20 L
-
Hydrochloric Acid, 37%, Superior (ACS)
GFS ChemicalsHCl CAS#: 7647-01-0 F.W.: 36.46 Metals analysis reported on certificate in ppm.
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Hydrochloric Acid, 1.0N, Standardized
Reagents®Concentration: 1N Composition: Water 96.30%, Hydrochloric Acid 3.70% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 0.1 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT:…
-
Ricca 0.1 Normal (N/10) Nitric Acid
Ricca ChemicalNitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water.
-
-
Hydrochloric Acid, 0.010N, Standardized
Reagents®Concentration: 0.01N Composition: Water 99.96%, Hydrochloric Acid 0.04% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 2 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.
-
-
Methanol
Reagents®Composition: Methyl Alcohol 99.99%, Potassium Hydroxide 0%, Water 0% Density: 0.79 Melting Point: -98°C Color: Colorless liquid Physical State: Liquid Flash Point: 11°C pH Range: 7 Refractive Index: 1.328 to 1.33nD Solubility Information: Miscible Shelf Life: 6 Months …
-
Sulfuric Acid, 4.0N, Standardized
Reagents®Concentration: 4N Composition: Water 82.04%, Sulfuric Acid 17.96% Boiling Point: Approximately 100°C Density: 1.12 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …
-
Concentration: 25% w/w Composition: Water 74.87%, Hydrochloric Acid 25.13% Boiling Point: Approximately 100°C Density: 1.13 Melting Point: Approximately -28°C Color: Colorless liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage:…
-
-
Acetone, ACS Reagent
Reagents®Composition: Acetone 100% Assay Percent: Minimum 99.5% Grade: ACS Reagent Boiling Point: 56.05°C at 1013.25 hPa CAS Number: 67-64-1 Density: 0.8 Chemical Formula: (CH3)2CO Molecular Weight: 58.08 g/mol Melting Point: -94.7°C Color: Colorless…
-
Mineral Oil, Medium
Reagents®Composition: Mineral Oil 100% Boiling Point: 300°C CAS Number: 8012-95-1 Density: 0.85 Molecular Weight: 0 g/mol Melting Point: -24°C Color: Colorless liquid Physical State: Liquid Flash Point: 193°C Solubility Information: Insoluble Shelf Life: 120 Months Storage: Ambient …
-
-
Water, ACS Reagent Grade, ASTM Type I, ASTM Type II
Ricca ChemicalFormula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers
-
OmniSolv® Acetonitrile, Anhydrous
MilliporeSigmaFormula: CH3CN Formula Weight: 41.05 CAS Number: 75-05-8 Synonym(s): Methyl Cyanide
-
Hydrochloric Acid, 1.0334N, Standardized
Reagents®Concentration: 1.1033N Composition: Water 96.18%, Hydrochloric Acid 3.82% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 0.1 Solubility Information: Miscible Shelf Life: 24 Months Storage:…
-
Sulfuric acid solution, volumetric, 0.1N in water
BeanTown ChemicalCAS: 7664-93-9 MDL No: MFCD00064589 Liquid Linear Formula: H2SO4 MW: 98.08
-
Ricca 0.250 Normal (N/4) Potassium Hydroxide
Ricca ChemicalPotassium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
-
CAS Number: 7732-18-5 Shelf Life (Months): 12
-
Sodium Hydroxide, 1.0N
chemForce® (powered by Thomas Scientific)Harmonized #: 2815.12.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.04 DOT: UN1824, SODIUM HYDROXIDE SOLUTION, 8, III Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient …
-
Ricca 0.01 Normal (N/100) Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Test Name Appearance Assay at 20 °C (traceable to NISTSRM 83) Assay Method Clarity, Color, Odor Titrimetric vs. Arsenic Trioxide (Ferroin Indicator) Specification Clear, orange, odorless 0.1000 ± 0.0001 N at 20°C
-
Isopropyl Alcohol, U.S.P.
Avantor - Macron Fine Chemicals™Formula: CH3CHOHCH3 Formula Weight: 60.10 CAS Number: 67-63-0
-
-
Buffer Standard, pH 7.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
The LabChem 0.01M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only Titrant for water hardness
-
The Exaxol acetate buffer features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
Ceric Sulfate is a powerful and versatile oxidizing agent that possesses certain advantages over Potassium Dichromate and Potassium Permanganate. These advantages include increased stability, ability to be used in a high concentration of Hydrochloric Acid (where Potassium Permanganate is…
-
Hydrochloric Acid, 1.0 Normal Volumetric Solution, StandARd
Avantor - Macron Fine Chemicals™CAS Number: 7647-01-0 Specific Gravity: 1L = 1.01 Kg