20 L
-
Color-Coded pH Buffers
Ricca ChemicalStandardized and certified traceable to NIST Standard Color-coded for quick reference Accuracy ±0.01 pH at 25°C pH temperature chart, lot numbers and expiration dates on each label pH 4.0 buffer is colored red, 7.0 buffer is yellow or green and 10.0 buffer is blue.…
-
OmniSolv® Methanol Gradient Grade
MilliporeSigmaSynonyms: Methyl alcohol Molecular Formula: CH4O Molecular Weight: 32.04 Linear Structural Formula: CH3OH MDL Number: MFCD00004595 Purity: >=99.9% (GC) Melting Point: -98 C (lit.) Density: 0.791 g/mL at 25 C (lit.) Refractive Index: n20/D 1.329 (lit.) …
-
Description ASTM Type I Reagent Grade Water (D1193-99e1) (ASTM1) Applications Type 1 laboratory grade water is required for critical laboratory applications such as HPLC mobile phase preparation, blanks and sample dilution in GC, HPLC, AA, ICP-MS and other advanced analytical…
-
Water, ACS Reagent Grade, ASTM Type I, ASTM Type II
Ricca ChemicalFormula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers
-
Potassium Chloride, 0.020N, Standardized
Reagents®Concentration: 0.02N Composition: Water 99.85%, Potassium Chloride 0.15% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.
-
Molecular Biology Grade Water
Quality BiologicalMolecular Biology Water is prepared by reverse osmosis, passed through fine carbon, deionized through two resin beds, and serially filtered through 0.1 µm positively charged membranes, to yield a product with an endotoxin level of less than 0.03 EU/mL. DNase, RNase and protease tested Endotoxin…
-
Strong Ammonia Solution, NF
Spectrum ChemicalGrade: NF CAS No.: 1336-21-6 UN No.: UN2672 Class: 8 Pkg. Group: PG III
-
The LabChem 0.025N sodium thiosulfate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Potassium Permanganate, Solution, 0.1 N
GFS ChemicalsKMnO4 CAS#: 7722-64-7 F.W.: 158.04 NFPA#: 2-0-1 Oxidimetric standard. Frequent restandardization recommended. 0.02 mol/L
-
Ricca 0.01 Normal Sodium Thiosulfate
Ricca ChemicalSodium thiosulfate is an inorganic compound with the formula Na2S2O3·xH2O. Typically it is available as the white or colorless pentahydrate, Na2S2O3·5H2O. The solid is an efflorescent crystalline substance that dissolves well in water.
-
USP Purified Water (USP-PW)
USultraDescription USP Purified Water (USP-PW) Applications Purified Water is used as an excipient in the production of non-parenteral preparations and in other pharmaceutical applications, such as cleaning of certain equipment’s and non-parenteral product-contact components. Purified…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
The LabChem 0.1N sulfuric acid in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
-
Clear pH Buffer Solutions
chemForce® (powered by Thomas Scientific)Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Buffer Standard, pH 7.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
n-Propyl Alcohol, Reagent, ACS
Spectrum ChemicalGrade: Reagent, ACS CAS No.: 71-23-8 UN No.: UN1274 Class: 3 Pkg. Group: PG III
-
The LabChem TCLP colorless extraction fluid solution in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Buffer Standard, pH 10.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
Heptane, Reagent
Spectrum ChemicalGrade: Reagent CAS No.: 142-82-5 UN No.: UN1206 Class: 3 Pkg. Group: PG II
-
The LabChem 1.0N sodium hydroxide in liquid form, is non-flammable and odorless. Application: For Laboratory and Manufacturing Use Only
-
Hydrochloric Acid, 1.0 Normal Volumetric Solution, StandARd
Avantor - Macron Fine Chemicals™CAS Number: 7647-01-0 Specific Gravity: 1L = 1.01 Kg
-
Isopropyl Alcohol, ACS Grade
chemForce® (powered by Thomas Scientific)Harmonized #: 2905.12.0050 0050 Shelf Life (months): 60 Specific Gravity: 0.78 DOT: UN1219, ISOPROPANOL, 3, II Appearance: Colorless Physical State: Liquid Flash Point: 12°C Solubility: Miscible Storage Temperature: Ambient Storage Code: Flammable
-
GR ACS Acetone
MilliporeSigmaSynonyms: Dimethyl Ketone, 2-Propanone Molecular Formula: C3H6O Molecular Weight: 58.08 Linear Structural Formula: CH3COCH3 MDL Number: MFCD00008765 Purity: >=99.5% (corrected for water content, GC) Melting Point: -94 C (lit.) Density: 0.791 g/mL at 25 C (lit.) …
-
Xylenes, AR® (ACS)
Avantor - Macron Fine Chemicals™Formula: C6H4(CH3)2 Formula Weight: 106.17 CAS Number: 1330-20-7 Description: For Histological Use
-
Methyl Alcohol, Anhydrous, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: CH3OH Formula Weight: 32.04 CAS Number: 67-56-1 Synonym(s): Methanol
-
Buffer Solution
GFS ChemicalsThe pH of a sample is an indication of its acidity or alkalinity and pH determination is one of the most commonly conducted laboratory measurements. The term pH is defined as the negative logarithm (base 10) of the Hydrogen ion concentration (or, more accurately, Activity) expressed in molarity.…
-
Boric Acid, 4%
Ricca Chemical(w/v) Aqueous Solution with Bromocresol Green-Methyl Red Indicator, for Kjeldahl Nitrogen Analysis Formula: H3BO3 Formula Weight: N/A CAS Number: 10043-35-3
-
The LabChem 4 pH acetate buffer in slight vinegar odor, is perfect for chlorine and iodine. Application: For Laboratory and Manufacturing Use Only
-
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…