20 L
-
Color-Coded pH Buffers
Ricca ChemicalStandardized and certified traceable to NIST Standard Color-coded for quick reference Accuracy ±0.01 pH at 25°C pH temperature chart, lot numbers and expiration dates on each label pH 4.0 buffer is colored red, 7.0 buffer is yellow or green and 10.0 buffer is blue.…
-
Color-Coded pH Buffer Solutions
chemForce® (powered by Thomas Scientific)Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Acetone, BAKER ANALYZED ACS Reagent
Avantor - J.T.Baker®For Histological Use Formula: (CH3)2CO Formula Weight: 58.08 CAS Number: 67-64-1
-
Ricca Surface Cleaning Solutions
Ricca ChemicalThis product is intended for laboratory cleaning and disinfection purposes and is typically used for disinfection of surfaces. All components of this product are filtered as part of the manufacturing process. The residue after evaporation is typically 0.001% (10 ppm) maximum at the time of…
-
The LabChem 3.0N hydrochloric acid in liquid form, is soluble in water, ethanol and methanol. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 4% w/v boric acid with Indicator in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Phosphoric Acid, 10 Percent (v/v) Aqueous Solution
Spectrum ChemicalUN No.: UN1805 Class: 8 Pkg. Group: PG III
-
The LabChem 0.025N sodium thiosulfate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Glycerol, ACS Reagent
Reagents®Composition: Glycerin 100% Grade: ACS Reagent Boiling Point: 544°C (decomposes) CAS Number: 56-81-5 Density: 1.26 Chemical Formula: C3H8O3 Molecular Weight: 92.09 g/mol Melting Point: 18.2°C Color: Colorless liquid Physical State: Liquid Flash Point: 199°C Refractive Index:…
-
Hydrochloric Acid, 1.0N
chemForce® (powered by Thomas Scientific)Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.02 DOT: UN1789, HYDROCHLORIC ACID SOLUTION, 8, III Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: Corrosive
-
Methyl Alcohol, Anhydrous, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: CH3OH Formula Weight: 32.04 CAS Number: 67-56-1 Synonym(s): Methanol
-
-
Sulfuric Acid, 0.255 Normal
Ricca ChemicalFormula: H2SO4 Formula Weight: 98.08 CAS Number: 7664-93-9 Description: Suitable for Crude Fiber Analysis of Food and Feed
-
Hydrochloric Acid, 1.00 Normal
Ricca ChemicalFormula: HCl Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): N/A
-
USP Purified Water (USP-PW)
USultraDescription USP Purified Water (USP-PW) Applications Purified Water is used as an excipient in the production of non-parenteral preparations and in other pharmaceutical applications, such as cleaning of certain equipment’s and non-parenteral product-contact components. Purified…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Xylenes, AR® (ACS)
Avantor - Macron Fine Chemicals™Formula: C6H4(CH3)2 Formula Weight: 106.17 CAS Number: 1330-20-7 Description: For Histological Use
-
Concentration: 0.02N in Methanol Composition: Methyl Alcohol 99.84%, Potassium Hydroxide 0.14%, Water 0.02% Boiling Point: Approximately 64.5°C Density: 0.8 Melting Point: -98°C Color: Colorless liquid Physical State: Liquid Flash Point: 11°C pH Range: 12.3 Solubility Information:…
-
LabChem 1:1 Acetone-Alcohol
LabchemThe LabChem 1:1 acetone-alcohol in liquid form, is soluble in water. It is highly flammable in liquid as well as vapor and has mild odor. Application: For Laboratory and Manufacturing Use Only
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
2-Propanol, for HPLC, 99.5%
MilliporeSigma2-Propanol (i-PrOH), a renewable secondary alcohol, is water soluble, colorless, volatile liquid with a sweet odor. It is a potential substitute to petroleum-derived gasoline. Preparation of methyl isobutyl ketone (MIBK) using 2-propanol as the precursor has been reported with yield as high as 25%.…
-
Buffer, Reference Standard, pH 4.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
Ricca 0.0200 Normal (N/50) Hydrochloric Acid
Ricca ChemicalThe Ricca Chemical hydrochloric acid with a composition of 99.93% water and 0.07% hydrochloric acid, is used to neutralize alkaline agents. It is suitable for use in food, textile, metal, photographic and rubber industries. It can be stored at a temperature of 15 to 30 degree C.
-
Concentration: 20% w/w Composition: Water 80%, Potassium Fluoride Dihydrate 20% Density: 1.19 Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Synonyms: Potassium Fluoride Dihydraterate Shelf Life: 24 Months Storage: Ambient DOT: UN3422, POTASSIUM…
-
Hydrochloric Acid, 37 Percent, NF
Spectrum ChemicalGrade: NF CAS No.: 7647-01-0 UN No.: UN1789 Class: 8 Pkg. Group: PG II
-
Sulfuric Acid, 6.0N, Standardized
Reagents®Concentration: 6N Composition: Water 74%, Sulfuric Acid 26% Boiling Point: Approximately 100°C Density: 1.18 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT:…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
LabChem 37% w/w ACS Formaldehyde
LabchemThe LabChem 37% w/w ACS formaldehyde in liquid form, is soluble in water, ethanol, methanol, ether and acetone. It is non-flammable and has irritating/pungent odor. Application: For Chemical Intermediate, Disinfectant, Laboratory Chemical
-
EDTA Titrant, 0.1M, Standardized
Reagents®Concentration: 0.100M Composition: Water 96.34%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 3.66% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …
-
Ricca 2 Normal Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Sodium Chloride, 0.85% (w/v) Solution, Normal Saline
Spectrum ChemicalSodium Chloride, 0.85 Percent (w/v) Solution, Normal Saline - Ungraded products supplied by Spectrum are indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.