polyester Pre-saturated in 70% IPA/30% DI Water FREE-SAT ULTIMATE 70™ pre-saturated wipers are made of 100% polyester. These wipes have heat sealed edges. A laser beam cuts and melts each fiber along the edges, eliminating…
-
AlphaWipe is constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern. Cleanroom laundered and packaged, AlphaWipe is an ultraclean and highly sorbent wiper ideal for critical environments. AlphaWipe has a laundered cut edge. It exhibits low particle and fiber…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…
-
Contec’s Slide ‘n Seal Bag is a resealable bag that allows easy dispensing of PROSAT® Polywipe-C presaturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed. Currently,…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
MiraSAT™ 70/30 Wipers
Foamtec InternationalMiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…
-
TekniCleanTM LX Polyester Knit Wipers Available in cleanliness levels for ISO 3 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding while e…
-
Tekniclean microfiber wipes are constructed with mixed weave yarn, as fine as 0.1 decitex, knitted extremely tight to ensure durability. The structure of the yarn (30% Nylon / 70% Polyester) provides hydrophilic properties of nylon, loipophilic polyester properties, and the capillary effect of the…
-
Cobalt Blue Sterile Pre-Saturated Polyester Wipes, ISO Class 3-4
High Tech ConversionsValidated Sterile – Gamma Irradiated Sealed-Edges ISO Class 3 & 4 (1-10) Cleanroom Wipe Cobalt Blue Pre-saturated 9 x 9 Validated Sterile Cleanroom Wipes – Polyester, saturated with 70% IPA / 30% DI Water. These premium grade class 3 and above cleanroom wipes contain four…
-
With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …
-
M1 Cleanroom Wipes, Pre-Saturated Non-Woven Microfiber with 70% IPA / 30% DI…
M1 (a Thomas Scientific Brand)Non-Woven Microfiber Pre-Sat Wipes: 80G/M2 Non-woven mechanically split microfiber sustrate compatible with ISO Class 5-6 (Class 100-1000) environments, Clean cut edges, Pre-saturated with ultra pure 70% IPA/30% DI Water, Best choice for contaminant "pick-up" and abrasion resistance in…
-
TekniMax ™ EX Knitted Microfiber Heavy-weight and durable, TekniMax™ EX utilizes a proprietary weaving pattern to create pillowed loops of sweeping power to efficiently wipe away micro-contamination from even the roughest surfaces. APPLICATIONS Best choice for…
-
Sterile Presat Wiper Validated Sterile by Gamma Irradiation Nonwoven Polyester Fabric 9"x9" Double Bagged
-
SATPAX® 1200 Sterile Wiper
BerkshireGamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO American National Standards and European Standards EN1174 and EN552. These pre-wetted sterile wipers are ideal for aseptic environments and support areas where microbial exclusion is…
-
Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…
-
Sterile SatPax 1000 combines Durx 670 nonwoven wipers composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester with a high saturation level of 70% IPA and 30% DI water. This pre-wetted format provides a cost effective and easy to use solution versus traditional bulk…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
SATPAX® 670 Sterile Wiper
BerkshireGamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO guidelines. The wipers have a higher saturation level to support the critical solution contact time needed in the regulated industries. 55% cellulose / 45% polyester…
-
Pre-Saturated Cleanroom Wipes
High Tech ConversionsFree-Sat Presaturated wipers are lint free, have four clean-cut edges and are packaged conveniently in flip-open tubs. The FS-NTP-911 comes in a peel-reseal bag. Range of substrate include: Polyester, poly-cellulose, polypropylene and cotton Saturation ranges from 50% to 99% IPA and also…
-
SATPAX® 670R Wiper
BerkshireSatPax® 670-R pre-wetted wipers are made with a higher saturation level to support the critical solution contact time needed in the regulated industries. The wiper is saturated with semiconductor grade isopropyl alcohol (IPA) and deionized water (DI) filtered to 0.2 µm. Economical 55%…